LT11004V LETEX | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Letex Technology Corp. High capacity in a slim SIL package Absolute Maximum Ratings (Ambient temperature: 25C ) Item Symbol LT11004V(F) Unit Remarks Input LED Forward Current IF 50 mA LED Reverse Voltage VR 5 V Peak forward current IFP 1 A f = 100Hz, Duty Ratio = 0.1% Power Dissipation Pin 75 mW Output Load voltage (Peak AC) VL 100 V Continuous load current IL 4.5 A Peak AC, DC Peak load current Ipeak 8.0 A 100 ms (1shot), VL = DC Power dissipation Pout 1.6 W Total power dissipation PT 1.6 W I/O isolation voltage Viso 2500 Vrms Ambient temperature Operating Topr -40 to +85 ℃ (Non-icing at low temperatures) Storage Tstg -40 to +100 ℃ GENERAL DESCRIPTION: 1. High capacity type power PhotoMOS. Can switch a wide range of currents and voltages. Can control various types of loads, from very small loads to a max. 4.5A AC/DC current for sequencers, motors, and lamps. 2. Low on-resistance and high sensitivity. Low on-resistance of less than Typ. 0.035. High sensitivity LED operate current of Typ. 3 mA. 3. AC/DC dual use Bi-directional control is possible. There is no need to differentiate depending on the load as was necessary with the conventional SSR. FEATURES: Optically isolated Low On - state resistance Low input power consumption MOSFET output thyristor Ultra slim and light weight, Sil terminals type for high density mounting: --Size:5.4(W) x 20.3(L) x 12.6(H) mm; --Weight: approximately 3.0g APPLICATIONS: Temperature control system Industrial automatic control Lighting system Office appliance Factory appliance Traffic signals Measuring instruments Industrial machines Mercury relay replacement PIN CONFIGURATION: LT1 OOOOV AC/DC Type (1) Input: DC - (2) Input: DC + (3) Output: DC or AC (4) Output: DC or AC LT1 OOOOV(F) AC/DC Type (1) Input: DC + (2) Input: DC - (3) Output: DC or AC (4) Output: DC or AC
Letex Technology Corp. High capacity in a slim SIL package Electrical Characteristics (Ambient temperature: 25C) Item Symbol LT11004V(F) Unit Condition Input LED Operate Current Typical IFon 1.0 mA IL = 100 mA VL = 10 V Maximum 3.0 mA LED Turn off Current Minimum IFoff 0.4 mA IL = 100 mA VL = 10 V Typical 0.9 mA LED Dropout Voltage Typical VF 1.25 V IF = 50 mA Maximum 1.5 V Output On resistance Typical Ron 0.035 Ω IF = 10 mA IL = Max. Within 1 s Maximum 0.06 Ω Off state leakage current Maximum ILeak 10 μA IF = 0 mA VL = Max. Transfer characteristics Turn on time* Typical Ton 0.8 ms IF = 10 mA IL = 100 mA VL = 10 V Maximum 3.0 ms Turn off time* Typical Toff 0.1 ms IF = 10 mA IL = 100 mA VL = 10 V Maximum 1.0 ms I/O capacitance Typical Ciso 0.8 pF f = 1 MHz VB = 0 V Maximum 1.5 pF Initial I/O isolation resistance Minimum Riso 1000 MΩ 500 V DC Max. operating frequency Maximum --- 0.5 cps IF = 10 mA Duty factor = 50% IL = Max., VL = Max.
Letex Technology Corp. High capacity in a slim SIL package Dimensions (Unit:mm)) LT1OOOOV LT1OOOOV (F) P.C.B Layout (Bottom View)( Unit:mm) LT1 OOOOV LT1 OOOOV (F) 20.3 m a x. 3.5 2-0.8 0.3 2.54 10.16 1.1 2-0.8 0.3 5.08 5.4 m a x. 12.1max. 0.213 m a x. 20.3 m a x. 3.5 2-0.8 0.3 2.54 8.89 1.1 2-0.8 0.3 5.08 5.4 m a x. 12.1max. 3.55 0.213 m a x. 2.54 4- 1.2 10.16 5.08 2.54 3.55 4- 1.2 8.89 5.08
Letex Technology Corp. High capacity in a slim SIL package Macking (Bottom View): Marking (Each photo MOS Relay shall be marked with the following information) LETEX R923 LT11004 Brand Name Part Name Date Code 100V/4.5A Spec RoHS R923 Weeks Monthly Year Note: 1. Devices are pockets in accordance with EIA standard EIA-481-A and specifications given above. 2. Packaging:1 Box 1,000 pcs