LT10.7MA5AP TOKEN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

LT10.7M Ceramic Filters for FM Receiver Ceramic Filters for FM Receiver (LT10.7M) Ceramic Filters are Compatible Murata SFELF10M7 Preview Token LT10.7M series are monolithic devices whichutilize the energy-trapped thickness vibration-mode. This principle of operation is based upon the fact that an excellent resonating element with low spurious vibration can be obtained by adhering to certain theoretical parameters of design. These parameters include the physical dimensions of the peizo element, the electrode pattern, and the associated mass loading effect of the electrodes. Token categorizes the LT 10.7 family according to rank of center frequency. This ranking indicates that a given LT 10.7 will be marked with one of the colors listed in the following chart and will exhibit the center frequency in Technical Characteristics Table. The LT10.7M offers three series: LT10.7M for FM Receiver (Compatible Murata SFELF10M7), LT10.7M A10 950 kHz at 20dB/Narrow Band-width 95 kHz at 20dB (Compatible Murata SFELF10M7 DBS Receiver). LT10.7M Narrow Band-width series features stable low spurious and temperature characteristics. This series is suitable for European car-audio or AM up conversion use that needs narrow band characteristics are stable. LT10.7M Wide Band-width series are specified to make up conventional ceramic filters which wider band characteristics not obtained. Custom parts are available on request. Token will also produce devices outside these specifications to meet specific customer requirements, please contact our sales for more information.

Applications

  • Change in center frequency is typically within ±30ppm/°C at -20°C to +80°C. - Various band widths are available for applications in wide to narrow bands. - Low loss, favorable waveform symmetry, and high selectivity. - These miniature filters have high mechanical strength. - Excellent shape factor of frequency response. - Small dispersion and stable characteristics. - Good waveform symmetry. - High reliability. TOKEN

LT10.7M Ceramic Filters for FM Receiver Dimensions FM Receiver (Murata SFE10M7 FM-IF Compatible) Technical Characteristics Color 2 Color 1 7.0±2.0 7.0±2.05.0±1.0 0.3±0.1 2.5±0.32.5±0.3 0.5±0.1 2.5±0.3 Color 1:A5,S2,JA10 Color 2:S3,HY ① Input ② Ground ③ Output 4.0max L10.7A ③ ② ① Part Number 3dB Band Width (kHz) 20dB Band Width (kHz) max Insertion Loss (dB) max Spurious Attenuation (9-12MHz)(dB)min LT10.7MA5 280±50 650 6 30 LT10.7MS2 230±50 600 6 40 LT10.7MS3 180±40 520 7 40 Note: Input/Ouput Impedance:330Ω Low - Loss Type (Murata SFE10M7 A10 Compatible) Technical Characteristics PartNumber 3dB Band Width(kHz) 20dB Band Width(kHz) max Insertion Loss(dB) Spurious Attenuation (9-12MHz)(dB)min LT10.7MA5A10 280±50 590 2.5±2.0 30 LT10.7MS2A10 230±50 520 3.0±2.0 35 LT10.7MS3A10 180±40 470 3.5±1.5 35 LT10.7MJA10 150±40 360 4.5±2.0 35 Note: Input/Ouput Impedance:330Ω Wide/Narrow Band-width (Murata SFE10M7 DBS Receiver Compatible) Technical Characteristics Part Number 3dB Band Width (kHz) 20dB Band Width (kHz) max Insertion Loss (dB) Spurious Attenuation (9-12MHz)(dB)min LT10.7MA19 350min 950 3.0±2.0 20 LT10.7MA20 330±50 680 4.0±2.0 30 LT10.7MHY 110±30 350 7.0±2.0 30 LT10.7MFP 20min 95 6.0max 24(10.7±1.0MHz) Note: Input/Ouput Impedance:470Ω(MA19),330Ω(MA20,MHY),600Ω(MFP) TOKEN

LT10.7M Ceramic Filters for FM Receiver LT10.7MA5 LT10.7MS2 LT10.7MS3 Attenuation(dB) Frequency(MHz) Attenuation(dB) Frequency(MHz) Frequency(MHz) Attenuation(dB) Rg S.S.G C RF V.M Rg + R1 = R2 = 330 Ω C = 10pF Including stray capacitance and input capacitance of RF voltmeter 1. When using ceramic filters, it is most important to match the input/output load to impedance 330 ohm (LT10.7MA19 is 470 ohm matching). Waveform symmetry is damaged when reactance is added to the input/output load. 2. Two ceramic filters directly connected can be used for high selectivity. For reducing waveform variation, it is recommended to input a buffer AMP between ceramic filters. 3. The LT10.7M series are of input/output symmetric structure so that in theory there is no input/output directionality. Actual circuits may use different input/output loading conditions (for example, mismatched impedance) or capacitance load. In such cases, the waveform will be a little changed by the direction of the input/output of the ceramic filters. TOKEN

LT10.7MA5 A Standard Marking Color Center Frequency Color D:10.64MHz±30kHz Black B:10.67MHz±30kHz Blue A:10.70MHz±30kHz Red C:10.73MHz±30kHz Orange E:10.76MHz±30kHz White P  Part Number  Center Frequency color code  Package LT10.7M Ceramic Filters for FM Receiver Back to 1st Page - Chip Ceramic Filters - LTCS10.7M TOKEN Part Number LT10.7MA5 LT10.7MS2 LT10.7MS3 LT10.7MA5A10 LT10.7MS2A10 LT10.7MS3A10 LT10.7MJA10 LT10.7MA19 LT10.7MA20 LT10.7MHY LT10.7MFP Code Center Frequency color code A 10.70MHz±30kHz Red B 10.67MHz±30kHz Blue C 10.73MHz±30kHz Orange D 10.64MHz±30kHz Black E 10.76MHz±30kHz White Code Package P Bulks TB Tab Box