LST0X00 HP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Industry Standard FC and ST® Connectors
  • 1300 nm Wavelength
  • Linewidth <110 nm
  • High Reliability
  • Range of Flange Options
  • -40 °C to +80°C Operation

Applications

  • Optical Data Communication Transmitters
  • E-O Convertors
  • LANS
  • FDDI Networks
  • FITL
  • Single Mode: LST0400 Multimode: LST0500 The LST range of products includes a wide variety of connectorized ELED emitters for both single mode and multimode operation. The products have been developed for low cost and wide operating temperature applications such as telecom FITL and datacom FDDI LANS. Vari- ants are available in industry standard connector types with a selection of mounting flange options. The product range features a high reliability ridge waveguide ELED manufactured using our MOVPE process. The construction of the products includes a hermetically sealed ELED and is designed to be compatible with the environmen- tal requirements of the Bellcore TA-TSY-000983 document. Connectorized ELEDS

Absolute maximum limits mean that no catastrophic damage will occur if the product is subjected to these ratings for short periods, provided each limiting parameter is in isolation and all other parameters have values within the performance specification. It should not be assumed that limiting values of more than one parameter can be applied to the product at the same time. Performance Specification Launched Optical Power Optical Power Over Temp. Central Wavelength Spectral Width Wavelength Temp Coefficient Rise/Fall Times Forward Voltage Reverse Leakage Parameter Forward Current Reverse Voltage Operating Temperature Storage Temperature Soldering If Vr Tc Ts DC DC 10 seconds mA V Min Max Limits 175 +80 +85 260 -40 -40 Symbol Po dPo/dT λ Δλ dλ/dT τr/τf Vf Vr Units 1285 Test Conditions CW, Tc = 25°C, If = 100mA unless otherwise stated LST0400: into 9/125 fiber LST0500: into 50/125 fiber Tc = -40°C to +80°C Tc = -40°C to +80°C Tc = -40°C to +80°C 10% to 90% points Bias = -2 V MaximumMinimum ± 6 1345 110 0.8 1.7 200 µW µW dB nm nm nm/°C nS V µA Electrical Pin Out Parameter Symbol Conditions Units LST0X00 Pinouts PIN 1 – NO CONNECTION PIN 2 – CATHODE (-ve) PIN 3 – ANODE (+ve) SLO -

DIM. MIN. MAX. A B C ∅ D E ∅ F ∅ G H 12.0 0.41 M8 x 0.75 13.35 19.50 9.50 13.0 9.0 0.47 13.55 ALL DIMENSIONS IN MILLIMETERS DIM. MIN. MAX. ∅ J ∅ K L M N P ∅ Q 2.08 2.54 NOM. 2.32 4.20 1.70 2.20 4.80 8.20 C M N P ∅ G L ∅ J B ∅ K AH∅ D ∅ F ∅ Q E REAR VIEW TOP VIEW FRONT VIEW Mechanical Outline Options LST0X00-FC-A LST0X00-ST-F LST0X00-ST-F Mech Dimen DIM. MIN. MAX. A B C D E F ∅ G 1.8 9.6 9.3 9.43 3/8-32 UNEF-2A 21.0 2.2 9.8 12.9 9.7 9.63 ALL DIMENSIONS IN MILLIMETERS DIM. MIN. MAX. ∅ H J ∅ K ∅ N P Q R 2-56 UNC-2B 12.0 0.41 2.54 NOM. 14.9 2.54 NOM. 0.50 NOM. 0.47 15.3 ∅ H B C F ∅ K ∅ N J REAR VIEW TOP VIEW E D A P ∅ G Q R

Ordering Information

ST ® is a Registered Trademark of AT&T Flange Type: A = 2 Hole Panel Mount F = 2 Hole PCB Mount, Threaded Preferred Options: LST0400-FC-A LST0400-ST-F LST0500-FC-A LST0500-ST-F Additional options are available to meet your specific needs. Please contact your local representative for details. Fiber Type: 4 = Single mode 5 = Multimode Connector Type: FC = FC ST ® = ST