LSK

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

+ Snap-in terminal type + 105°C, 5,000 hours assured + Suitable for medium to high voltage circuits + RoHS Compliance . . Sleeve & Marking Color: Black & White Specifications [tems Rrformance Category Temperature Range -25°C ~ +105°C Capacitance Tolerance 320% (at 120Hz, 20°C) 7 -3Vcr or 1.5 mA whichever is smaller (after 5 minutes) Lestgo Gaon fat 27) Tan8 (ab 20eT20°C Rated Voltage! 160 | 200 | 250 | 315 | 350 | 400 | 420 | 450 | 500 g Heel Tand (max) | 0.16 | 0.15 | 0.15 | 015 | 015 | 015 | 015 | 018 | 0.15 Impedance ratio shall not exceed the values given in the table below. Low Temperature 200 | 250 | 315 | 350 | 400 | 420 | 450 | 500 ‘Characteristics (at 120Hz) Impedance | asso 4 [4] 4/4) 4/8) ese Test Time 5,000 Hrs Within +25% of initial value Endurance Less than 250% of specified value Within specified value * The above Specifications shall be satisfied when the capacitors are restored to 20°C after the rated voltage applied with rated ripple current for 5,000 hours at 105°C. 7,900 Hee Capacitance Change Within +20% of initial value Shelf Life Test Tand Less than 150% of specified value Leakage Current Within specified value * The above Specifications shall be satisfied when the capacitors are restored to 20°C after exposing them for 1,000 hours at 105°C without voltage applied. The rated voltage shall be applied to the capacitors before the measurements (Refer to JIS C 5101-4 4.1). Ripple Current & Frequency Frequency (Hz) 50/60 | 100/120 | 300 1k 10k up Multipliers Multiplier 08 1.0 14 1.3 1.4 Failure percentage = 3% (During useful life) Failure rate S 70 fit (70 10°/h) Diagram of Dimensions Unit: mm. Sleeve 4.0405 Vent ' = 2-p 2404 A 1 7 FI D) 8} ® ' zy a y Plate & _ (S) ' nae) L L+2 Max y PC board pin-out All product specifications in the catalog are subject to change without notice. (CAT. 2014E1)

Klik URGE. = Aluminum Electrolytic Capacitors Lsk Dimension & Permissible Ripple Current ; Capacitance Ripple Current ESR tc Men eto 20H, 20°C a 120 Hz, 105°0 at 2a ore 120H2, 20% © S minutes Part Number uF Alms 5 Q mA 160 390 22x 35 1.05 0.15 0.510 0.75 LSK391M2C--A2235 470 20x 40 1.16 0.15 0.423 0.82 LSK471M2C--A2040 470 22 x 40 1.23 0.15 0.423 0.82 LSK471M2C--A2240 470 25 x 30 1.47 0.15 0.423 0.82 LSK471M2C--A2530 560 22x 45 141 0.15 0.355 0.90 LSK561M2C--A2245 560 25 x 35 1.36 0.15 0.355 0.90 LSK561M2C--A2535 560 30 x 25 1.32 0.15 0.355 0.90 LSK561M2C--A3025 680 22 x 50 1.63 0.15 0.293 0.99 LSK681M2C--A2250 680 25 x 40 1.59 0.15 0.293 0.99 LSK681M2C~-A2540 680 30 x 30 1.56 0.15 0.293 0.99 LSK681M2C--A3030 820 25 x 45 1.83 0.15 0.243 1.09 LSK821M2C--A2545 820 30 x 35 1.83 0.15 0.243 1.09 LSK821M2C--A3035 820 35 x 30 1.89 0.15 0.243 1.09 LSK821M2C--A3530 4,000 25 x 50 2.12 0.15 0.199 1.20 LSK102M2C--A2550 1,000 30 x 40 2.13 0.15 0.199 1.20 LSK102M2C--A3040 1,000 35 x 30 2.08 0.15 0.199 1.20 LSK102M2C--A3530 4,200 30 x 45 2.48 0.15 0.166 131 LSK122M2C--A3045 4,200 35 x 35 2.42 0.15 0.166 1.31 LSK122M2C--A3535 4,500 30 x 50 2.88 0.15 0.133 1.47 LSK152M2C--A3050 1,500 35 x 40 2.86 0.15 0.133 1.47 LSK152M2C--A3540 1,800 35 x 45 3.29 0.15 ont 1.50 LSK182M2C--A3545 200 180 22 20 0.59 0.15 4.106 057 LSK181M2D--A2220 220 22x 25 0.72 0.15 0.905 0.63 LSK221M2D--A2225 220 25 x 20 om 0.15 0.905 0.63 LSK221M2D--A2520 270 22 x 30 0.81 0.15 0.737 0.70 LSK271M2D--A2230 270 25 x 25 0.81 0.15 0.737 0.70 LSK271M2D--A2525 330 22x 35 0.92 0.15, 0.603 077 LSK331M2D--A2235 330 30 x 20 0.87 0.15 0.603 077 LSK331M2D--A3020 390 22x 40 1.02 0.15 0.510 0.84 LSK391M2D--A2240 300 25 x 30 4.01 0.15 0.510 0.84 LSK391M2D--A2530 390 30 x 25 1.01 0.15 0.510 0.84 LSK391M2D--A3025 390 35 x 20 1.02 0.15 0.510 0.84 LSK391M2D--A3520 470 22% 45 1.10 0.15 0.423 0.92 LSK471M2D--A2245 470 25x 35 1.15 0.15 0.423 0.92 LSK471M2D--A2535 470 35 x 20 1.42 0.15 0.423 0.92 LSK471M2D--A3520 560 22 * 50 1.22 0.15 0.355 1.00 LSK561M2D--A2250 560 25 x 40 1.19 0.15 0.355 1.00 LSK561M2D--A2540 560 30 x 30 1.47 0.15 0.355 1.00 LSK561M2D--A3030 560 36 x 25 131 0.15 0.355 1.00 LSK561M2D--A3525 680 25 x 45 1.38 0.15 0.293 4.11 LSK681M2D--A2545 680 30 x 35 137 0.15 0.293 11 LSK681M2D--A3035 820 30 x 40 1.50 0.15 0.243 4.21 LSK821M2D--A3040 820 36 x 30 1.46 0.15 0.243 1.21 LSK821M2D--A3530 1,000 30 x 50 1.91 0.15 0.199 1.34 LSK102M2D--A3050 1,000 36 x 35 172 0.15 0.199 1.34 LSK102M2D~-A3535 1,200 35 x 40 1.93 0.15 0.166 1.47 LSK122M2D--A3540 1,500 35 x 50 2.37 0.15 0.133 1.50 LSK152M2D--A3550 1,800 35 x 55 2.70 0.15 o1tt 1.50 LSK182M2D--A3555 250 150 22x 25 0.57 0.15 1.327 0.58 LSK151M2E--A2225 180 25 x 20 061 0.15 4.106 0.64 LSK181M2E--A2520 220 22x 30 0.68 0.15 0.905 0.70 LSK221M2E--A2230 220 25 x 25 0.75 0.15 0.905 0.70 LSK221M2E--A2525 220 30 x 20 0.7 0.15 0.905 0.70 LSK221M2E--A3020 270 22x 35 0.78 0.15 0.737 078 LSK271M2E--A2235 270 25 x 30 0.83 0.15 0.737 0.78 LSK271M2E--A2530 270 30 x 20 0.79 0.15 0.737 078 LSK271M2E-A3020 270 35 x 20 0.86 0.15 0.737 0.78 LSK271M2E--A3520 330 22x 40 0.91 0.15 0.603 0.86 LSK331M2E--A2240 330 25 x 35 0.96 0.15 0.603 0.86 LSK331M2E--A2535 300 22 * 50 1.08 0.15 0.510 0.94 LSK391M2E--A2250 300 25 x 40 1.07 0.15 0.510 0.94 LSK391M2E--A2540 390 30 x 30 1.07 0.15 0.510 0.94 LSK391M2E--A3030 470 22 x 50 4.42 0.15 0.423 1.03 LSK471M2E--A2250 470 25x 45 1.15 0.15 0.423 1.03 LSK471M2E-A2545 470 30 x 35 1.19 0.15 0.423 1.03 LSK471M2E--A3035 All product specifications in the catalog are subject to change without notice. (CAT. 2014E1)

4 F ‘ ‘

Ill URGE = Aluminum Electrolytic Capacitors LSk Dimension & Permissible Ripple Current ; Capacitance Ripple Current ESR es) 120K, 20°C ODL tO He, 105°C Dean ogre 120H2, 200 5 — Part Number " uF mm Alms 9t 120H2, Q mA 250 470 35 x 25 4.10 0.15 0.423 1.03 LSK471M2E~-A3525 560 25 * 50 131 0.15 0.355 1.12 LSK561M2E~A2550 560 30x 35 4.25 0.15 0.355 1.12 LSK561M2E--A3035 560 35 x 30 1.29 0.15 0.355 4.42 LSK561M2E~-A3530 680 30 x 40 1.36 0.15 0.293 1.24 LSK681M2E~-A3040 680 35 x 40 1.57 0.15 0.293 4.24 LSK681M2E~A3540 820 30 x 50 1.65 0.15 0.243 1.36 LSK821M2E--A3050 4,000 35 * 40 176 0.15 0.199 1.50 LSK102M2E~A3540 318 120 22% 25 0.51 0.15 1.659 0.58 LSK121M2F--A2225 150 22* 30 0.62 0.15 1.327 0.65 LSK151M2F--A2230 180 22* 35 0.72 0.15 1.108 a7 LSK181M2F-A2235 180 25 « 30 0.73 0.15 1.108 on LSK181M2F--A2530 220 22 * 40 0.85 0.15 0.905 0.79 LSK221M2F-A2240 220 25x 35 0.86 0.15 0.905 0.79 LSK221M2F--A2535 220 30 x 25 0.84 0.15 0.905 0.79 LSK221M2F--A3025 270 22% 45 0.99 0.15 0.737 0.87 LSK271M2F--A2245 270 25 * 40 1.01 0.15 0.737 0.87 LSK271M2F-A2540 270 30 x 30 4.00 0.15 0.737 0.87 LSK271M2F--A3030 330 22x 55 4.20 0.15 0.603 0.97 LSK331M2F--A2255 330 25x 45 1.18 0.15 0.603 0.97 LSK331M2F--A2545 330 30 x 35 1.7 0.15 0.603 0.97 LSK331M2F--A3035 330 35 x 25 4.43 0.15 0.603 0.97 LSK331M2F--A3525 300 25 x 50 1.34 0.15 0.510 1.05 LSK391M2F--A2550 390 30 x 40 1.35 0.15 0.510 1.05 LSK391M2F--A3040 390 35 x 30 431 0.15 0.510 1.05 LSK391M2F--A3530 470 30x 45 1.56 0.15 0.423 1.15 LSK471M2F--A3045 470 35 x 35 153 0.15 0.423 1.15 LSK471M2F-A3535 560 30 « 50 178 0.15 0.355 1.26 LSK561M2F--A3050 560 35 x 40 177 0.15 0.355 1.26 LSK561M2F--A3540 680 35 x 45 2.04 0.15 0.293 1.39 LSK681M2F--A3545 820 35 x 50 2.35 0.15 0.243 1.50 LSK821M2F--A3550 360 56 22* 20 0.32 0.15 3.554 0.42 LSK560M2V-A2220 68 22% 25 0.39 0.15 2.927 0.46 LSK680M2V--A2225 82 22% 30 0.49 0.15 2.427 0.51 LSK820M2V--A2230 82 25 * 20 0.44 0.15 2.427 081 LSK820M2V--A2520 400 22% 25 0.45 0.15 1.990 0.56 LSK101M2V=A2225 100 25x 25 0.49 0.15 1.990 0.56 LSK101M2V--A2525 120 22 * 30 0.53 0.15 1.659 061 LSK121M2V-~-A2230 120 25 x 30 0.55 0.15 1.659 061 LSK121M2V-~-A2530 120 30 * 20 0.52 0.15 1.659 061 LSK121M2V--A3020 150 22* 35 0.58 0.15 1.327 0.69 LSK151M2V--A2235 150 25x 25 0.54 0.15 1.327 0.69 LSK151M2V-A2525 150 30x 25 0.63 0.15 1.327 0.69 LSK151M2V--A3025 150 35 x 20 0.64 0.15 1.327 0.69 LSK151M2V-~-A3520 180 22* 40 0.67 0.15 1.108 0.75 LSK181M2V--A2240 180 25 x 30 0.64 0.15 4.106 0.75 LSK181M2V--A2530 220 22% 45 0.78 0.15 0.905 0.83 LSK221M2V--A2245 220 25x 35 0.76 0.15 0.905 0.83 LSK221M2V-A2535 220 30 x 25 0.73 0.15 0.905 0.83 LSK221M2V--A3025 220 35 x 30 0.87 0.15 0.905 0.83 LSK221M2V--A3530 270 22 * 50 0.88 0.15 0.737 0.92 LSK271M2V--A2250 270 25 x 40 0.85 0.15 0.737 0.92 LSK271M2V-A2540 270 30 x 30 0.84 0.15 0.737 0.92 LSK271M2V--A3030 270 35 «25 0.86 0.15 0.737 0.92 LSK271M2V-~-A3525 330 25 x 45 0.99 0.15 0.603 1.02 LSK331M2V--A2545 330 30x 35 0.99 0.15 0.603 1.02 LSK331M2V--A3035 390 30 x 40 1.14 0.15 0.510 1M LSK391M2V--A3040 390 35 x 30 1.11 0.15 0.510 1.11 LSK391M2V-A3530 470 30x 45 1.19 0.15 0.423 4.22 LSK471M2V-A3045 470 35 x 35 1.18 0.15 0.423 1.22 LSK471M2V-A3535 560 30 x 50 1.32 0.15 0.355 1.33 LSK561M2V--A3050 560 35 x 40 4.32 0.15 0.355 1.33 LSK561M2V--A3540 680 35 x 45 1.52 0.15 0.293 1.46 LSK681M2V--A3545 820 35 x 50 175 0.15 0.243 1.50 LSK821M2V-A3550 All product specifications in the catalog are subject to change without notice. (CAT. 2014E1)

il BRC ES Aluminum Electrolytic Capacitors LSK Dimension & Permissible Ripple Current Capacitance Ripple Current ESR uc pene 120H2, 20°C ae 1204, 105° a2 20'¢ | 120H2, 20° 5 minutes Part Number uF Alcs Q mA 400 56 22 x «(25 0.34 0.15 3.554 0.45 LSK560M2G--A2225 68 825 x «20 037 0.15 2.927 0.49 LSK680M2G--A2520 8222 x «35 0.50 0.15 2.427 0.54 LSk820M2G--A2235 82 30 « 20 0.50 0.15 2427 0.54 LSk820M2G--A3020 100 22 = 30 0.51 0.15 1.990 0.60 LSK101M2G--A2230 100-25 * «25 051 0.15 1.990 0.60 LSK101M2G--A2525 100 30 « 25 0.58 0.15 1.990 0.60 LSK101M2G--A3025 120 22 « «35 0.59 0.15 1.659 0.66 Lsk121M2G--A2235 120-25 x 25 0.55 0.15 1,659 0.66 LSk121M2G--A2525 120 35 * 20 0.65 0.15 1.659 0.66 LSK121M2G--A3520 150 22 * 40 0.70 0.15 1.327 0.73 LSK151M2G--A2240 150-25 = 30 0.67 0.15 1.327 0.73 LSK151M2G--A2530 180 22 « 45 0.81 0.15 1.106 0.80 LSK181M2G--A2245 180-25 x 35 078 0.15 1.106 0.80 LSK181M2G--A2535 180 30 x 25 0.76 0.15 1.106 0.80 LSK181M2G--A3025 220 25 = 40 0.91 0.15 0.905 0.89 LSk221M2G--A2540 220 «30 = 30 0.90 0.15 0.905 0.89 LSK221M2G--A3030 270-25 = 45 1.06 0.15 0.737 0.99 LSk271M2G--A2545 270-30 «35 1.06 0.15 0.737 0.99 LSk271M2G--A3035 270-35 x «25 1.02 0.15 0.737 0.99 LSk271M2G--A3525 330-25 = 50 1.23 0.15 0.603 1.09 LSK331M2G--A2550 330 30 = 40 1.24 0.15 0.603 1.09 LSK331M2G--A3040 330-35 «30 1.21 0.15 0.603 1.09 LSK331M2G--A3530 300-30 x «45 1.42 0.15 0.510 1.18 LSk391M2G--A3045 3900-35 x 35 1.40 0.15 0.510 118 LSK391M2G--A3535 470 30 = 50 1.63 0.15 0.423 1.30 LSk471M2G--A3050 470-35 «= «40 1.62 0.15 0.423 1.30 LSk471M2G--A3540 560 35 x «45 1.86 0.15 0.385 1.42 LSK561M2G--A3545 420 39 22% 25 0.25 0.15 5.104 0.38 LSK390M2P--A2225 68 25x 25 0.36 0.15 2.927 0.51 Lsk680M2P--A2525 100 22x 30 0.43 0.15 1,990 0.61 Lsk101M2P--A2230 100 25 25 0.43 0.15 1.990 0.61 LSK101M2P--A2525 120 22 35 0.50 0.15 1.659 0.67 LSk121M2P--A2235 120 35x 25 0.59 0.15 1.659 0.67 LSK121M2P--A3525 150 22 40 0.61 0.15 1.327 075 LSK151M2P--A2240 150 25x 30 0.58 0.15 1.327 0.75 LSK151M2P--A2530 150 30x 25 0.58 0.15 1.327 0.75 LSK151M2P--A3025 180 22% 45 0.70 0.15 1.106 0.82 LSk181M2P--A2245 180 25 35 0.68 0.15 1.106 0.82 LSk181M2P--A2535 180 30x 30 071 0.15 1.106 0.82 LSK181M2P--A3030 220 22 50 0.82 0.15 0,905 0.91 Lsk221M2P--A2250 220 25x 40 0.80 0.15 0.905 0.91 LSk221M2P--A2540 220 30x 35 0.84 0.15 0,905 0.91 LSk221M2P--A3035 220 35x 25 0.78 0.15 0.905 0.91 LSK221M2P--A3525 270 25 45 0.93 0.15 0.737 1.01 LSK271M2P--A2545 270 30 x 40 0.98 0.15 0.737 1.01 Lsk271M2P--A3040 270 35x 30 0.92 0.15 0.737 1.01 LSk271M2P--A3530 330 25 55 1.12 0.15 0.603 41.12 LSK331M2P--A2555 330 30x 45 1.14 0.15 0.603 1.42 LSK331M2P--A3045 330 35 35 1.09 0.15 0.603 1.12 LSK331M2P--A3535 390 30x 50 1.25 0.15 0.510 1.21 LSK391M2P--A3050 390 35 « 40 1.25 0.15 0.510 1.21 LSk391M2P--A3540 470 35x 45 1.44 0.15 0.423 1.33 LSK471M2P--A3545 560 35x 50 1.64 0.15 0.385 1.45 LSK561M2P--A3550 450 39 22% 25 037 0.15 5.104 0.40 Lsk390M2W-A2225, 68 25x 25 0.47 0.15 2.927 0.52 LSk680M2W-A2525 82 22x 30 0.61 0.15 2.427 0.58 Lsk820M2W-A2230 100 22% 45 0.64 0.15 1.990 0.64 LSK101M2W--A2245, 100 25 25 0.67 0.15 1.990 0.64 Lsk101M2W-A2525 100 30x 25 057 0.15 1,990 0.64 LSk101M2W-A3025, 120 22 35 072 0.15 1.659 0.70 LSk121M2W-A2235, 120 25x 30 0.73 0.15 1.659 0.70 Lsk121M2W-A2530 150 25 35 0.87 0.15 1.327 078 LSK151M2W-A2535 150 30x 30 07 0.15 1.327 0.78 Lsk151M2W-A3030 All product specifications in the catalog are subject to change without notice. (CAT. 2014E1)

IWGURGE G5 Aluminum Electrolytic Capacitors : LSK Dimension & Permissible Ripple Current Capacitance Ripple Current ESR uc or na ece 1202, 20° at 20H, 105°C at 12 ogre 120H2, 20° 5 minutes Part Number 7 pF Alrms * Q mA 450 180 22 x 50 0.98 0.15 1.106 0.85 LSK181M2W--A2250 180 25 x 40 1.01 0.15 4.106 0.85 LSK181M2W-A2540 180 30x 30 1.00 0.15 4.108 0.85 LSK181M2W--A3030 220 25* 45 1.07 0.15 0.905 0.94 LSK221M2W-A2545 220 30x 35 1.07 0.15 0.905 0.94 LSK221M2W--A3035 220 35 x 25 1.03, 0.15 0.905 0.94 LSK221M2W--A3525 270 30 40 1.25 0.15 0.737 1.05 LSK271M2W--A3040 270 35* 30 1.30 0.15 0.737 1.05 LSK271M2W--A3530 330 30x 45 1.46 0.15 0.603 1.16 LSK331M2W--A3045 330 35 35 1.44 0.15 0.603, 1.16 LSK331M2W-A3535 390 35x 45 1.69 0.15 0.510 1.26 LSK391M2W--A3645, 470 35 x 50 1.87 0.15 0.423 1.38 LSK471M2W--A3550 500 47 22« 25 0.30 0.15 4.235 0.46 LSK470M2H-A2225 56 22x 30 0.35 0.15 3.554 0.50 LSK560M2H--A2230 56 25 x 25 0.35 0.15 3.554 0.50 LSKS60M2H--A2525 68 22* 30 0.39 0.15 2.927 0.55 LSK680M2H-A2230 68 25 x 30 0.42 0.15 2.927 0.55 LSK680M2H--A2530 82 22x 35 0.46 0.15 2.427 0.61 LSK820M2H-~-A2235 82 25 = 30 0.46 0.15 2.427 0.61 LSK820M2H--A2530 100 22x 40 0.54 0.15 1.990 0.67 LSK101M2H--A2240 100 25 x 35 0.54 0.15 1.990 0.67 LSK101M2H--A2535 120 22* 45 0.62 0.15 1.659 0.73 LSK121M2H~A2245 120 25 = 40 0.63 0.15 1.659 0.73 LSK121M2H-A2540 150 22 x 50 0.73 0.15 1.327 0.82 LSK151M2H-A2250 150 25« 45 0.75 0.15 1.327 0.82 LSK151M2H-A2545 150 30 30 07 0.15 1.327 0.82 LSK151M2H-A3030 180 25« 50 0.86 0.15 4.106 0.90 LSK181M2H--A2550 180 30* 35 0.81 0.15 1.106 0.90 LSK181M2H-A3035 220 25 = 50 0.95 0.15 0.905 0.99 LSK221M2H--A2550 220 30* 45 1.00 0.15 0.905 0.99 LSK221M2H-A3045 220 35 x 30 0.93 0.15 0.905 0.99 LSK221M2H--A3530 270 35 « 35 1.09 0.15 0.737 1.40 LSK271M2H-A3535 330 35 40 1.28 0.15 0.603 1.22 LSK331M2H--A3540 Part Numbering System LSK series 100uF £20% 400V 4.0%0.5mm — 22x30L PP Ree Terminal LSK 101 M 2G -- A 2230 Series name Capacitance Capacitance | Rated voltage Terminal type Terminal length Case size Tomine Sleeve Example: i Example: Example: Example: { Cap._| Symbol] M=#20% | [ WV | Symbol Type | Symbol |“ $DxL | Code | 560 K = 410% 26 2pins| -- 6.341.0 mm 22x30 | 2230 221 450, 2W. 5 pins LS 25x25 | 2525, 47) i 30*40 | 3040 Note: For more details, please refer to “Part Numbering System (Snap-in Type)" on page 13 All product specifications in the catalog are subject to change without notice. (CAT. 20141)

W Mil URGE 5 Aluminum Electrolytic Capacitors LSK Typical Endurance Curves 10 = 120F/400V-25—9%25L — 5 AR 330NF/450V-359%50L FS 2 t) g 5 -10 a Ss 0 4,000 2,000 3,000 4,000 5,000 6,000 7,000 Time(Hours) 1 =m 120F/400V-25—9%25L _ Ar 330NF/450V-35—9%50L B & o1 Fa ——— g 0.01 oO 1,000 2,000 3,000 4,000 5,000 6,000 7,000 Time(Hours) 4,000 — 120)F/400V-259%25L A 330)F/450V-359%50L e g 100 ra S ° — 0 4,000 2,000 3,000 4,000 5,000 6,000 7,000 Time(Hours) Useful Life Chart 3.0 < 15 Lifetime *32 x16 x8 x4 x2 x1 °5 Multiplier 40 50 60 70 80 90 100 110 Ambient Temperature(’C ) 1A: Actual Ripple Current IR: Rated Ripple Current All product specifications in the catalog are subject to change without notice. (CAT. 20141)