LSG101M2G220300 RFE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

FEATURES

  • Has a snap-in terminal which can solder to a PCB directly and need not fixture to save processing time.
  • Suitable for electronic equipment with medium-high voltage circuits.
  • Printed circuit board terminal snap-in type and lug terminal type available. SPECIFICATIONS ALUMINUM ELECTROLYTIC CAPACITORS LSG Series: Snap-in Terminal Type, 105°C SNAP-IN TERMINAL TYPE RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com RoHS ü PART NUMBER EXAMPLE LSG 101 M 2G 220 300 Blank 6.3mm Terminal A = 4mm Terminal Case Size (Diameter X Length)mm Rate Voltage (400V) Capacitance tolerance (±20%) Capacitance (100µF) Series name a a a a a C1CH04 REV 2009.8.3 Item Operating Temperature Range Capacitance Tolerance Leakage Current (at 20°C) Rated Voltage 16 25 35 50 63 100 160 200 250 350 400 450 Low Temperature 16 25 35 50 63 100 160 200 250 350 400 450 Characteristics Impedance 4 3 3 2 2 2 4 4 4 4 8 8 (at 120Hz) Ratio 15 10 8 6 6 5 4 8 10 16 18 20 Load Life Test (after application of the rated voltage at 85°C/105°C, the polarity inverted every 250 hours. The above specification shall be satisfied when the capacitors are restored to 20°C after rated voltage applied for 2000 hrs at 85°C/105°C Shelf Life Test The above specification shall be satisfied when the capacitors are restored to 20°C after exposing them for 500 hrs at 85°C/105°C without voltage applied. Freq.(Hz) Ripple Current & W.V.(V) Ripple Current & Temperature (°C) 55 70 85 105 Temperature Multipliers Multiplier 2.1 1.8 1.5 1.0 Standards -40°C ~ +105°C Capacitance Change Capacitance Change Less than 200% of specifiec value

2000 Hrs

Within ± 20% of initial value Within specified values

1000 Hrs

Within ± 20% of initial value Dissipation Factor Satisfies Characteristic W of JIS C 5141 Dissipation Factor Test Time Less than 200% of specifiec value Within specified values Performance Dissipaton Factor (Tan ) Z(-25°C)/Z(=20°C) Z(-40°C)/Z(=20°C) Rated Voltage 0.15 for D = 35mm I = 0.02CV ( A after 2 minutes) Where, C = rated capacitance in F. V=rated DC working voltage in V. Impedance ratio shall not exceed the vaues given in the table above 60 120 500 1K 10K up Leakage Current Leakage Current Test Time

RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com RoHS ü ALUMINUM ELECTROLYTIC CAPACITORS LSG Series: Snap-in Terminal Type, 105°C µ Ö V.D.C. D 4700 472 22 x 25 1.50 25 x 25 1.80 5600 562 22 x 25 1.72 22 x 35 1.95 25 x 60 1.96 30 x 25 2 35 x 30 2.99 35 x 35 3.67 35 x 40 4.37 35 x 50 4.92 35V (1V) 22 25 30 35 25V (1E) 22 25 30 35 22 25 30 35 16V (1C) 12000 123 22000 223 15000 153 18000 183 F µ Ö V.D.C. D 1200 122 22 x 25 1.19 22 x 40 1.69 25 x 35 1.71 30 x 25 1.68 1500 152 22 x 45 1.94 25 x 40 1.98 30 x 30 1.95 35 x 25 1.98 22 x 30 1.51 25 x 30 1.74 30 x 30 2.24 30 x 35 2.55 30 x 40 2.86 30 x 45 3.22 8200 822 30 x 45 3.60 35 x 35 3.55 35 x 46 3.90 10000 103 30 x 50 4.04 35 x 40 4.03 35 x 50 4.00 12000 123 35 x 45 4.55 472 5600 562 100V (2A) 22 25 30 35 182 2200 222 2700 272 4700 25 30 35F 1800 3300 323 3900 392 25 30 35 50V (1H0) 63V (1J) DIMENSIONS & PERMISSABLE RIPPLE CURRENT Dimension: ÖDxL (mm); Ripple Current: A/RMS at 120Hz, 85°C C1CH04 REV 2009.8.3

RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com RoHS ü ALUMINUM ELECTROLYTIC CAPACITORS LSG Series: Snap-in Terminal Type, 105°C µ Ö V.D.C. D 22 x 25 0.80 22 x 30 0.85 25 x 25 0.85 22 x 25 0.78 22 x 25 0.89 22 x 30 0.82 25 x 25 0.90 30 x 25 1 22 x 35 0.90 25 x 30 1.00 22 x 25 0.86 22 x 30 1.00 22 x 40 1.14 22 x 25 0.87 25 x 25 1.00 22 x 35 1.00 22 x 35 1.30 22 x 40 1.31 22 x 50 1.49 25 x 40 1.49 25 x 30 1.45 30 x 25 1.40 22 x 45 1.53 25 x 35 1.50 25 x 40 1.85 30 x 30 1.76 35 x 25 1.91 30 x 50 1.85 30 x 35 2.02 35 x 30 2.44 30 x 45 2.20 35 x 35 2.20 30 x 40 2.35 30 x 45 35 x 40 2.70 35 x 45 2.58 35 x 50 2.80 1800 182 30 x 50 3.31 35 x 50 3.10 35 x 50 3.47 180 181 220 221 270 271 330 331 390 1000 102 1200 122 391 470 471 820 821 560 561 680 681 F 22 25 30 200V (2D)160V (2C) 3522 25 30 35 1500 152 250V (2E) 22 25 30 35 DIMENSIONS & PERMISSABLE RIPPLE CURRENT Dimension: ÖDxL (mm); Ripple Current: A/RMS at 120Hz, 85°C C1CH04 REV 2009.8.3 µ Ö V.D.C. D 56 560 22 x 25 0.40 22 x 25 0.51 22 x 30 0.51 22 x 30 0.50 25 x 25 0.50 22 x 25 0.50 82 820 22 x 25 0.56 22 x 30 0.58 25 x 25 0.64 22 x 35 0.56 22 x 35 0.67 25 x 30 0.69 22 x 40 0.77 25 x 35 0.78 25 x 50 1.07 30 x 40 1.06 35 x 30 1.08 25 x 50 1.21 30 x 45 1.21 35 x 35 1.12 25 x 40 1.00 30 x 45 1.39 35 x 40 1.25 30 x 45 1.34 30 x 50 1.38 35 x 45 1.70 30 x 40 1.15 35 x 35 1.15 30 x 50 1.55 35 x 45 1.55 30 x 50 1.51 35 x 40 1.47 35 x 50 1.94 30 x 45 1.25 35 x 35 1.25 35 x 45 1.69 35 x 50 1.72 35 x 45 1.94 35 x 40 1.34 35 x 50 2.13 35 x 40 1.90 35 x 50 2.22 35 x 45 1.51 560 561 390 391 470 471 270 271 330 331 180 181 220 221 120 121 150 151 30 35F 350 (2V) 400V (2G) 22 25 30 30 35 400V (2W) 68 680 22 2535 22 25 35 x 35 1.47