LS CRYDOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
- SIP SSR
- Ratings to 12A @ 280 VAC
- SCR output for heavy industrial loads
- DC control
- Zero-crossin g (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage 8A 12A 4-10 VDC LS240D8 LS240D12 20-28 VDC LSE240D8 LSE240D12 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1)
Description
Operating Voltage (47-63Hz) [Vrms] 24-280 24-280 Transient Overvoltage [Vpk] 600 600 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 0.1 0.1 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) 500 500 Maximum Load Current Arms 8 12 Minimum Load Current [Arms] 0.15 0.15 Maximum Surge Current (16.6ms) [Apk] 80 120 Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.6 1.6 Minimum Power Factor (with Maximum Load) 0.5 0.5 For Contact information visit our web site. www.crydom.com ©2008 Crydom, Inc. Specifications subject to change without notice.
INPUT SPECIFICATIONS (1) Control Voltage Range 4-10 VDC 20-28 VDC Minimum Turn On Voltage 4.0 VDC 20 VDC Minimum Turn-Off Voltage 1.0 VDC 1.0 VDC Typical Input Current @ Nominal Voltage 15 mAdc 15 mAdc Nominal Input Impedance 270 Ohm 1500 Ohm Maximum Turn-On Time [msec] 1/2 Cycle 1/2 Cycle Maximum Turn-Off Time [msec] 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 2500 Vrms Minimum Insulation Resistance (@ 500 VDC) 10 9 Ohm Maximum Capacitance, Input/Output 10pF Ambient Operating Temperature Range -30 to 80°C Ambient Storage Temperature Range -30 to 125°C Weight (typical) 0.6 oz. (17g) Encapsulation Therminally Conductive Epoxy GENERAL NOTES 1) All parameters at 25°C unless otherwi se specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) See current derati ng curve. MECHANICAL SPECIFICATIONS PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: + DC CONTROL PIN 4: -DC CONTROL Notes: 1.-Tolerances are ±0.02" (0.5mm) unless otherwise stated. 2.-All pin dimensions are from center of pin UL E116950 CSA LR816889 TUV E2072777 Rev. 071608 THERMAL DERATE INFORMATION For Contact information visit our web site. www.crydom.com ©2008 Crydom, Inc. Specifications subject to change without notice.
For Contact information visit our web site. www.crydom.com ©2008 Crydom, Inc. Specifications subject to change without notice.
ANNEX - ENVIROMENTAL INFORMATION For Contact information visit our web site. www.crydom.com ©2008 Crydom, Inc. Specifications subject to change without notice.