LS240D8 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

  • SIP SSR
  • Ratings up to 12 A @ 280 VAC
  • DC control
  • Zero voltage turn-on (resistive loads) or instantaneous turn-on (inductive loads) output Description LS240D8 LS240D12 Operating Voltage (47-63 Hz) [Vrms] 24-280 24-280 Transient Overvoltage [Vpk] 600 600 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 0.1 0.1 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (B) 500 500 Maximum Load Current [Arms] (C) 8 12 Minimum Load Current [Arms] 0.15 0.15 Maximum Surge Current (16.6 msec) [Apk] 80 120 Maximum On-State Voltage Drop @ Rated Current [Vrms] 1.6 1.6 Thermal Resistance Junction to Case (Rjc) [°C/W] 2.2 2.0 Minimum Power Factor (with Maximum Load) 0.5 0.5 Control Voltage 8 A 12 A 4-10 VDC LS240D8 LS240D12 20-28 VDC LSE240D8 LSE240D12 OUTPUT SPECIFICATIONS (A)

www.sensata.comCopyright © 2024 Sensata Technologies, Inc. Description LS LSE Control Voltage Range 4-10 VDC 20-28 VDC Must Turn-On Voltage 4.0 VDC 20 VDC Must Turn-Off Voltage 1.0 VDC 1.0 VDC Typical Input Current @ Nominal Voltage 15 mA 15 mA Minimum Input Current 7.0 mA 7.0 mA Nominal Input Impedance 270 Ohms 1500 Ohms Nominal Input Impedance Current Regulated Current Regulated Maximum Turn-On Time [msec] 1/2 cycle 1/2 Cycle Maximum Turn-Off Time [msec] 1/2 Cycle 1/2 Cycle Description Parameters Dielectric Strength, Input/Output/Base (50/60 Hz) 2500 Vrms Minimum Insulation Resistance (@ 500 VDC) 109 Ohms Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -30 to 80˚C Ambient Storage Temperature Range -30 to 125˚C Weight (typical) 0.6 oz (17 g) Encapsulation Thermally Conductive Epoxy INPUT SPECIFICATIONS(A) GENERAL SPECIFICATIONS (A) THERMAL DERATE INFORMATION 20 30 40 50 60 70 80 Ambient Temperature (”C) Load Current (Amps)

8 Amp

4ºC/W 8ºC/W 10ºC/W6ºC/W No Heatsink

12 Amp

4ºC/W 8ºC/W 10ºC/W6ºC/W No Heatsink 10 20 30 40 50 60 70 80 Ambient Temperature (”C) Load Current (Amps)

www.sensata.comCopyright © 2024 Sensata Technologies, Inc. MECHANICAL SPECIFICATIONS EQUIVALENT CIRCUIT BLOCK DIAGRAM/WIRING DIAGRAM Tolerances: ±0.02 in / 0.5 mm All dimensions are in inches [millimeters] LS240D12 12A2 40VAC 2+ 3- 4 4-10VDC 1.05 [26.5] 0.90 [22.7] 1.22 [31.0] 0.16 [4.1] 0.45 [11.4] 0.16 [4.0] Ø 0.14 [3.6] 0.11 [2.9±.25] 0.40 [10.2]0.30 [7.6] 0.20 [5.1] 1.40 [35.5] 0.032 ± .005 SQ. [.80 ±.13] (4 Places) .032 [0.8] 0.44 [11.1] 0.15 [3.7] 0.52 [13.1] 0.40 [10.2] LOAD LOAD Load can be used wired in position A or B VAC +VDC VAC -VDC A B Trigger Circuit

Rev:08/04/24 www.sensata.com CONTACT USCopyright © 2024 Sensata Technologies, Inc. Datasheets provided by Sensata Technologies, Inc., its subsidiaries and/or affiliates (“Sensata”) are solely intended to assist third parties (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, valuation, and judgment in designing Buyer’s systems and products. Sensata datasheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular datasheet. Sensata may make corrections, enhancements, improvements, and other changes to its datasheets or components without notice. Buyers are authorized to use Sensata datasheets with the Sensata component(s) identified in each particular datasheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATASHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATASHEETS OR USE OF THE DATASHEETS, EXPRESS, IMPLIED, OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATASHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY , AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. Americas +1 (800) 350 2727 sales.crydom@sensata.com Europe, Middle East & Africa +44 (1202) 416170 ssr-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 ORDERING OPTIONS Example : LSE240D12R 240: 24-280 VAC Control Voltage Operating Voltage Series Control Voltage Rated Load Current LS E 240 D 12 R D: DC Input Blank: 4-10 VDC E: 20-28 VDC LS 8: 8 Amps 12: 12 Amps Switching Mode Blank: Zero voltage turn-on R: Instantaneous turn-on Designed in accordance with the requirements of IEC 62314 AGENCY APPROVALS & CERTIFICATIONS GENERAL NOTES (1) All parameters at 25 °C unless otherwise specified (2) Off-State dv/dt test method per EIA/NARM standard RS-443. paragraph 13.11.1 (3) See current derating curve E116950 (Only for LS240D12(R) models) Required for valid part number For options only and not required for valid part number