LS2101M2G220300 RFE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

ALUMINUM ELECTROLYTIC CAPACITORS LS2 Series: Snap-In, Fail Safe, 85°C

FEATURES

2009.8.3

  • Snap-in, 2000 Hrs, 85°C
  • Fail-Safe, will fail open without flame if excessive voltage is applied
  • RoHS Compliant RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com ° ° Items Operating Temperature Range Capacitance Tolerance Leakage Current (at 20 C) Rated Voltage 200 250 400 450 Tan (max) 0.15 0.15 0.20 0.20 200 250 400 450 4 4 8 8 8 10 18 20 W. V. (V) Temperature ( C) 40 60 70 Multiplier 1.8 1.4 1.2 Other Standards Safety Fundtion Test Conditions 1. DC reverse voltage test: The capacitor is shall be connected in reverse polarity, and applied under specified working voltage. JIS C 5101-4 Leakage Current 1.0 2. DC over voltage test: The rated voltage of 1.2 times shall be applied to the capacitor. I = 0.02CV or1.5 mA whichever is smaller (after 5 minutes) Where, C= rated capacitance in F. V= rated DC working voltage in V. Impedance ratio shall not exceed the values given in the table below. * The above specifications shall be satisfied when the capacitors are restored to 20 C after the rated voltage applied for 2,000 hrs at 85 C Z(-40 C)/Z(+20 C) Z (-25 C)/Z(+20 C)Impedance Ratio Rated Voltage Performance -40 C ~ +85 C +20% (at 120Hz, 20 C) Dissipation Factor (Tan at 120Hz, 20 C) Low Temperature Characteristics (at 120Hz) Load Life Test Freq. (Hz) Test Time Capacitance Change * The above specifications shall be satisfied when the capacitors are restored to 20 C after exposing them for 1,000 hrs at 85 C without voltage applied. The rated voltage shall be applied to the capacitors before the measurements (Refer to JIS C 5102) Dissipation Factor Test Time Leakage Current Capacitance Change 1,000 Hrs Within +20% of initial value 120 300 1K Shelf Life Test 10K up 85Ripple Current & Temperature Multipliers Ripple Current & Frequency Multipliers Dissipation Factor Less than 150% of specified value Within specified value 2,000 Hrs Within +20% of initial value Less than 200% of specified value Within specified value RoHS ü 6.3+1L+2 Max PART NUMBER EXAMPLE LS2 101 M 2G 220 300 Case Size (22mm X 30mm) Rated Voltage (400V) Capacitance tolerance (±20%) Capacitance (100mF) Series name Terminal Lengh: Blank = 6.3mm A = 4.0mm

RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com WV D 22 x 25 1.01 22 x 25 1.15 22 x 30 1.27 25 x 25 1.24 22 x 25 1.30 22 x 35 1.52 25 x 25 1.49 30 x 40 3.44 35 x 35 3.40 35 x 40 3.56 30 x 50 3.93 35 x 40 3.87 35 x 50 4.26 35 x 45 4.37 WV D 22 x 25 0.62 22 x 30 0.80 25 x 25 0.77 22 x 25 0.80 22 x 30 0.87 25 x 25 0.85 30 x 40 1.97 385 x 30 1.95 30 x 45 2.10 35 x 35 2.06 30 x 45 2.22 35 x 35 2.17 30 x 50 2.24 35 x 45 2.34 30 x 50 2.40 35 x 40 2.42 35 x 50 2.63 35 x 45 2.71 Cap. 100 25 30 35 180 220 270 330 470 560 680 820 1,000 1,200 1,500 1,800 200V (2D) 250V (2E) 22 25 30 35 22 25 30 35 Cap. 400V (2G) 450V (2W) 22 25 30 35 22 120 150 180 220 560 270 330 390 470 ALUMINUM ELECTROLYTIC CAPACITORS LS2 Series: Snap-In Lug and Terminal Types, 85C DIMENSIONS & PERMISSABLE RIPPLE CURRENT Dimension: ÖDxL (mm); Ripple Current: A/RMS at 120Hz, 85°C C1CH03 2009.8.3