LS2

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Features

+ Snap-in terminal type + 85°C, 2,000 hours assured + Good safe characteristics which shall be failed with open mode without sparking and catching fire, when it is applied excess voltage + RoHS Compliance ‘Sleeve & Marking Color: Black & White Specifications [tems Performance: ‘Category Temperature Range 200 ~ 400V 450V 220% (at 120Hz, 20°C) 1=3JeP or 1.5 mA whichever is smaller (after 5 minutes) Ker eye (CES) Where, C = rated capacitance in FV = rated DC working voltage in V Rated Voltage 200 250 400 450 Impedance ratio shall not exceed the values given in the table below. Low Temperature Rated Voltage zoo | 250 | 400 | a5 ‘Characteristics (at 120Hz) Impedance — 2(-25C/2(+20C) | 4 4 Ratio | Z(-40C)/Z+20°C) 8 10 Test Time 2,000 Hrs Capacitance Change Within +20% of initial value Tand | Less than 200% of specified value Leakage Current il Within specified value * The above Specifications shall be satisfied when the capacitors are restored to 20°C after the rated voltage applied with rated ripple current for 2,000 hours at 85°C. Test Time 1,000 Hrs Capacitance Change | Within #20% of initial value Shelf Life Test Tand Less than 150% of specified value Leakage Current Within specified value * The above Specifications shall be satisfied when the capacitors are restored to 20°C after exposing them for 1,000 hours at 85°C without voltage applied. The rated voltage shall be applied to the capacitors before the measurements (Refer to JIS C 5101-4 4.1). Ripple Current & Frequency Frequency (Hz) 50/60 | 100/120] 300 | 1k 10k up Multipliers: Multiplier 08 1.0 441 1.3 14 ‘Safety Function Test 1. DC reverse voltage test: The capacitor is shall be connected in reverse polarity, and applied under specified working voltage. Conditions 2. DC over voltage test: The voltage of 1.2 times shall be applied to the capacitor. Failure percentage = 3 % (During useful life) Failure rate S 70 fit (70 10°/h Diagram of Dimensions Unit: mm Sleeve 4.0405 ae 2 2t01 Vent | 1 9 <0, nq x x 8 S| ' <0 L L+2 Max J y PC board pin-out All product specifications in the catalog are subject to change without notice. (CAT. 2014£1)

RURGE\\ Ill ih EZED Aluminum Electrolytic Capacitors LS2 Dimension & Permissible Ripple Current Capacitance el Ripple Current ESR uc Working Voltage +20H2, 20° @DsL—AQOHZ, 85°C got ag¢q 120Hz, 20°C S minutes Part Number : BF mm Alrms " Q mA 200 560 35 x 20 2.08 0.15 0.355 1.00 LS2561M2D--A3520 680 35 x 20 2.23 0.15 0.293, 1.11 LS2681M2D--A3520 680 35x 25 2.30 0.15 0.293 1.11 LS2681M2D--A3525 820 35 x 25 253 0.15 0.243, 1.21 LS2821M2D--A3525 1,000 35 x 30 2.96 0.15 0.199 1.34 LS2102M2D--A3530 1,200 35x 35 3.40 0.15 0.166 147 LS2122M2D--A3535 1,500 35 x 40 3.87 0.15 0.133, 1.50 LS2152M2D--A3540 1,800 35x 45 437 0.15 0.111 1.50 LS2182M2D--A3545 250 390 35x 20 1.68 0.15 0.510 0.94 LS2391M2E~-A3520 470 35 x 20 1.85 0.15 0.423, 1.03 LS2471M2E--A3520 470 35x 25 2.01 0.15 0.423, 1.03 LS2471M2E--A3525 560 35x 25 2.21 0.15 0.355 1.12 LS2561M2E--A3525 680 35 x 30 2.54 0.15 0.293 1.24 LS2681M2E--A3530 820 35 x 35 29 0.15 0.243 1.36 LS2821M2E~-A3535 1,000 35 x 35 3.21 0.15 0.199 1.50 LS2102M2E--A3535 1,200 35x 40 3.56 0.15 0.166 1.50 LS2122M2E--A3540 1,500 35 x 50 4.26 0.15 0.133, 1.50 LS2152M2E~-A3550 400 220 35 x 25 1.60 0.20 1.206 0.89 1$2221M2G--A3525 270 35 x 30 1.75 0.20 0.983 0.99 LS2271M2G--A3530 330 35 x 30 1.95 0.20 0.804 1.09 LS2331M2G--A3530 390 35x 35 247 0.20 0.680 1.18 LS2391M2G--A3535 470 35 40 2.42 0.20 0.565 1.30 1S2471M2G--A3540 560 35x 45 271 0.20 0.474 1.42 LS2561M2G--A3545 450 120 35 x 20 11 0.20 2212 0.70 LS2121M2W--A3520 150 35 x 20 1.24 0.20 1.769 0.78 LS2151M2W--A3520 150 35x 25 1.35 0.20 1.769 0.78 LS2151M2W--A3525 180 35x 25 1.39 0.20 1.474 0.85 LS2181M2W--A3525 220 35 x 30 1.61 0.20 1.206 0.94 LS2221M2W--A3530 270 35x 35 1.86 0.20 0.983 1.05 LS2271M2W--A3535 330 35 x 35 2.06 0.20 0.604 1.16 LS2331M2W--A3535 390 35 x 45 2.34 0.20 0.680 1.26 LS2391M2W--A3545 470 35x 50 2.63 0.20 0.565 1.38 LS2471M2W--A3550 Part Numbering System LS2series 2200F —-+20% 400v 4.040.5mm 35x25, PP Res Terminal Ls2 221 M 2G -- A 3525 Capacitance Terminal and Sleeve Seriesname Capacitance | Canacitance | Rated voltage Terminal type Terminal length Case size ype Example: Example: Example: Example: [Cap | Symbol | M=+20% | | wv | Symbol Type | Symbol || *": oDxL | Code 56 560 | K=+10% 400 | 2G | | | 2pins | -- 6.341.0mm | | 22x30 | 2230 | | (220 [221 450_|_2W Bets pins | 15 [2525 | 2525 470_| 474 [30x40 | 3040_| Note: For more details, please refer to “Part Numbering System (Snap-in Type)" on page 13. Al product specifications in the catalog are subject to change without notice. (CAT. 2014E1)

wi Evr) Aluminum Electrolytic Capacitors LS2 Typical Endurance Curves 40 —® 220pF/ 200V-22—p*25L = 5 A 330YF/ 400V-30~x40L rs 2 0 8 5 = -0 fo & 45 Lo} -20 C) 500 1,000 1,500 2,000 2,500 3,000 3,500 Time(Hours) — 220uF/ 200V-229x25L 1 —e— 150uF/ 450V-259*35L iy AR 330yF/ 400V-30p%40L é g © 04 rs] o ra a 0.01 oO 500 1,000 1,500 2,000 2,500 3,000 3,500 Time(Hours) 1,000 = 220F/ 200V-22—p%25L —— 150F/ 450V-25p*35L ~ A 330UF/ 400V-309*40L S é 100 > =). a g ro /?/ "E"E 0 500 1,000 1,500 2,000 2,500 3,000 3,500 Time(Hours) Useful Life Chart 2.0 g 10 Lifetime *1 x8 x4 x2 1 © | Multiplier

0.0 SN ——

Ambient Temperature(‘C) 1A: Actual ripple current —_IR: Rated ripple current All product specifications in the catalog are subject to change without notice. (CAT. 2014E1)