LS1001-7R POWER-ONE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

1www.power-one.com Edition 4/04.2001

  • Rugged electrical and mechanical design
  • Wide input frequency range from 47...440 Hz
  • Operating ambient temperature range –40...71°C with convection cooling S Series 100 Watt AC-DC Converters Input voltage range from 85…264 V AC 1 or 2 isolated outputs up to 48 V DC 4 kV AC I/O electric strength test voltage Selection chart Output 1 Output 2 Input voltage Type Options U o nom Io nom U o nom Io nom U i [V DC] [A] [V DC] [A] [V AC] 12 4 12 4 85...264 LS 2320-7R -9, E, D, P, T, B1 24 2 24 2 85...264 LS 2660-7R -9, E, D, P, T, B1 LGA

2www.power-one.com Edition 4/04.2001 Cassette Style S Series Input Input voltage AC wide input range 85...264 V AC Input frequency 47...440 Hz Input voltage DC 88...372 V DC Inrush current limitation by thermistor Output Efficiency U i nom, Io nom up to 85% Output voltage setting accuracyU i nom, Io nom ±0.6% U o nom Output voltage switching noise IEC/EN 61204, total typ. 90 mV pp Minimum load not required 0 A Current limitation rectangular U/I characteristic typ. 110% Io nom Operation in parallel by current limitation Hold-up time U i nom, Io nom 80 ms Control and protection Input fuse not user accessible 4 AT Input undervoltage lockout typ. 90% U i min Input overvoltage lockout typ. 109% U i max Input transient protection varistor Output no-load, overload and short circuit proof Output overvoltage suppressor diode in each output typ. 130% U o nom Overtemperature switch-off with auto restart TC typ. 100°C Output voltage adjustment 0...110% U o nom Inhibit TTL input, output(s) disabled if open circuit Status indication LEDs: OK, inhibit, overload Safety Approvals EN 60950, UL 1950, CSA 22.2 No. 950 Class of equipment class I Protection degree IP 30 Electric strength test voltage I/case 2 kV AC I/O 4 kV AC O/case 1 kV AC O/O 0.1 kV AC EMC Electrostatic discharge IEC/EN 61000-4-2, level 4 (8/15 kV) criterion A Electromagnetic field IEC/EN 61000-4-3, level x (20 V/m) criterion A Electr. fast transients/bursts IEC/EN 61000-4-4, level 4 (2/4 kV) criterion A Surge IEC/EN 61000-4-5, level 3 (2 kV) criterion A Conducted disturbances IEC/EN 61000-4-6, level 3 (10 V) criterion A Electromagnetic emissions CISPR 22/EN 55022 class B

3www.power-one.com Edition 4/04.2001 S Series 100 Watt AC-DC Converters Environmental Operating ambient temperatureU i nom, Io nom, convection cooled –25...71°C Operating case temperature TC U i nom, Io nom –25...95°C Storage temperature non operational –40...100°C Damp heat IEC/EN 60068-2-3, 93%, 40 °C 56 days Shock IEC/EN 60068-2-27, 6 ms 100 g n Bump IEC/EN 60068-2-29, 6 ms 40 g n Random vibration IEC/EN 60068-2-64, 20...500 Hz 4.9 g n rms MTBF MIL-HDBK-217F, G B, 40°C 500'000 h Options Extended temperature range –40...71°C, ambient, operating -9 Electronic inrush current limitation E Output voltage adjustment 40...110% U o nom, excludes feature R and vice versa P Input and/or output undervoltage monitoring, excludes option V D0 … D9 Input and/or output undervoltage monitoring (VME), excludes option D V0, V2, V3 Current sharing T Cooling plate B1 Pin allocation Pin LS 4000 LS 5000

4 Vo1+ Output 1 Vo2+ Output 2

6 Vo1+ Vo2+

8 Vo1 – Output 1 Vo2 – Output 2

10 Vo1 – Vo2–

12 S+ Sense Vo1+ Output 1

14 S – Sense Vo1 –

16 R Control of

20 D Save data D Save data

22 T Current sharing T Current sharing

24 Protective earth Protective earth

26 N Neutral N Neutral

28 N N

30 P Phase P Phase

32 P P

4www.power-one.com Edition 4/04.2001 Cassette Style S Series Mechanical data Tolerances ±0.3 mm (0.012") unless otherwise indicated. European Projection 111 (3U) 4.37") 168.5 (6.63") Measuring point of case temperature TC 60 (2.36")

7 TE 5 TE

Option P (Uo) Option D (Uti) LED OK LED i LED IoL Option D (Uto) 25.9 (1.02") 11.8 (0.46") 152 (5.98") 100 (3.93") 09004 Accessories Front panels 19" (Schroff/Intermas) Mating H15 connectors with screw, solder, fast-on or press-fit terminals Connector retention facilities and code key system for connector coding Chassis or wall mounting plates for frontal access Universal mounting brackets for chassis or DIN-rail mounting