LS05-26B03SS MORNSUN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

(-F) Series 201 A/0 Page of M ORNSUN Guangzhou Science Technology Co., Ltd. reserves the copyright and right of final interpretation AC/DC converter RoHS

FEATURES

e 528VAC/100 745VDC AC and DC dual-use(input from the same terminal) Working well with any two phases Operating temperature range: -40 to +85 Compact size, high power density Isolation voltage: KV A C Used in such as electrical, instrumentation industries Output short circuit, over-current protection Meets IEC62368, UL62368, EN 62368 standard CE P ending) LS05-26B xxSS (-F) s eries ---- a compact size power converter offered by Mornsun. It u ltra wide input voltage, taking both DC and AC input voltage, low power consumption, high efficiency, high reliability, safer isolation. Meets IEC62368, UL62368, EN 62368 standard. Widely used in industrial control and instrumentation, such as electric power for demanding volume, the requirement of wide input voltage range, the need to meet CE certification and EMC less demanding

applications

environment. Selection Guide Certification Part No. Output Power N ominal Output Voltage and Current o o Efficiency (230VAC, %/Typ.) Max. Capacitive Load µ CE Pending LS05-26B03SS(-F) 2.805W 3.3V/850mA 2200 LS05-26B05SS(-F) 4.250W 5V/850mA 1500 LS05-26B09SS(-F) 5.000W 9V/560mA 680 LS05-26B12SS(-F) 12V/420mA 470 LS05-26B15SS(-F) 15V/340mA 330 LS05-26B24SS(-F) 24V/210mA 100 Note: *The model of degrees of corner is with For example the LS05-26B 03SS of degrees of corner product is LS05-26B 03SS-F . Input Specifications Item Operating Conditions Min. Typ. Max. Unit Input Voltage Range AC input 528 VAC DC input 100 745 VDC Input Frequency Hz Input Current 115VAC A 230VAC 480 VAC 0.0 Inrush Current 115VAC 230VAC 480 VAC Leakage current 0.25mA RMS typ. 230VAC/50Hz Recommended External Input Fuse .0A /500VAC slow fusing, necessary Hot Plug Unavailable Output Specifications Item Operating Conditions Min. Typ. Max. Unit Output Voltage Accuracy LS05-26B03SS(-F) Others Line Regulation Full load LS05-26B03SS(-F) 2.5 Others 1.5 Load Regulation 10%-100% load 2.5 Ripple Noise* 20MHz bandwidth (peak-peak value) 180 mV

(-F) Series 201 A/0 Page of M ORNSUN Guangzhou Science Technology Co., Ltd. reserves the copyright and right of final interpretation Temperature Coefficient 0.15 Stand-by Power Consumption 230VAC Input W 480VAC Input 0.5 Short Circuit Protection Hiccup, continuous, self-recovery Over-current Protection 00%Io self-recovery Min. Load Hold-up Time 230VAC input ms 400 VAC input 100 Note: *Parallel line test method is adopted to test the ripple and noise,please see AC-DC Converter Application Notes for specific operation methods. General Specifications Item Operating Conditions Min. Typ. Max. Unit Isolation Voltage Input-output Test time: 1min 4000 VAC Operating Temperature W ork in the power drop curve range -40 +85 Storage Temperature -40 +105 Storage Humidity %RH Welding Temperature Wave-soldering 260 time:5 10s Manual-welding 360 time:3 Switching Frequency kHz Power Derating 165VAC input -40 to -20 3.0 +55 to +85 2.0 165 528VAC input -40 to -20 0.0 +55 to +85 2.0 110VAC 2.0 %/VAC 480 528VAC 0.42 Safety Standard IEC62368/UL62368/ EN 62368 Safety Certification IEC62368/UL62368/ EN 62368 CE Pending) Safety Class CLASS MTBF MIL-HDBK-217F@25 300,000 h Physical Specifications Dimension 44.50*13.00*2 4.00 mm Weight 7.5 g(Typ.) Cooling Method Free air convection

(-F) Series 201 A/0 Page of M ORNSUN Guangzhou Science Technology Co., Ltd. reserves the copyright and right of final interpretation EMC Specifications EMI CE CISPR 2/EN550 CLASS A (See Fig. for typical application circuit) CISPR 2/EN550 CLASS B See Fig. for recommended circuit RE CISPR 2/EN550 CLASS A (See Fig. for typical application circuit) CISPR 2/EN550 CLASS B See Fig. for recommended circuit) EMS ESD IEC/EN 61000-4-2 Contact 4KV Perf. Criteria B RS IEC/EN61000-4-3 10V/m See Fig. for recommended circuit perf. Criteria A EFT IEC/EN 61000-4-4 2KV (See Fig. for typical application circuit) perf. Criteria B IEC/EN 61000-4-4 4KV See Fig. for recommended circuit perf. Criteria B Surge IEC/EN 61000-4-5 line to line 1KV (See Fig. for typical application circuit) perf. Criteria B IEC/EN 61000-4-5 line to line 2KV/ line to ground 4KV See Fig. for recommended circuit perf. Criteria B CS IEC/EN61000-4-6 3Vr.m.s See Fig. for recommended circuit perf. Criteria A Voltage dips, short interruptions and voltage variations immunity IEC/EN61000-4-11 70% See Fig. for recommended circuit perf. Criteria B Product Characteristic Curve -40 -20 55 70 85 100 Temperature Derating Cur ve Output Power Percentage(%) Ambient Temp erature( ) Input Volta ge 90 - 165VAC 100 - 230VDC -40 100 Temperature Derating Curve Ambient Temperature( ) Output Power Percentage(%) Input voltage:165 - 528VAC 230 - 745VDC 110 480 528 100 Input Voltage Ambient temperature:25 Input Voltage Derating Curve Output Power Percentage(%) VAC 155 675 100 745 VDC Note: When input 110VAC/480 528VAC/100 155VDC/675 745VDC, it need to be voltage derated on basis of temperature derating; P lease refer to typical application circuit This prod uct is suitable for use in natural air cooling environments, if in a closed environment, please contact our company s FAE.

(-F) Series 201 A/0 Page of M ORNSUN Guangzhou Science Technology Co., Ltd. reserves the copyright and right of final interpretation Design Reference Typical application circuit Fig. Note: is Pi filter circuit Part No. MOV C6/C7 necessa ry necess ary R1/R2 nece ssary nec essar y necessary nec essar y necess ary CY1 necessa ry FUSE neces sary nece ssary TVS LS05-26B 03SS (-F) S14K 625 µ 450V 1.2 m H Ω µ F/16V Solid Capacitor 4.7 µ H 470 µ 35V 0.1 µ F /50V 470pF/ 500VAC 2.0 A 00VA slow fusing, neces sary Ω /1W SMBJ7.0A LS05-26B 05SS (-F) SMBJ7.0A LS05-26B 09SS (-F) SMBJ12A LS05-26B 12SS (-F) µ F/16V Solid Capacitor 220 µ V SMBJ20A LS05-26B 15SS (-F) 0.068 µ F /630V µ F 25V 1000 µ V 330 µ 35V SMBJ20A LS05-26B 24SS (-F) µ 470 µ 35V SMBJ30A Note: C1/C2: filtering electrolytic capacitor (which is required), recommended the same brand, the same model, thesame batch of electrolytic capacitors R1/R2: m ax o peration v oltage of R1/R2 should be above 450V. While using chip resistors, it is recommended to use several chip resistors in series to meet o peration v oltage R3(which is required) w inding resistance are output filer capacitors (which is required), they are recommended to be high frequency and low impedance electrolytic capacitors. Capacitance and rated ripple current of capacitors refer to the datasheets provided by the manufactures. Capacitor voltage reduced to at least 80% C6, C7, are a ceramic capacitor, which is used to filter high frequency noise. C3, and form a pi-type filter circuit. Current of andL2 refer to the datasheets provided by the manufactures, current derating to at least 80% TVS is a recommended component to protect post-circuits( I f converter fails) EMC solution-recommended circuit Fig. Element model Recommended value MOV S14K 625 CY CY 470pF/500VAC CX 0.1 µ F/530VAC LCM 4.5mH 330u H Ω /1W FUSE 2.0 A /500VAC, slow fusing, necessary Note: The recommended value of other components refers to typical application circuit. For more information Please find the application note on www.mornsun-power.com

(-F) Series 201 A/0 Page of M ORNSUN Guangzhou Science Technology Co., Ltd. reserves the copyright and right of final interpretation LS05-26BxxSS Dimensions and Recommended Layout LS05-26BxxSS Dimensions and Recommended Layout

(-F) Series 201 A/0 Page of M ORNSUN Guangzhou Science Technology Co., Ltd. reserves the copyright and right of final interpretation Notes: Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com LS05-26BxxSS p acking bag number: 58220032; LS05-26BxxSS-F p acking bag number: 58220026; If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all parameters in the datasheet; This part is open frame, at least 10mm safety distance between the primary and secondary external components of the module is needed to meet the safety requirement Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25 humidity<75% with nominal input voltage and rated output load; In order to increase the conversion efficiency of the product with light load in the design, the product will have audio noise when it is operating, but don t affect the product's reliability and performance; Module required dispensing fixed after assembled; All index testing methods in this datasheet are based on our Company s corporate standards; We can provide product customization service, please contact our technicians directly for specific information; Products are related to laws and regulations: see "Features" and "EMC"; 10. Our products shall be classified according to ISO14001 and related environmental laws and regulations, and shall be handled by qualified units. MORNSUN Guangzhou Science Technology Co., Ltd. Address: No. Kehui St. Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, China Tel: 86-20-38601850-8801 Fax: 86-20-38601272 E-mail: info@mornsun.cn