SSA-EB BANNER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
- Push-to-stop, twist-to-release operation
- Rugged, modular design; easy assembly and installation
- Kits available for easy selection
- Choice of metal base with or without enclosure; all kits include disc label with “Emergency Stop” legend
- Choice of normally closed (safety) or combination normally closed/normally open (non safety) contacts
- Latching design complies with ISO 13850; direct (positive) opening operation per IEC 60947-5-1 WARNING: Not a Safeguarding Device An Emergency Stop Device is not considered a safeguarding device because it requires an overt action by an individual to stop machine motion or hazards. A safeguarding device limits or eliminates an individual's exposure to a hazard without action by the individual or others. Because an individual must actuate the device for it to function, these devices do not fit the definition of a safeguarding device and cannot be substituted for required safeguarding. Refer to the relevant standards to determine those requirements. Models Models Contacts Enclosure Included SSA-EBM-02L 2 normally closed No SSA-EBM-11L 1 normally closed and 1 normally open SSA-EBM-12L 2 normally closed and 1 normally open SSA-EBM-02E 2 normally closed Yes SSA-EBM-11E 1 normally closed and 1 normally open SSA-EBM-12E 2 normally closed and 1 normally open Important -- Read This First! The user is responsible for satisfying all local, state, and national laws, rules, codes, and regulations relating to the use of this product and its application. Banner Engineering Corp. has made every effort to provide complete application, installation, operation, and maintenance instructions. Please contact a Banner Applications Engineer with any questions regarding this product. The user is responsible for making sure that all machine operators, maintenance personnel, electricians, and supervisors are thoroughly familiar with and understand all instructions regarding the installation, maintenance, and use of this product, and with the machinery it controls. The user and any personnel involved with the installation and use of this product must be thoroughly familiar with all applicable standards, some of which are listed within the specifications. Banner Engineering Corp. makes no claim regarding a specific recommendation of any organization, the accuracy or effectiveness of any information provided, or the appropriateness of the provided information for a specific application. SSA-EB Series Emergency Stop Buttons Original Document 111880 Rev. B
28 September 2018
enclosure housing, to provide emergency stop actuation. When the button is armed, the switch’s normally closed contacts are closed and its normally open contacts, if present, are open. in this condition until the push button is manually rearmed. To manually rearm, twist the push button. These emergency stop buttons are not safeguarding devices. They do not automatically protect personnel from injury.
- Latch the push button onto the mounting adapter by rotating it.
- Attach the mounting adapter to the mounting surface using the
- Mount the E-Stop button on a rigid surface that is easily accessible
standards for recommendations on number and placement. mounting via removable rubber plug or knockout. Figure 1. Assembly At machine set up, a Designated Person1 should test each emergency stop push button for proper machine shutdown response. conditions) have been exceeded. the emergency stop device, or replacing any component of the device. installation (reference ANSI B30.2).
- 22.5 mm metal button (mounting adapter sold separately)
- Twist to release, mechanical latching ISO 13850 (EN 418) compliant
- Diameter 40 mm (without mounting adapter). 8-LM2T-C01
- Normally closed (N.C.) positively driven contact element
- Direct (positive) opening operation per IEC/EN 60947-5-1 8-LM2T-AU120 Metal mounting adapter for metal button 8-LM2T-C10 Normally open (N.O.) auxiliary contact element LPZP1A5
- Compact size - 70mm x 70mm x 56mm
- One 22mm hole (with key way) for installation of emergency stop palm/push button
- Maximum of three contact blocks
- Polycarbonate construction
- Wire entry via three sides (M16, M20 or M25) or the bottom (M16)
- Environmental rating: IP66, IP67 and IP69K (with proper installation and rated button)
- Mounting hole location (x4) - 45mm x 58mm 8-LM2T-AU115
- 60 mm diameter
- Non-adhesive plastic legend with “Emergency Stop” inscription Specifications Emergency Stop Push Button Mechanical Life 300,000 operations Operating Force 0.8 kg Environmental rating IEC IP65; NEMA 4/13 Operating Temperature Mounting Adapter The adapter is fixed to the mounting surface using incorporated screws (Tmax = 0.8 Nm) Construction Plastic parts: Polyamide and polycarbonate Metal parts: Aluminum and zinc alloy Certifications Compliant with EN/IEC 60497-1; -5-1 SSA-EB Series Emergency Stop Buttons P/N 111880 Rev. B www.bannerengineering.com - Tel: +1-763-544-3164 3