DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

Shielded Power Inductors High Inductance Document 1244-1 Document 1244-1 Revised 01/05/15 Inductance2 DCR max3 SRF typ4 Isat (A)5 Irms (A)6 Part number1 ±20% (µH) (Ohms) (MHz) 10% drop 20% drop 30% drop 20°C rise 40°C rise 1. When ordering, please specify termination and packaging codes: LPZ3008-334MRC Termination: R = RoHS compliant matte tin over nickel over silver. Special order, added cost: Q = RoHS tin-silver-copper (95.5/4/0.5) or P = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked

  • High inductance values (220 – 4700 µH) not available in the corresponding LPS series of parts
  • Rugged construction improves pick and place operation Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant matte tin over nickel over silver. Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 8753ES or equivalent. 5. DC current that causes the specified inductance drop from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering.

Document 1244-2 Revised 01/05/15 L vs Current L vs Frequency -40 -20 02 04 06 08 0 100 140120 Ambient temperature (°C) 120 110 100 25°C Pe rcent of rated Current Isat Irms Current Derating Dimensions are in inches mm 0.01 0.1 101 Frequency (MHz) Inductance (µH) 330 µH 220 µH 100 200 300 400 500 600 700 800 1000 0.0001 0.001 0.100.01 Current (A) Inductance (µH) 330 µH 220 µH 100 200 300 400 500 600 700 800 1000 Weight 22 – 25 mg Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth Recommended pick and place nozzle OD: 3 mm; ID: ≤ 1.5 mm Shielded Power Inductors – LPZ3008

-40 -20 02 04 06 08 0 100 140120 Ambient temperature (°C) 120 110 100 25°C Pe rcent of rated Current Isat Irms Typical Current Derating Dimensions are in inches mm L vs Frequency 0.01 0.1 101 Frequency (MHz) Inductance (µH) 330 µH 100 200 300 400 500 600 700 800 1000 L vs Current 0.0001 0.001 0.100.01 Current (A) Inductance (µH) 330 µH 100 200 300 400 500 600 700 800 1000 Document 1244-3 Document 1244-3 Revised 01/05/15 Shielded Power Inductors – LPZ3010 Weight 25 – 32 mg Packaging 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.4 mm pocket depth Recommended pick and place nozzle OD: 3 mm; ID: ≤ 1.5 mm

Shielded Power Inductor – LPZ3015 -40 -20 02 04 06 08 0 100 140120 Ambient temperature (°C) Pe rcent of rated c urrent 120 110 100 Isat Irms 25° C Current Derating Dimensions are in inches mm L vs Current 0.001 0.01 1.00.1 Current (A) Inductance (µH) 330 µH 100 200 300 400 500 600 700 800 1000 L vs Frequency Weight 40 – 45 mg Packaging 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide, 0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth Recommended pick and place nozzle OD: 3 mm; ID: ≤ 1.5 mm Document 1244-4 Document 1244-4 Revised 01/05/15

Document 1244-5 Revised 01/05/15 Shielded Power Inductors – LPZ3314 Typical L vs Current Typical L vs Frequency Current Derating -40 -20 02 04 06 08 0 100 140120 Ambient temperature (°C) Pe rcent of rated c urrent 120 110 100 Isat Irms 25° C Dimensions are in inches mm Weight 44.1 – 46.5 mg Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.52 mm pocket depth Recommended pick and place nozzle OD: 3.3 mm; ID: ≤ 1.65 mm

Document 1244-6 Revised 01/05/15 Shielded Power Inductors – LPZ4012 Typical L vs Current Typical L vs Frequency Current Derating -40 -20 02 04 06 08 0 100 140120 Ambient temperature (°C) Pe rcent of rated c urrent 120 110 100 Isat Irms 25° C 0.1535 ±0.003 3,90 ±0,076 0.1535 ±0.003 3,90 ±0,076 0.0433 ±0.004 1,10 ±0,10 0.060 1,52 Winding direction 0.173 4,40 0.129 3,28 Recommended Land Pattern 0.059 1,50 0.105 2,66 0.153 3,89 0.0305 0,7750.045 1,15 0.110 2,79 Dash number Internal code XXXX Dimensionsare of the case not including the termination.For maximumoverall dimensionsincludingthe termination,add 0.005 in/0,13 mm. For optionaltin-leadand tin-silver-copper terminations,dimensionsare for the mountedpart. Dimensionsbefore mounting can be an additional0.005 inch/0,13 mm). Dimensions are in inches mm Weight 54 – 64 mg Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.25 mm thick, 8 mm pocket spacing, 1.32 mm pocket depth Recommended pick and place nozzle OD: 4 mm; ID: ≤ 2 mm

Document 1244-7 Revised 01/05/15 -40 -20 02 04 06 08 0 100 140120 Ambient temperature (°C) Pe rcent of rated c urrent 120 110 100 Isat Irms 25° C Current Derating Shielded Power Inductors – LPZ4018 Typical L vs Current Typical L vs Frequency Weight 90 – 100 mg Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.9 mm pocket depth Recommended pick and place nozzle OD: 4 mm; ID: ≤ 2 mm Dimensions are in inches mm

Document 1244-8 Revised 01/05/15 Shielded Power Inductors – LPZ4414 Typical L vs Current Typical L vs Frequency Current Derating -40 -20 02 04 06 08 0 100 140120 Ambient temperature (°C) Pe rcent of rated c urrent 120 110 100 Isat Irms 25° C Dimensions are in inches mm Dimensionsare of the case not including the termination.For maximumoverall dimensionsincludingthe termination,add 0.005 in/0,13 mm. For optionaltin-leadand tin-silver-copper terminations,dimensionsare for the mountedpart. Dimensionsbefore mounting can be an additional0.005 inch/0,13 mm). 0.169 ±0.004 4,30 ±0,10 0.169 ±0.004 4,30 ±0,10 0.059 1,50 Winding direction Dash number 0.0551 1,40 max Internal code XXXX 0.185 4,70 0.118 3,00 0.128 3,25 0.059 1,50 0.185 4,70 0.055 1,40 Recommended Land Pattern 0.118 3,00 0.124 3,15 0.030 0,75 typ typ0.030 0,75 Weight 82.3 – 89.8 mg Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.52 mm pocket depth Recommended pick and place nozzle: OD: 4.5 mm; ID: ≤ 2 mm

Document 1244-9 Revised 01/05/15 Shielded Power Inductor – LPZ5010 Typical L vs Current Typical L vs Frequency Current Derating -40 -200 20 40 60 80 100 140120 Ambient temperature (°C) Pe rcent of rated c urrent 120 110 100 Isat Irms 25° C Weight 70 – 75 mg Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.02 mm pocket depth Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm Dimensions are in inches mm

Document 1244-10 Revised 01/05/15 Shielded Power Inductors – LPZ5015 Typical L vs Current Typical L vs Frequency Typical Current Derating -40 -20 02 04 06 08 0 100 140120 Ambient temperature (°C) Pe rcent of rated c urrent 120 110 100 Isat Irms 25° C Dimensions are in inches mm Weight 102 – 107 mg Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.57 mm pocket depth Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm