LPR251 PFS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
PRESS FIT AUTOMOTIVE RECTIFIER VOLTAGE RANGE 100 to 600 Volts LPR251 THRU LPR256 CURRENT 25.0 Amperes TECHNICAL SPECIFICATION：
FEATURES
- Low Leakage
- Low forward voltage drop
- High current capability
- High forward surge current capacity MECHANICAL DATA
- Technology: Cell with Vacuum soldered
- Case: Copper case
- Polarity: As marked of case bottom
- Lead: Plated lead , solderable per MIL-STD-202E method 208C
- Mounting: Press Fit
- Weight: 0.23 ounces, 6.58 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
- Ratings at 25℃ ambient temperature unless otherwise specified
- Single Phase, half wave, 60HZ, resistive or inductive load
- For capacitive load derate current by 20% SYMBOLS LPR251 LPR252 LPR253 LPR254 LPR256 UNIT Maximum Repetitive Peak Reverse Voltage V RRM 100 200 300 400 600 Volts Maximum RMS Voltage V RMS 70 140 210 280 420 Volts Maximum DC Blocking Voltage V DC 100 200 300 400 600 Volts Maximum Average Forward Rectified Current, At Tc=105℃ I(AV) 25 Amps Peak Forward Surge Current 3.3mS single half sine wave superimposed on Rated load (JEDEC method) IFSM 400 Amps Rating for fusing (t＜8.3ms) I 2t 664 A 2S Maximum instantaneous Forward Voltage at 100A VF 1.10 Volts
5.0 Maximum DC Reverse Current at Rated TA=25℃
DC Blocking Voltage TA=100℃ IR 450 UA Typical Thermal Resistance R θJC 0.8 ℃/W Operating and Storage Temperature Range T J,TSTG (-65 to +175) ℃ Notes: 1. Enough heatsink must be considered in application. LC-1 Dimensions in inches and (millimeters) Epoxy Negative Positive 26.00±0.26 1.02±0.01 0.872±0.01 21.00±0.26 (3.40-3.80) 0.133-0.149 0.39(9.95) 0.397-0.399 10.09-10.15 0.333 8.45MAX (Φ1.28±0.05) 0.050±0.002 Web Site: WWW.PS-PFS.COM
PRESS FIT AUTOMOTIVE RECTIFIER (LUCAS) VOLTAGE RANGE 100 to 600 Volts LPR251 THRU LPR256 CURRENT 25.0 Amperes RATINGS AND CHARACTERISTIC CURVES LPR251 THRULPR256 F1G.2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT F1G.1 TYPICAL FORWARD CURRENT DERATING GURVE
1 Cycle
CURRENT,(A) 8.3ms Single Half Sine-Wave (JEDEC Method) Tj=Tj max AVERAGE FORWARD CURRENT, (A) AMBIENT TEMPERATURE, ()℃ 125100 150 1757550250 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375″(9.5mm) Lead Length 100 T1=25℃ PULSE WIDTH=300μS 1%DUTY CYCLE 0.1 1.0 100 1000 INSTANTANEOUS FORWARD VOLTAGE,(V) INSTANTANEOUS FORWARD CURRENT, (A) F1G.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 400 200 300 600 500 50403020100 SQUARE WAVE DC AVERAGE POWER DISSIPATION (W) AVERAGE FORWARD CURRENT, (A) F1G.4 FORWARD ROWER DISSIPATION Web Site: WWW.PS-PFS.COM