LPQ110 EMERSON-NETWORKPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Technical Support: (888) 41-ASTEC or (407) 241-2752 Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662102 Special Features Electrical Specs

110 Watts

Inrush current <18 A peak @ 115 VAC; <36 A peak @ 230 VAC, cold start @ 25°C Input current 2.5 A max. (RMS) @ 115 VAC Efficiency 70% typical at full load EMI filter FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted Safety ground leakage current <0.5 mA @ 50/60 Hz, 264 VAC input Output Maximum power 80 W for convection;

110 W with 30 CFM forced air

Adjustment range ±5% min. on main; 5-25 V on 4th output on LPQ112 and LPQ113 Cross regulation ±2% on output 1; ±3% on outputs 2, 3 & 4 Hold-up time 20 ms @ 80 W load, 115 VAC nominal line Overload protection Short circuit protection on all outputs. Case overload protected @ 110-145% above peak rating Overvoltage protection 5.7-6.7 VDC on main output. Latching type, recycle AC to reset. Logic Control Power Failure TTL logic signal goes high 50-150 msec after 5 V output. It goes low at least 4 msec before loss of regulation. Remote sense Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected. Operating temperature: 0° to 50°C ambient derate each output at 2.5% per degree from 50° to 70°C Electromagnetic susceptibility: Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3 Humidity: Operating; non-condensing 5% to 95% Vibration: Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances

0.75 G peak 5 Hz to 500 Hz, operational

Storage temperature: -40° to 85°C Temperature coefficient: ±.04% per °C MTBF demonstrated: >550,000 hours at full load and 25°C ambient conditions

  • Universal input
  • High efficiency
  • Remote sense on main output
  • Built-in EMI filter
  • Low output ripple
  • Adjustable 5 V output
  • Overvoltage protection
  • Overload protection
  • Adjustable floating 4th output (On LPQ112 and LPQ113)
  • P o w e r f a i l
  • Optional L bracket (-B suffix)
  • Cover kit available LPX110-C Environmental VDE 0805/EN60950 (IEC950) 11774-3336-1245 (LC #84997) UL UL1950 E132002 CSA CSA 22.2-234 Level 3 LR53982C NEMKO EN 60950/EMKO-TUE P94102464 (74-sec) 203 CB Certificate and report 1423, 1424, 1425 CE Mark (LVD) Electrical Specs Total Power: 80-110 Watts Input Voltage: 85-264 VAC 120-300 VDC # of Outputs: Quad rev 12.10.03

Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 AMERICAS

5810 Van Allen Way

Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 103 www.astecpower.com

Ordering Information

Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Model Output Minimum Maximum Load with Maximum Load with Peak Regulation2 Ripple Number Voltage Load Convection Cooling 30 CFM Forced Air Load1 P/P (PARD)3 LPQ112 5 V 2 A 9 A 11 A 15 A ±2% 50 mV 12 V 0 A 4.5 A 5 A 9 A ±3% 120 mV -12 V 0 A 0.7 A 1.0 A 1.5 A ±5% 120 mV ±5-25 V 0 A 2.5 A 3 A 3.5 A ±3% 240 mV, max. LPQ113 5 V 2 A 9 A 11 A 15 A ±2% 50 mV 15 V 0 A 4.5 A 5 A 9 A ±3% 150 mV -15 V 0 A 0.7 A 1.0 A 1.5 A ±5% 150 mV ±5-25 V 0 A 2.5 A 3 A 3.5 A ±3% 240 mV, max. LPQ114 5 V 2A 9 A 11 A 15 A ±2% 50 mV 12 V 0 A 4.5 A 5 A 9 A ±3% 120 mV -12 V 0 A 0.7 A 1.0 A 1.5 A ±5% 120 mV 24 V 0.5 A 3.5 A 4.5 A 5 A +10 / -5% 240 mV 1. Peak current lasting <30 seconds with a maximum 10% duty cycle. 2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 4. 4th O/P adjustable 5 to 25 V, factory set at 5 V. 5. Minimum loads are required. Note: -B suffix added to model number indicates L bracket option. 4.0" (101.6) 3.5" (88.9) 0.25" (6.35) 0.25" (6.35) 6.5" (165.1) 7.0" (177.8) 1.80" (45.7) 0.12" (3) SK 1 SK 2 0.156" (4) DIA (4 places) 3 N L GND 4th O/P ADJ SK 202 (POK) 1 2SK 201 (+S) 1 (-S) 2 5V O/P ADJ Connector LPQ112 LPQ113 LPQ114 SK1-1 GND GND GND SK1-3 Neutral Neutral Neutral SK1-5 Line Line Line SK2-1 +5 V +5 V +5 V SK2-2 +5 V +5 V +5 V SK2-3 +5 V +5 V +5 V SK2-4 Common Common Common SK2-5 Common Common Common SK2-6 Common Common Common SK2-7 Common Common Common SK2-8 +12 V +15 V +12 V SK2-9 +12 V +15 V +12 V SK2-10 -12 V -15 V -12 V SK2-11 +5-25 V +5-25 V +24 V SK2-12 -5-25 V -5-25 V Common SK201-1 +sense +sense +sense SK201-2 -sense -sense -sense SK202-1 POK POK POK SK202-2 GND GND GND Mating Connectors AC Input: Molex 09-50-8051 (USA) 09-91-0500 (UK) PINS: 08-58-0111 DC Outputs: Molex 09-50-8121 (USA) 09-91-1200 (UK) PINS: 08-58-0111 Remote sense/Power fail: Molex 22-01-1022 (USA) 22-01-1023 (UK) PINS: 08-50-0114 Astec Connector Kit #70-841-008, includes all of the above. Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ± 0.02” 3. Specifications are for convection rating at factory settings unless otherwise stated. 4. Mounting holes M1 and M2 should be grounded for EMI purposes. 5. Mounting hole M1 is safety ground connection. 6. L bracket mounting (6-32) maximum insertion depth is .20” (5). 7. Warranty: 1 year 8. Weight: 1.25 lb./0.57 kg Pin Assignments LPQ110 Series 4.28" (108.6) 2.5" (63.5) 6.4" (162.6) 7.3" (185.5) 2.2" (56) 5.9" (150.0) 0.86" (21.8) #6-32 PEM 6 places -B Bracket