LPP100 ASTRODYNE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
100W Single Output with PFC Function LPP100 series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 Universal AC input Protections:Short circuit/Over load/Over voltage Built-in active PFC function Cooling by free air convection Fixed switching frequency at PFC:67KHz PWM:134KHz Model Number Output Volts Output Amps Ripple & Noise Min Load DC Volt Adjust Load Reg Efficiency SINGLE OUTPUT LPP100-5 5 Volts(DC) 20 Amps 100mV pk-pk 0~20Amps 4.75~5.5Volt(DC) ±1.0% 75%
100W Single Output with PFC Function LPP100 series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 INPUT SPECIFICATIONS Input Voltage Range (Note 3) 90 ~ 264VAC 120~370 Volts(DC) Frequency Range 47-63 Hz Inrush Current, typ: (cold start) 30Amps / 230VAC Input Current 1.7 Amps. @ 115VAC 0.75 Amps. @ 230VAC Leakage current < 2mAmps / 240VAC Min Load See Selection Chart Power Factor @ FL PF> 0.95 / 230VAC 0.98 / 115VAC OUTPUT SPECIFICATIONS Voltage and Current See Selection Chart Line Regulation ±0.5% Load Regulation See Selection Chart Voltage Tolerance (Note 2) ±2.0%: 3.3~15Volts(DC) ±1.0%: 24~48Volts(DC) Ripple/Noise (Note 1) See Selection Chart Hold Up Time @ FL 28mS /230VAC; 28mS/115VAC Setup, Rise Time @ FL 600ms, 30mS/ 230VAC 1200ms, 30mS/115VAC Over Voltage Protection 3.8 ~ 4.45Volt(DC): 3.3Volts(DC) 5.75 ~ 6.75Volt(DC): 5Volts(DC) 8.6 ~ 10.1Volt(DC): 7.5Volts(DC) 13.8 ~ 16.2Volt(DC): 12Volts(DC) 15.5 ~ 18.2Volt(DC): 13.5Volts(DC) 17.25~ 20.25Volt(DC): 15Volts(DC) 27.6 ~ 32.4Volt(DC): 24Volts(DC) 31 ~ 36.45Volt(DC): 27Volts(DC) 55.2 ~ 64.8Volt(DC): 48Volts(DC) Shut down o/p voltage,re-power Over Current Protection 105 ~ 150% rated output power Constant current limiting,auto recover DC Volt Adjust See Selection Chart GENERAL SPECIFICATIONS Safety UL60950-1, TUV EN60950-1 Approved Insulation Resistance ≥ 100MΩ / 500Volts(DC) EMI Compliance to EN55022B (CISPR22B) Harmonic Current Compliance to EN61000-3-2,-3 Efficiency See Selection Chart Isolation 3000VAC Input - Output 1500VAC Input - Ground 500VAC Output - Ground EMS Compliance to ENV50204, light Industry Level, Criteria A ENVIRONMENTAL SPECIFICATIONS Oper. Temperature -10°C to +60°C (See Derate Curve) Storage Temperature -20°C to +85°C, 10~95% RH Relative Humidity 20~90% RH non cond Temperature Coefficient ±0.05% / °C (0-50°C) MTBF 224.3KHrs min,MIL-HDBK-217F(25°C) Vibration 10~500Hz, 2G10min./1cycle, period for 60min. each along X, Y, Z axes PHYSICAL SPECIFICATIONS Size Millimeters 222 x 62 x 32 Inches 8.74” x 2.44 ” x 1.26 ” Weight 17.99 oz (510g) NOTE 1. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Tolerance : includes set up tolerance, line regulation and load regula- tion. 3. Derating may be needed under low input voltages. Please check the derating curve for more details. All specifications are typical at nominal input, full load, and 25°C unless other- wise noted
100W Single Output with PFC Function LPP100 series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458
100W Single Output with PFC Function LPP100 series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458