LPO6013 COILCRAFT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

© Coilcraft, Inc. 2009 Specifications subject to change without notice. Please check our website for latest information. SMT Power Inductors - LPO6013 Series Document 286-1 Document 286-1 Revised 10/15/08 1. When ordering, please specify termination and packaging code: LPO6013-473KLC Termination: L = RoHS compliant silver-palladium-platinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C =7 ″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =1 3″ machine-ready reel. EIA-481 embossed plastic tape (3500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DC current at which the inductance drops 10% (typ) from its value without current. 4. Current that causes a 40°C temperature rise from 25°C ambient. 5. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering.

1 DCR SRF

2Part number1 (µH) (Ohms) (MHz) (A) (A) LPO6013-102ML_ 1.0 ±20% 0.06 200 1.9 1.5 LPO6013-152ML_ 1.5 ±20% 0.07 200 1.6 1.4 LPO6013-222ML_ 2.2 ±20% 0.08 150 1.3 1.3 LPO6013-332ML_ 3.3 ±20% 0.11 110 1.1 1.3 LPO6013-392ML_ 3.9 ±20% 0.13 100 1.0 1.2 LPO6013-472ML_ 4.7 ±20% 0.15 90 0.90 1.2 LPO6013-682ML_ 6.8 ±20% 0.20 70 0.70 1.2 LPO6013-822ML_ 8.2 ±20% 0.22 65 0.70 1.0 LPO6013-103KL_ 10 . ±10% 0.30 60 0.60 1.0 LPO6013-153KL_ 15 . ±10% 0.38 47 0.55 0.85 LPO6013-223KL_ 22 . ±10% 0.52 37 0.45 0.80 LPO6013-333KL_ 33 . ±10% 0.73 30 0.40 0.74 LPO6013-393KL_ 39 . ±10% 0.96 28 0.35 0.67 LPO6013-473KL_ 47 . ±10% 1.0 25 0.30 0.60 LPO6013-683KL_ 68 . ±10% 1.7 21 0.28 0.49 LPO6013-104KL_ 100 . ±10% 3.2 17 0.22 0.35 LPO6013-154KL_ 150 . ±10% 4.3 14 0.19 0.30 LPO6013-224KL_ 220 . ±10% 5.8 10 0.15 0.26 LPO6013-334KL_ 330 . ±10% 7 8 0.13 0.23 LPO6013-474KL_ 470 . ±10% 10 7 0.10 0.20 LPO6013-684KL_ 680 . ±10% 14 5.6 0.09 0.18 LPO6013-105KL_ 1000. ±10% 21 4.7 0.07 0.13 Designer’s Kit C352 contains 3 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 111 – 122 mg Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7″reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.4 mm pocket depth Recommended pick and place nozzle OD: 5.6 mm; ID: ≤ 2.8 mm PCB washing Only pure water or alcohol recommended  Very low profile – only 1.3 mm high!  Handles saturating current up to 1.9 Amps

© Coilcraft, Inc. 2009 Specifications subject to change without notice. Please check our website for latest information. SMT Power Inductors - LPO6013 Series Document 286-2 Document 286-2 Revised 10/15/08 0.01 0.1 11 0 Current (A) 0.1 100 1000 10000 Inductance (µH) 100 µH 10 µH 1µ H 1000 µH Typical L vs Frequency Typical L vs Current 0.1 100 10000 1000 0.01 0.1 101 Inductance (µH) Frequency (MHz) 1000 µH 100 µH 10 µH 1µ H 0.220 5,6 max 0.051 1,3 max 0.230 5,84 0.134 3,4 0.050 1,27 0.040 ±0.005 1,016 ±0,127 0.236 6,0 max 0.200 5,08 Recommended Land Pattern Dash number Internal code XXX X Irms Derating -40 -20 0 20 40 60 80 100 140 120 Ambient temperature (°C) 120 110 100 25°C Percent of rated rms I Dimensions are in inches mm