LPO2506I-472L COILCRAFT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

© Coilcraft, Inc. 2009 Specifications subject to change without notice. Please check our website for latest information. SMT Power Inductors - LPO2506 Series Document 208-1 Document 208-1 Revised 10/14/08 InBoard style On-board style L ±20% 2 DCR max SRF typ Isat3 Irms4 part number1 part number1 (µH) (Ohms) (MHz) (A) (A) LPO2506I-472L_ LPO2506O-472L_ 4.7 0.145 90 1.6 1.9 LPO2506I-682L_ LPO2506O-682L_ 6.8 0.165 75 1.3 1.7 LPO2506I-822L_ LPO2506O-822L_ 8.2 0.200 65 1.0 1.5 LPO2506I-103L_ LPO2506O-103L_ 10 0.240 60 1.0 1.5 LPO2506I-153L_ LPO2506O-153L_ 15 0.300 45 0.90 1.3 LPO2506I-223L_ LPO2506O-223L_ 22 0.420 35 0.70 1.0 LPO2506I-333L_ LPO2506O-333L_ 33 0.550 30 0.60 0.90 LPO2506I-473L_ LPO2506O-473L_ 47 0.765 22 0.50 0.70 LPO2506I-683L_ LPO2506O-683L_ 68 1.10 20 0.40 0.60 LPO2506I-104L_ LPO2506O-104L_ 100 1.60 15 0.30 0.50 LPO2506I-154L_ LPO2506O-154L_ 150 2.50 12 0.25 0.40 LPO2506I-224L_ LPO2506O-224L_ 220 3.65 10 0.22 0.32 LPO2506I-334L_ LPO2506O-334L_ 330 4.65 8.0 0.18 0.28 LPO2506I-474L_ LPO2506O-474L_ 470 6.75 6.5 0.14 0.24 LPO2506I-684L_ LPO2506O-684L_ 680 9.15 5.5 0.12 0.20 LPO2506I-105L_ LPO2506O-105L_ 1000 14.20 4.5 0.10 0.16 1. When ordering, please specify termination and packaging codes: LPO2506O-105LD Termination: L = RoHS compliant silver-palladium-platinum-glass frit Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: D =1 3″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent. 3. DC current at which the inductance drops 10% (typ) from its value without current. 4. Current that causes a 40°C temperature rise from 25°C ambient. 5. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Designer’s Kit C332 contains 3 of all InBoard® styles Designer’s Kit C333 contains 3 of all On-board styles Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 240 – 260 mg Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth PCB washing Only pure water or alcohol recommended  On-board style – 1.65 mm high  InBoard ® style – only 1.19 high

© Coilcraft, Inc. 2009 Specifications subject to change without notice. Please check our website for latest information. SMT Power Inductors - LPO2506 Series Document 208-2 Revised 10/14/08 Document 208-2 Typical L vs Frequency Typical L vs Current Current Derating 0.01 0.1 11 0 100 1000 10000 Inductance (µH) 0.01 0.1 11 0 Frequency (MHz) 1000 µH 100 µH 10 µH 100 1000 10000 0.01 0.1 11 0 Current (A) Inductance (µH) 100 µH 10 µH 1000 µH On-board Style InBoard Style 0.360 9,14 0.360 9,14 0.285 7,24 0.285 7,24 0.285 7,24 0.285 7,24 0.048 1,21 0.048 1,21 0.380 9,65 0.380 9,65 0.310 7,87 0.205 5,21 0.190 4,83 0.030 0,76 0.310 7,87 0.230 5,84 0.230 5,84 0.284 7,21 max max max max max max max max Dash number 0.205 5,21 0.190 4,83 0.030 0,76 hole through board Recommended Land Pattern Recommended Land Pattern 0.254 6,45 0.061 1,55 max max 0.047 1,19 max Mounting plane: through board 0.254 6,45 0.065 1,65 max max 103 -40 -20 0 20 40 60 80 100 140 120 Ambient temperature (°C) 120 110 100 25°C Percent of rated rms I