LPF-1002-70

LPF-1002-70 HOLLAND | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 1

Technical content

Specifications subject to change at Amphenol Broadband Solutions discretion amphenolbroadband.com | Customer Service: 1-800-677-2288 DS-65-0170 Rev. 2.0 Point of Entry Filter LPF-1002-70 LPF-1002-70 Item Min Typical Max Unit Frequency Range 5 - 3000 MHz Impedance 75 Ω Pass Band 3.05 5 - 1002 MHz Insertion Loss (5 - 65 MHz) 0.1 0.1 dB Insertion Loss (65 - 80 MHz) 0.5 0.75 dB Insertion Loss (860 - 1002 MHz) 1.5 2.0 dB Return Loss (5 - 65 MHz) 18 18 dB Return Loss (65 - 80 MHz) 16 17 dB Return Loss (860 - 1002 MHz) 16 17 dB Stop Band 1125 - 3000 MHz Rejection (1125 - 2000 MHz) 70 70 dB Operating Temperature -40 ~60 ˚C Humidity 0% to 100% relative humidity Withstanding Tightening Torque Female “F” Port 60 Inch.lbs Withstanding Tightening Torque Male “F” Port 60 Inch.lbs Conforms to ANSI/SCTE 81 2003, IEEE C62.41-1991 Cat. B3 waveform, 6kV 3000A Specifications: Model No.: LPF-1002-70 Low Pass Filter A MoCA Multimedia Network is a local area network characterized by wide bandwidth RF signal streams operating at high signal levels above the 1GHz CATV band at 1125 to 1675 MHz. These networks must be isolated from each other to prevent interference and failure. Due to the common, party-line nature of the CATV plant, a low pass filter can be used effectively to stop the MoCA signal traffic from leaking across the network boundaries. This is known as a Point Of Entry filter. The LPF-1002-70 offers up to -70 dB rejection at these frequencies.