LPC10065

LPC10065 KOA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. PAGE 1 OF 4 Power Chip Inductors Type LPC10065 1. Scope This specification applies to LPC10065 power chip inductors produced by KOA Corporation. 3. Type Designation The type designation shall be the following form: SS-216 R4 AHA 6/30/06 KOA SPEER ELECTRONICS, INC. Size ToleranceNominal Inductance

10065 K: ±10%

M: ±20% 101: 100µH 221: 220µH 152: 1500µH

10065 K101

TED: 10" Embossed Plastic 300 pcs/reel TED Termination Material A: SnAg (Other termination styles available, contact factory for options) ALPC Type New Type CERTIFIED CERTIFIED 2. Dimensions and Construction D C E F F A B Ferrite Core Magnet Wire Electrode Ceramic Substrate ABCDEF Dimensions inches (mm) ø.394±.008 (ø10.0±0.2) .295 Max. (7.5 Max.) .098±.008 (2.5±0.2) .409±.008 (10.4±0.2) .315±.008 (8.0±0.2) .354 (9.0)10065 Size

Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. PAGE 2 OF 4 SS-216 R4 4. Rating KOA SPEER ELECTRONICS, INC. No. Item Specification

1 Storage temperature range -40°C ~ +85°C

2 Operating temperature range -30°C ~ +85°C

4.1 Rating

(µH) DC Resistance Maximum (Ω) Allowable DC Current Maximum (Amps) Self Resonant Frequency Minimum (MHz) Quality Factor Minimum (MHz) Measured Frequency (Hz) Inductance Tolerance M: ±20% L Meas. Freq.

1 MHz

Q Meas. Freq.

2.52 MHz

LPC10065ATEDR68M 0.68 75.0 6.0 m Ω 9.50 LPC10065ATED1R0M 1.0 65.0 7.0 m Ω 9.00 LPC10065ATED1R5M 1.5 50.0 8.0 m Ω 8.50 LPC10065ATED2R2M 2.2 40.0 9.0 m Ω 7.50 LPC10065ATED3R3M 3.3 30.0 0.012 6.80 LPC10065ATED4R7M 4.7 25.0 0.017 5.70 LPC10065ATED6R8M 6.8 20.0 0.024 4.70 LPC10065ATED100K 10 15.0 0.036 3.90 LPC10065ATED150K 15 12.0 0.054 3.15 LPC10065ATED220K 22 9.0 0.080 2.60 LPC10065ATED330K 33 8.0 0.120 2.30 LPC10065ATED470K 47 6.0 0.175 1.79 K: ±10% K: ±10% 30 100 MHz LPC10065ATED681K 680 1.0 2.70 0.47 LPC10065ATED102K 1000 0.95 4.00 0.38 LPC10065ATED152K 1500 0.85 6.10 0.31 LPC10065ATED222K 2200 0.70 9.00 0.26 LPC10065ATED332K 3300 0.55 13.5 0.21 LPC10065ATED680K 68 5.0 0.255 1.48 LPC10065ATED101K 100 4.0 0.380 1.22 LPC10065ATED151K 150 3.0 0.580 1.00 LPC10065ATED221K 220 2.5 0.850 0.82 LPC10065ATED331K 330 2.0 1.30 0.67 LPC10065ATED471K 470 1.5 1.85 0.57

Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. PAGE 3 OF 4 Item Requirement Test Methods DC Super-imposition ∆L/L within -5% Inductance when the allowable current is applied Resistance to No evidence of outer damage Solder 260 ± 5°C/10 sec soldering heat ∆L/L shall be within ±5% Vibration ∆L/L within ±5% 2 hours in each direction of X, Y, Z, at a frequency range of 10 ~ 55 ~10Hz with 1.5 mm amplitude Heat shock ∆L/L within ±5% -40 ± 2°C/0.5 Hr 85 ± 2°C/0.5 Hr 100 cycles High temperature ∆L/L within ±5% Store at 85 ± 2°C 500 Hrs. leaving Low temperature ∆L/L within ±5% Store at -40 ± 2°C 500 Hrs. leaving Moisture leaving ∆L/L within ±5% 40 ± 2°C 90 ~ 95% RH 500 Hrs. 5. Reliability Test 85°C -40°C 0.5 Hr 6. Taping

6.1 Dimensions of Tape

.157 (4.0 ± 0.1) .433 (11.0) .016 (0.4) .275 (7 ± 0.2) .452 (11.5)Embossed tape Top tape peeling strength: .008 ~ .027 (0.2N ~ 0.69N) .944 (24 ± 0.3) .452 (11.5 ± 0.1) Direction of feed Blank 1.57 (40mm min.) Chip mounting Blank 1.97 (50 mm min.) Tape leader 5.90 (150 mm min.) End Beginning KOA SPEER ELECTRONICS, INC. Dimensions in inches (mm)

Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. PAGE 4 OF 4 SS-216 R4

6.2 Dimensions and Marking

6.3 Performance

The following items shall be indicated on the reel. Type: LPC10065 (1) Nominal inductance and tolerance (2) Quantity (3) Production lot number (4) Manufacturer's name or trade mark Recommended PAD dimension ø3.15 (ø80) 1.02 (26.0) .079 (2.0) .079 (2.0) ø.511 (ø13.0) ø.826 (ø21.0) ø14.943 (ø380) Soldering pad .157 (4.0) .197 (5.0) .157 (4.0) .236 (6.0) Dimensions in inches (mm) Dimensions in inches (mm) 100mA 1,000mA Inductance DC-Current 10 µH 100 µH 1000 µH Type LPC10065 2.2mH 1.5mH 1.0mH 680µH 470µH 330µH 220µH 150µH 100µH 68µH 47µH 33µH 22µH 15µH 10µH 6.8µH 4.7µH 3.3µH 2.2µH 60Q Factor Frequency 1.0 µH Q-f Characteristics Type LPC10065 10KHz 100KHz 1MHz 10MHz 2.2 µH 3.3 µH 4.7 µH 6.8 µH 60Q Factor Frequency 10 µH Q-f Characteristics Type LPC10065 10KHz 100KHz 1MHz 10MHz 2.2 µH 4.7 µH 3.3 µH 6.8 µH 60Q Factor Frequency 100 µH Q-f Characteristics Type LPC10065 10KHz 100KHz 1MHz 10MHz 220 µH 330 µH 680 µH 60Q Factor Frequency Q-f Characteristics Type LPC10065 10KHz 100KHz 1MHz 10MHz 2.2 mH 1.5 mH 1 mH KOA SPEER ELECTRONICS, INC.