LP358 TI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

www.ti.com

FEATURES

(TOP VIEW) 1OUT 1IN− 1IN+ GND VCC 2OUT 2IN− 2IN+

APPLICATIONS

IN− IN+ OUT LP358, LP2904 ULTRA-LOW-POWER DUAL OPERATIONAL AMPLIFIERS SLOS475 AUGUST 2005 Low Supply Current µ A Typ Low Offset Voltage mV Typ Low Input Bias Current nA Typ Input Common Mode to GND Wide Supply Voltage V V CC V Pin Compatible With LM358 LCD Displays Portable Instrumentation Sensor/Metering Equipment Consumer Electronics (MP3 Players, Toys) Power Supplies The LP358 and LP2904 are dual low-power operational amplifiers especially suited for battery-operated applications. Good input specifications and wide supply-voltage range still are achieved, despite the ultra-low supply current. Single-supply operation is achieved with an input common-mode range that includes GND. The LP358 and LP2904 are ideal in bandwidth. These instrumentation, LCD displays, consumer electronics (MP3 players, toys, etc.), and power supplies. ORDERING INFORMATION T A PACKAGE (1) ORDERABLE PART NUMBER TOP-SIDE MARKING Tube of LP358D SOIC D LP358 Reel of 2500 LP358DR C to C Tube of 100 LP358DGK VSSOP DGK Reel of 250 LP358DGKT PREVIEW Reel of 2500 LP358DGKR Tube of LP2904D SOIC D PREVIEW Reel of 2500 LP2904DR C to C Tube of 100 LP2904DGK VSSOP DGK Reel of 250 LP2904DGKT PREVIEW Reel of 2500 LP2904DGKR SYMBOL (EACH AMPLIFIER) (1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical sheet. PRODUCTION DATA information is current as of publication date. Copyright 2005, Texas Instruments Incorporated Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

www.ti.com VCC OUT IN− IN+ Absolute Maximum Ratings (1) ESD Protection LP358, LP2904 ULTRA-LOW-POWER DUAL OPERATIONAL AMPLIFIERS SLOS475 AUGUST 2005 SCHEMATIC (EACH AMPLIFIER) over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT V CC Supply voltage range (2) or V V ID Differential input voltage (3) V V I Input voltage (either input) 0.3 V Duration of output short circuit (one amplifier) to ground at (or below) T A V CC V (4) Unlimited D package θ JA Package thermal impedance (5) (6) C/W DGK package 172 T J Operating virtual junction temperature 150 C T stg Storage temperature range 150 C (1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) All voltage values (except differential voltages and V CC specified for the measurement of I OS are with respect to the network GND. (3) Differential voltages are at IN+, with respect to IN (4) Short circuits from outputs to V CC can cause excessive heating and eventual destruction. (5) Maximum power dissipation is a function of T J (max), θ JA and T A The maximum allowable power dissipation at any allowable ambient temperature is P D J (max) T A θ JA Operating at the absolute maximum T J of 150 C can affect reliability. (6) The package thermal impedance is calculated in accordance with JESD 51-7. TEST CONDITIONS TYP UNIT Human-Body Model kV

www.ti.com Electrical Characteristics Operating Conditions LP358, LP2904 ULTRA-LOW-POWER DUAL OPERATIONAL AMPLIFIERS SLOS475 AUGUST 2005 T A V CC V IC V CC /2, R L 100 k Ω to GND (unless otherwise noted) LP358 LP2904 PARAMETER TEST CONDITIONS (1) T A (2) UNIT MIN TYP (3) MAX MIN TYP (3) MAX C V IO Input offset voltage mV Full range C I IB Input bias current nA Full range C 0.2 0.5 I IO Input offset current nA Full range C 100 Large-signal R L k Ω to GND, A V V/mV voltage gain V CC V Full range C Common-mode V CC CMRR dB rejection ratio V IC V to V CC 1.5 V Full range C Power-supply k VSR V CC V to V V rejection ratio Full range C 150 150 I CC Supply current R L µ A Full range 250 275 C 3.4 3.6 3.4 3.6 Output voltage I L 0.35 mA to GND, V OH V swing (high) V IC V Full range V CC 1.9 V CC 1.9 C 0.82 0.7 0.82 0.7 Output voltage I L 0.35 mA from V CC V OL V swing (low) V IC V Full range C Output source I O V O V ID V mA current Full range C V O 1.5 V ID V Full range I O Output sink current mA C V O 1.5 V ID V IC V Full range C I OS,GND Output short to GND V ID V mA Full range C I OS,VCC Output short to V CC V ID V mA Full range Input offset α V IO C µ C voltage drift Input offset α I IO C pA/ C current drift (1) For full-range temperature limits: V CC V to V ICR V to V CC 1.5 V (unless otherwise noted) (2) Full range is C to C for LP358 and C to C for LP2904. (3) All typical values are at T A V CC T A C PARAMETER TYP UNIT GBW Gain bandwidth product 100 kHz SR Slew rate V/ms

Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) LP358D ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LP358DE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LP358DR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LP358DRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM (1)The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontentfor the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS):TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br):TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. PACKAGE OPTION ADDENDUM www.ti.com 23-Sep-2005 Addendum-Page 1

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright  2005, Texas Instruments Incorporated