LMU-75V PAIRUI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
www.pairuigroup.com Page: 1 / 3 Date: 01/07/2014 ConstantvoltageLEDDrivers For indoor use LMU-75VSeries,75Watt FEATURES: /checkbld/checkbld /checkbld/checkbldConstantvoltageoutput /checkbld/checkbld /checkbld/checkbldInputvoltagerange100-240Vac /checkbld/checkbld /checkbld/checkbldShort circuit, overload, over voltage and over temperature protections /checkbld/checkbld /checkbld/checkbldActive power factor correction /checkbld/checkbld /checkbld/checkbldDesigned to worldwide safety standards for lighting /checkbld/checkbld /checkbld/checkbldCoolingbyfreeairconvection /checkbld/checkbld /checkbld/checkbld3yearswarranty Model Inputvoltage (Vac) Outputvoltage (Vdc) Outputcurrent (mA) Outputpower (W) Min. Max. LMU75-V12 100-240 12 0 6250 75 LMU75-V24 24 0 3120 75 ELECTRICAL Input Parameters Symbols TestConditions/Comment Min. Typ. Max. Units Input voltage Vin --- 100 -- 240 Vac Input frequency Fline --- 47 -- 63 Hz Input current Iin Full load, Vin =230Vac -- -- 0.6 A Inrush current Iinrush Cold start, Vin =230Vac -- -- 80 A Power factor PF 70%~100% load, Vin =220Vac -- 0.9 0.98 PF Efficiency η Full voltage, full load -- 88 89 % Output Output current Iout LMU75-V12 -- 6250 -- mA LMU75-V24 -- 3120 -- mA Output voltage Vout LMU75-V12 11.4 12 12.6 V LMU75-V24 22.8 24 25.2 V Line regulation Iout-line Vin from 100Vac to 240Vac -- -- 1 %
www.pairuigroup.com Page: 2 / 3 Date: 01/07/2014 ConstantvoltageLEDDrivers For indoor use LMU-75VSeries,75Watt ELECTRICAL Output Parameters Symbols TestConditions/Comment Min. Typ. Max. Units Load regulation Iout-load Vout from min. To max. -- -- 3 % Turn-on delay time Ton_delay Cold start, power on -- -- 2 S Ripple -- --- -- 200 240 mV Protection Overload Hiccup mode, it will recover automatically after f ault conditions remove Short circuit Hiccup mode, it will recover automatically af ter fault conditions remove Over temperature Protection type: shut down o/p voltage rec overs automatically after temperature goes down Over voltage Protection type: shut down and latch off O/P vol tage ,re-power on to recover Environment Storage Tstorage Humidity: 5% RH to 95% RH -40 -- +80 ℃ Ambient operating temperature Ta Startup at rated voltage -20 -- +45 ℃ Maximum case temperature Tc Hot-spot on case -- -- +80 ℃ Operating relative humidity Ha Non condensing 10 -- 95 % MTBF TMTBF Full load, 220Vac input, 25 ℃ ambient temperature -- -- 30 kHrs Dimension(LxWxH) 172.2x63x30mm Safety/EMC Safety standards IEC61347-1 IEC61347-2-13 EMI IEC55015 EMS IMMUNITY IEC61547 THD IEC61000-3-2 Notes:Unlessotherwisespecified,alltheaboveparameter saremeasuredatambienttemperatureof25 ℃℃ ℃℃ and Vin=100Vacto240Vac.
www.pairuigroup.com Page: 3 / 3 Date: 01/07/2014 ConstantvoltageLEDDrivers For indoor use LMU-75VSeries,75Watt MECHANICAL 53.4 136.5 172.2 Unit: mm