LMP2012QML-SP TI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 13

Technical content

www.ti.com SNOSAU5H –MARCH 2007–REVISED APRIL 2013 LMP2012QMLDualHighPrecision,Rail-to-RailOutputOperationalAmplifier 1FEATURES DESCRIPTION The LMP2012 offersunprecedentedaccuracy and 2• TotalIonizingDose 50 krad(Si) stability.This deviceutilizespatentedtechniquesto• ELDRS Free 50 krad(Si) measure and continuallycorrecttheinputoffseterror

  • TCV IO Temperature Sensitivity(Typical)0.015 voltage.The resultisan amplifierwhichisultrastable µV/°C over time and temperature.Ithas excellentCMRR and PSRR ratings,and does not exhibitthe familiar(ForVS = 5V,TypicalUnless OtherwiseNoted) 1/fvoltageand currentnoiseincreasethatplagues• Low Ensured VIO over Temperature 60 µV traditionalamplifiers.The combination of the
  • Low Noise withno 1/f35nV/√Hz LMP2012 characteristicsmakes ita good choicefor transduceramplifiers,highgainconfigurations,ADC• High CMRR 90 dB bufferamplifiers,DAC I-Vconversion,and any other• High PSRR 90 dB 2.7V-5Vapplicationrequiringprecisionand longterm
  • High A VOL 85 dB stability.
  • Wide Gain-Bandwidth Product 3MHz Other usefulbenefitsof the LMP2012 are rail-rail
  • High Slew Rate 4V/µs output,low supplycurrentof930 μA, and wide gain- bandwidth product of 3 MHz. These extremely• Rail-to-RailOutput 30mV versatilefeaturesfoundintheLMP2012 providehigh• No ExternalCapacitorsRequired performanceand ease ofuse. The QMLV versionoftheLMP2012 has been ratedtoAPPLICATIONS toleratea totaldose levelof 50krad/(Si)radiationby• Attitudeand OrbitalControls testmethod 1019 ofMIL-STD-883.
  • StaticEarthSensing
  • Sun Sensors
  • InertialSensors
  • PressureSensors
  • Gyroscopes
  • EarthObservationSystems Connection Diagram Figure1. 10-Lead CLGA (Top View) See NAC Package These deviceshave limitedbuilt-inESD protection.The leadsshouldbe shortedtogetherorthedeviceplacedinconductivefoam duringstorageorhandlingtopreventelectrostaticdamage totheMOS gates. Pleasebe aware thatan importantnoticeconcerningavailability,standardwarranty,and use incriticalapplicationsof Texas Instrumentssemiconductorproductsand disclaimerstheretoappearsattheend ofthisdatasheet. 2Alltrademarksarethepropertyoftheirrespectiveowners. PRODUCTION DATA informationiscurrentas ofpublicationdate. Copyright© 2007–2013,Texas InstrumentsIncorporatedProductsconform to specificationsper the terms of the Texas Instrumentsstandardwarranty.Productionprocessingdoes not necessarilyincludetestingofallparameters.

SNOSAU5H –MARCH 2007–REVISED APRIL 2013 www.ti.com AbsoluteMaximum Ratings(1) SupplyVoltage 5.8V DifferentialInputVoltage ±SupplyVoltage Power Dissipation(2) 714mW Maximum JunctionTemperature(TJmax ) 150°C Common-Mode InputVoltage -0.3≤ VCM ≤ VCC +0.3V CurrentatInputPin 30 mA CurrentatOutputPin 30 mA CurrentatPower SupplyPin 50 mA OperatingTemperatureRange -55°C to+125°C StorageTemperatureRange -55°C to+150°C CLGA Lead Temperature(soldering10 sec.) +260°C ThermalResistance θJA CLGA (StillAir) 175°C/W CLGA (500LF/MinAirFlow) 115°C/W θJC CLGA 12.3°C/W Package Weight CLGA 220mg ESD Tolerance(3) 4000V (1) AbsoluteMaximum Ratingsindicatelimitsbeyond whichdamage tothedevicemay occur.OperatingRatingsindicateconditionsfor whichthedeviceisfunctional,butdo notensurespecificperformancelimits.Forensuredspecificationsand testconditions,see the ElectricalCharacteristics.The ensuredspecificationsapplyonlyforthetestconditionslisted.Some performancecharacteristicsmay degradewhen thedeviceisnotoperatedunderthelistedtestconditions. (2) The maximum power dissipationmust be deratedatelevatedtemperaturesand isdictatedby TJmax (maximum junctiontemperature), θJA (packagejunctiontoambientthermalresistance),and TA (ambienttemperature).The maximum allowablepower dissipationatany temperatureisPDmax = (TJmax -TA)/θJA orthenumber givenintheAbsoluteMaximum Ratings,whicheverislower. (3) Human body model,1.5kΩ inserieswith100 pF. QualityConformance Inspection Table1.Mil-Std-883,Method 5005 -Group A Subgroup Description Temp (°C)

1 Statictestsat +25

2 Statictestsat +125

3 Statictestsat -55

4 Dynamic testsat +25

5 Dynamic testsat +125

6 Dynamic testsat -55

7 Functionaltestsat +25

9 Switchingtestsat +25

10 Switchingtestsat +125

11 Switchingtestsat -55

12 Settingtimeat +25

13 Settingtimeat +125

14 Settingtimeat -55

2 SubmitDocumentationFeedback Copyright© 2007–2013,Texas InstrumentsIncorporated

ProductFolderLinks:LMP2012QML

www.ti.com SNOSAU5H –MARCH 2007–REVISED APRIL 2013 LMP2012 ElectricalCharacteristics2.7VDC Parameters The followingconditionsapply,unlessotherwisespecified. V+ = 2.7V,V-= 0V,V CM = 1.35V,VO = 1.35Vand R L > 1 M Ω. Sub-Symbol Parameter Conditions Notes Typ (1) Min Max Units groups VIO 0.8 36 1 InputOffsetVoltage μV 60 2,3 0.5 10 1 OffsetCalibrationTime ms 12 2,3 TCV IO InputOffsetVoltage 0.015 µV/°C(TemperatureSensitivity) IIB InputBiasCurrent −3 pA IIO InputOffsetCurrent 6 pA CMRR Common Mode RejectionRatio −0.3≤ VCM ≤ 0.9V 130 95 1 dB 0 ≤ VCM ≤ 0.9V 90 2,3 PSRR Power SupplyRejectionRatio 120 95 1 dB 90 2,3 AVOL Open Loop VoltageGain 130 95 1 R L = 10 kΩ 90 2,3 dB 124 90 1 R L = 2 kΩ 85 2,3 VO OutputSwing 2.68 2.64 1 0.075 2,3 2.65 2.615 1 0.105 2,3 IO OutputCurrent 12 5 1Sourcing,VO = 0V VIN(diff)= ±0.5V 3 2,3 mA 18 5 1Sinking,VO = 5V VIN(diff)= ±0.5V 3 2,3 IS 0.919 1.20 1 SupplyCurrentperChannel mA 1.50 2,3 (1) Typicalvaluesrepresentthemost likelyparametricnorm. Copyright© 2007–2013,Texas InstrumentsIncorporated SubmitDocumentationFeedback 3 ProductFolderLinks:LMP2012QML

SNOSAU5H –MARCH 2007–REVISED APRIL 2013 www.ti.com LMP2012 ElectricalCharacteristics2.7VAC Parameters The followingconditionsapply,unlessotherwisespecified. V+ = 2.7V,V -= 0V,VCM = 1.35V,VO = 1.35V,and R L > 1 M Ω. Sub-Symbol Parameter Conditions Notes Typ (1) Min Max Units groups GBW Gain-BandwidthProduct 3 1 5 MHz 4 SR Slew Rate 4 V/μs θm Phase Margin 60 Deg G m Gain Margin −14 dB en Input-ReferredVoltageNoise 35 nV/√Hz enP-P Input-ReferredVoltageNoise R S = 100Ω,DC to10 Hz 850 nVPP trec InputOverloadRecoveryTime 50 ms (1) Typicalvaluesrepresentthemost likelyparametricnorm. LMP2012 ElectricalCharacteristics2.7VDC Parameters – 50 krad(Si)Post RadiationLimits@ +25°C (1) The followingconditionsapply,unlessotherwisespecified. V+ = 2.7V,V -= 0V,VCM = 1.35V,VO = 1.35V,and R L > 1 M Ω. Sub-Symbol Parameter Conditions Notes Typ Min Max Units groups IS SupplyCurrentperChannel 1.75 mA 1 (1) Pre and postirradiationlimitsareidenticaltothoselistedunderDC Parameters,exceptthoselistedinthePostRadiationLimittables. LMP2012 ElectricalCharacteristics2.7VOperatingLifeTestDeltaParameters TA = +25°C Thisisworstcase drift,deltasareperformedatroom temperaturepostoperationlife.Allotherparameters,no deltasrequired. Symbol Parameter Conditions Limit Units VIO Inputoffsetvoltage 2.7V ±2 μV

4 SubmitDocumentationFeedback Copyright© 2007–2013,Texas InstrumentsIncorporated

ProductFolderLinks:LMP2012QML

www.ti.com SNOSAU5H –MARCH 2007–REVISED APRIL 2013 LMP2012 ElectricalCharacteristics5V DC Parameters The followingconditionsapply,unlessotherwisespecified. V+ = 5V,V-= 0V,V CM = 2.5V,VO = 2.5Vand R L > 1M Ω. Sub-Symbol Parameter Conditions Notes Typ (1) Min Max Units groups VIO InputOffsetVoltage 0.12 36 1 μV 60 2,3 OffsetCalibrationTime 0.5 10 1 ms 12 2,3 TCV IO InputOffsetVoltage 0.015 µV/°C(TemperatureSensitivity) IIB InputBiasCurrent −3 pA IIO InputOffsetCurrent 6 pA CMRR Common Mode RejectionRatio −0.3≤ VCM ≤ 3.2 130 100 1 dB 0 ≤ VCM ≤ 3.2 90 2,3 PSRR Power SupplyRejectionRatio 120 95 1 dB 90 2,3 AVOL Open Loop VoltageGain R L = 10 kΩ 130 105 1 100 2,3 dB R L = 2 kΩ 132 95 1 90 2,3 VO OutputSwing R L = 10 kΩ to2.5V 4.978 4.92 1 VIN(diff)= ±0.5V 4.91 2,3 V 0.040 0.080 1 0.095 2,3 R L = 2 kΩ to2.5V 4.919 4.875 1 VIN(diff)= ±0.5V 4.855 2,3 V 0.091 0.125 1 0.150 2,3 IO OutputCurrent Sourcing,VO = 0V 15 8 1 VIN(diff)= ±0.5V 6 2,3 mA Sourcing,VO = 5V 17 8 1 VIN(diff)= ±0.5V 6 2,3 IS SupplyCurrentperChannel 0.930 1.20 1 mA 1.50 2,3 (1) Typicalvaluesrepresentthemost likelyparametricnorm. Copyright© 2007–2013,Texas InstrumentsIncorporated SubmitDocumentationFeedback 5 ProductFolderLinks:LMP2012QML

SNOSAU5H –MARCH 2007–REVISED APRIL 2013 www.ti.com LMP2012 ElectricalCharacteristics5V AC Parameters The followingconditionsapply,unlessotherwisespecified. V+ = 5V,V -= 0V,VCM = 2.5V,VO = 2.5V,and R L > 1 M Ω. Sub-Symbol Parameter Conditions Notes Typ (1) Min Max Units groups GBW Gain-BandwidthProduct 3 1 5 MHz 4 SR Slew Rate 4 V/μs θm Phase Margin 60 Deg G m Gain Margin −15 dB en Input-ReferredVoltageNoise 35 nV/√Hz enP-P Input-ReferredVoltageNoise R S = 100Ω,DC to10 Hz 850 nVPP trec InputOverloadRecoveryTime 50 ms (1) Typicalvaluesrepresentthemost likelyparametricnorm. LMP2012 ElectricalCharacteristics5V DC Parameters – 50 krad(Si)Post RadiationLimits@ +25°C (1) The followingconditionsapply,unlessotherwisespecified. V+ = 5V,V -= 0V,VCM = 2.5V,VO = 2.5V,and R L > 1 M Ω. Sub-Symbol Parameter Conditions Notes Typ Min Max Units groups IS SupplyCurrentperChannel 1.75 mA 1 (1) Pre and postirradiationlimitsareidenticaltothoselistedunderDC Parameters,exceptthoselistedinthePostRadiationLimittables. LMP2012 ElectricalCharacteristics5V OperatingLifeTestDeltaParameters TA = +25°C Thisisworstcase drift,deltasareperformedatroom temperaturepostoperationlife.Allotherparameters,no deltasrequired. Symbol Parameter Conditions Limit Units VIO Inputoffsetvoltage 5.0V ±2 μV

6 SubmitDocumentationFeedback Copyright© 2007–2013,Texas InstrumentsIncorporated

ProductFolderLinks:LMP2012QML

www.ti.com SNOSAU5H –MARCH 2007–REVISED APRIL 2013

APPLICATION INFORMATION

THE BENEFITS OF LMP2012 NO 1/fNOISE Using patentedmethods,the LMP2012 eliminatesthe 1/fnoisepresentinotheramplifiers.That noise,which increasesas frequencydecreases,isa major sourceof measurement errorinallDC-coupled measurements. Low-frequencynoiseappearsas a constantly-changingsignalinserieswithany measurement beingmade. As a result,even when themeasurement ismade rapidly,thisconstantly-changingnoisesignalwillcorrupttheresult. The valueofthisnoisesignalcan be surprisinglylarge.For example:Ifa conventionalamplifierhas a flat-band noiselevelof10nV/√Hz and a noisecornerof10 Hz, theRMS noiseat0.001Hz is1µV/√Hz. Thisisequivalent toa 0.50µV peak-to-peakerror,inthefrequencyrange0.001Hz to1.0Hz. Ina circuitwitha gainof1000,this producesa 0.50mV peak-to-peakoutputerror.Thisnumber of0.001Hz mightappear unreasonablylow,but when a dataacquisitionsystem isoperatingfor17 minutes,ithas been on longenough toincludethiserror.In thissame time,theLMP2012 willonlyhave a 0.21mV outputerror.Thisissmallerby 2.4x.Keep inmind that this1/ferrorgetseven largerat lowerfrequencies.At the extreme,many peopletryto reduce thiserrorby integratingortakingseveralsamples ofthesame signal.Thisisalsodoomed tofailurebecause the1/fnatureof thisnoisemeans thattakinglongersamplesjustmoves themeasurement intolowerfrequencieswhere thenoise leveliseven higher. The LMP2012 eliminatesthissourceof error.The noiselevelisconstantwithfrequencyso thatreducingthe bandwidthreducestheerrorscaused by noise. OVERLOAD RECOVERY The LMP2012 recoversfrom inputoverloadmuch fasterthanmost chopper-stabilizedop amps. Recovery from drivingtheamplifierto2X thefullscaleoutput,onlyrequiresabout40 ms. Many chopper-stabilizedamplifierswill takefrom 250 ms toseveralseconds torecoverfrom thissame overload.Thisisbecause largecapacitorsare used tostoretheunadjustedoffsetvoltage. Figure2. The wide bandwidthoftheLMP2012 enhances performancewhen itisused as an amplifiertodriveloadsthat injecttransientsback intotheoutput.ADCs (Analog-to-DigitalConverters)and multiplexersareexamples ofthis typeofload.To simulatethistypeofload,a pulsegeneratorproducinga 1V peak squarewave was connected totheoutputthrougha 10 pF capacitor.See Figure2.The typicaltimefortheoutputtorecoverto1% ofthe appliedpulseis80 ns.To recoverto0.1% requires860ns.Thisrapidrecoveryisdue tothewide bandwidthof theoutputstageand largetotalGBW. NO EXTERNAL CAPACITORS REQUIRED The LMP2012 does notneed externalcapacitors.Thiseliminatestheproblemscaused by capacitorleakageand dielectricabsorption,which can cause delaysof severalseconds from turn-onuntilthe amplifier'serrorhas settled. MORE BENEFITS The LMP2012 offersthebenefitsmentionedabove and more.Ithas a rail-to-railoutputand consumes only950 µA of supplycurrentwhileprovidingexcellentDC and AC electricalperformance.In DC performance,the LMP2012 achieves130 dB ofCMRR, 120 dB ofPSRR and 130 dB ofopen loopgain.InAC performance,the LMP2012 provides3 MHz ofgain-bandwidthproductand 4 V/µs ofslewrate. Copyright© 2007–2013,Texas InstrumentsIncorporated SubmitDocumentationFeedback 7 ProductFolderLinks:LMP2012QML

0.1 100 100k 100 1000 10000 1k10 1M FREQUENCY (Hz) 10k1 VOLTAGE NOISE (nV/ Hz) VS = 5V LMP2012QML SNOSAU5H –MARCH 2007–REVISED APRIL 2013 www.ti.com HOW THE LMP2012 WORKS The LMP2012 uses new, patentedtechniquesto achievethe high DC accuracytraditionallyassociatedwith chopper-stabilizedamplifierswithoutthe major drawbacks produced by chopping.The LMP2012 continuously monitorsthe inputoffsetand correctsthiserror.The conventionalchoppingprocessproduces many mixing products,bothsums and differences,between thechoppingfrequencyand theincomingsignalfrequency.This mixingcauses largeamounts of distortion,particularlywhen the signalfrequencyapproaches the chopping frequency.Even withoutan incomingsignal,thechopperharmonicsmix witheach othertoproduceeven more trash.Ifthissounds unlikelyor difficultto understand,lookat the plotinFigure3, of the outputof a typical (MAX432) chopper-stabilizedop amp. Thisistheoutputwhen thereisno incomingsignal,justtheamplifierina gainof-10withtheinputgrounded.The chopperisoperatingatabout150 Hz; therestismixingproducts.Add an inputsignaland thenoisegetsmuch worse.Compare thisplotwithFigure4 oftheLMP2012. Thisdatawas takenundertheexactsame conditions.The auto-zeroactionisvisibleatabout30 kHz butnotetheabsence of mixingproductsatotherfrequencies.As a result,theLMP2012 has verylow distortionof0.02% and verylow mixingproducts. Figure3. Figure4. INPUT CURRENTS The LMP2012's inputcurrentsaredifferentthanstandardbipolarorCMOS inputcurrentsinthatitappearsas a currentflowingin one inputand out the other.Under most operatingconditions,these currentsare in the picoamp leveland willhave littleorno effectinmost circuits.These currentstendtoincreaseslightlywhen the common-mode voltageisneartheminus supply.At hightemperatures,theinputcurrentsbecome larger,0.5nA typical,and are both positiveexceptwhen the VCM isnear V−. Ifoperationisexpectedat low common-mode voltagesand hightemperature,do notadd resistanceinserieswiththeinputstobalancetheimpedances.Doing thiscan cause an increasein offsetvoltage.A smallresistancesuch as 1 kΩ can providesome protection againstverylargetransientsoroverloads,and willnotincreasetheoffsetsignificantly.

8 SubmitDocumentationFeedback Copyright© 2007–2013,Texas InstrumentsIncorporated

ProductFolderLinks:LMP2012QML

0.01 PF 1N4733A (5.1V) R7, 3.9k LMP201X U1 LM6171 R5, 1M (+2.5V) Output +15V 3.9k 20k C3 0.01 PF +15V -15V Input VOUT R1 R2 R2 R1 20: LMP2012QML www.ti.com SNOSAU5H –MARCH 2007–REVISED APRIL 2013 PRECISION STRAIN-GAUGE AMPLIFIER ThisStrain-Gaugeamplifier(Figure5) provideshighgain(1006 or ~60 dB) withverylow offsetand drift.Using the resistors'tolerancesas shown, the worstcase CMRR willbe greaterthan 108 dB. The CMRR isdirectly relatedto the resistormismatch.The rejectionof common-mode error,at the output,isindependentof the differentialgain,whichissetby R3. The CMRR isfurtherimproved,iftheresistorratiomatchingisimproved,by specifyingtighter-toleranceresistors,orby trimming. Figure5. ExtendingSupply Voltagesand Output Swing by Using a Composite AmplifierConfiguration: Incases where substantiallyhigheroutputswing isrequiredwithhighersupplyvoltages,arrangementslikethe ones shown inFigure6 and Figure7 couldbe used.These configurationsutilizetheexcellentDC performance oftheLMP2012 whileatthesame timeallowthesuperiorvoltageand frequencycapabilitiesoftheLM6171 to setthedynamic performanceoftheoverallamplifier.For example,itispossibletoachieve±12V outputswing with300 MHz ofoverallGBW (AV = 100) whilekeepingtheworstcase outputshiftdue toVOS lessthan4 mV. The LMP2012 outputvoltageiskeptataboutmid-pointofitsoverallsupplyvoltage,and itsinputcommon mode voltagerange allowsthe V- terminalto be grounded inone case (Figure6, invertingoperation)and tiedto a smallnon-criticalnegativebiasinanother(Figure7,non-invertingoperation).Higherclosed-loopgainsarealso possiblewitha correspondingreductioninrealizablebandwidth.Table 2 shows some otherclosedloopgain possibilitiesalongwiththemeasured performanceineach case. Figure6. Copyright© 2007–2013,Texas InstrumentsIncorporated SubmitDocumentationFeedback 9 ProductFolderLinks:LMP2012QML

+Input -Input (0V to 5V Range) 430: LM9140-2.5 +2.5V +5V ADC1203X +V REF GND -VREF VIN +5V 0.01 PF 1N4731A (4.3V) Input -15V 10k (-0.7V) R7, 3.9k LMP201X U1 LM6171 R5, 1M (+2.5V) Output 0.01 PF +15V 3.9k 20kD2 1N4148 0.01 PF +15V LMP2012QML SNOSAU5H –MARCH 2007–REVISED APRIL 2013 www.ti.com Table2.Composite AmplifierMeasured Performance AV R1 R2 C2 BW SR en p-p Ω Ω pF MHz (V/μs) (mV PP ) 50 200 10k 8 3.3 178 37 100 100 10k 10 2.5 174 70 100 1k 100k 0.67 3.1 170 70 500 200 100k 1.75 1.4 96 250 1000 100 100k 2.2 0.98 64 400 In terms of the measured outputpeak-to-peaknoise,the followingrelationshipholdsbetween outputnoise voltage,en p-p,fordifferentclosed-loopgain,AV,settings,where −3 dB BandwidthisBW: Figure7. Itshouldbe keptinmind thatinordertominimizetheoutputnoisevoltagefora givenclosed-loopgainsetting, one couldminimizethe overallbandwidth.As can be seen from Equation1 above, the outputnoisehas a square-rootrelationshiptotheBandwidth. In the case of the invertingconfiguration,itisalsopossibleto increasethe inputimpedance of the overall amplifier,by raisingthevalueofR1, withouthavingtoincreasethefeed-backresistor,R2, toimpracticalvalues, by utilizinga "Tee"networkas feedback.See the LMC6442 data sheet(ApplicationNotes section)formore detailson this. Figure8.

10 SubmitDocumentationFeedback Copyright© 2007–2013,Texas InstrumentsIncorporated

ProductFolderLinks:LMP2012QML

www.ti.com SNOSAU5H –MARCH 2007–REVISED APRIL 2013 LMP2012 AS ADC INPUT AMPLIFIER The LMP2012 isa greatchoiceforan amplifierstageimmediatelybeforetheinputofan ADC (Analog-to-Digital Converter),whetherAC or DC coupled.See Figure8 and Figure9.Thisisbecause ofthefollowingimportant characteristics: A) Verylowoffsetvoltageand offsetvoltagedriftovertimeand temperatureallowa highclosed-loopgain settingwithoutintroducingany short-termorlong-termerrors.Forexample,when settoa closed-loopgain of100 as theanaloginputamplifierfora 12-bitA/D converter,theoverallconversionerroroverfull operationtemperatureand 30 yearslifeofthepart(operatingat50°C) wouldbe lessthan5 LSBs. B) Fastlarge-signalsettlingtimeto0.01% offinalvalue(1.4μs)allows12 bitaccuracyat100 KH Z ormore samplingrate. C) No flicker(1/f)noisemeans unsurpasseddataaccuracyoverany measurement periodoftime,no matter how long.Considerthefollowingop amp performance,based on a typicallow-noise,high-performance commercially-availabledevice,forcomparison: Op amp flatbandnoise= 8nV/√Hz 1/fcornerfrequency= 100 Hz AV = 2000 Measurement time= 100 sec Bandwidth= 2 Hz Thisexample willresultinabout2.2mV PP (1.9LSB) ofoutputnoisecontributiondue totheop amp alone, compared toabout594 μVPP (lessthan0.5LSB) when thatop amp isreplacedwiththeLMP2012 which has no 1/fcontribution.Ifthemeasurement timeisincreasedfrom100 secondsto1 hour,the improvementrealizedby usingtheLMP2012 wouldbe a factorofabout4.8times(2.86mV PP compared to 596 μV when LMP2012 isused)mainlybecause theLMP2012 accuracyisnotcompromised by increasing theobservationtime. D) Rail-to-RailoutputswingmaximizestheADC dynamicrangein5-Voltsingle-supplyconverterapplications. Below aresome typicalblockdiagramsshowingtheLMP2012 used as an ADC amplifier(Figure8 and Figure9). Figure9. RADIATION ENVIRONMENTS Carefulconsiderationshould be given to environmentalconditionswhen using a productin a radiation environment. TOTAL IONIZING DOSE Radiationhardness assured (RHA) productsare those partnumbers witha totalionizingdose (TID)level specifiedintheOrderingInformationtableon thefrontpage.Testingand qualificationoftheseproductsisdone on a wafer levelaccordingto MIL-STD-883G, Test Method 1019.7,ConditionA and the “Extended room temperatureanneal test” describedin section3.11 forapplicationenvironmentdose rateslessthan 0.082 rad(Si)/s.Wafer levelTID dataareavailablewithlotshipments. Copyright© 2007–2013,Texas InstrumentsIncorporated SubmitDocumentationFeedback 11 ProductFolderLinks:LMP2012QML

SNOSAU5H –MARCH 2007–REVISED APRIL 2013 www.ti.com ELDRS-FREE PRODUCTS ELDRS-Free productsare testedand qualifiedon a waferlevelbasisata dose rateof10 mrad(Si)/sper MIL- STD-883G, Test Method 1019.7,ConditionD. Wafer levellow dose ratetestdata are availablewith lot shipments. SINGLE EVENT UPSET A reporton singleeventupset(SEU) isavailableupon request. RevisionHistory Date Released Revision Section Changes 03/19/07 A InitialRelease InitialRelease 10/17/08 B ElectricalSection Added typicalparametersto2.7Vand 5V AC ElectricalSections.RevisionA willbe Archived. 07/13/09 C 2.7VDC and 5V DC ElectricalSection Added typicalparameterTCV OS to2.7VDC and 5V DC ElectricalSection.RevisionB willbe Archived. 12/08/09 D Features,OrderingInformationand Notes ReferencetoELDRS, New ELDRS partnumber and added ELDRS Note 6.RevisionC willbe Archived. 06/08/2010 E GeneralDescription,2.7VDC and 5V DC Removed firstline.Added DeltaTabletoElectrical's ElectricalSectionadded New Radiation tomatch what isintheSMD and New Radiation Section. Section.RevisionD willbe Archived. 11/30/2010 F AC Electrical5V parametertableconditions Correcttypotounlessotherwisespecifiedparameters From:V+ = 2.7V,V -= 0V,VCM = 1.35V,VO = 1.35V, and R L > 1 M Ω.To:V+ = 5V,V -= 0V,VCM = 2.5V,VO = 2.5V,and R L > 1 M Ω.RevisionE willbe Archived. 04/02/2013 H All Changed layoutofNationalData SheettoTIformat

12 SubmitDocumentationFeedback Copyright© 2007–2013,Texas InstrumentsIncorporated

ProductFolderLinks:LMP2012QML

Texas InstrumentsIncorporatedand itssubsidiaries(TI)reservetherighttomake corrections,enhancements,improvementsand other changes toitssemiconductorproductsand servicesperJESD46, latestissue,and todiscontinueany productorserviceperJESD48, latest issue.Buyersshouldobtainthelatestrelevantinformationbeforeplacingordersand shouldverifythatsuch informationiscurrentand complete.Allsemiconductorproducts(alsoreferredtohereinas “components”)aresoldsubjecttoTI’s termsand conditionsofsale suppliedatthetimeoforderacknowledgment. TIwarrantsperformanceofitscomponents tothespecificationsapplicableatthetimeofsale,inaccordancewiththewarrantyinTI’s terms and conditionsofsaleofsemiconductorproducts.Testingand otherqualitycontroltechniquesareused totheextentTIdeems necessary tosupportthiswarranty.Exceptwhere mandated by applicablelaw,testingofallparametersofeach component isnotnecessarily performed. TIassumes no liabilityforapplicationsassistanceorthedesignofBuyers’products.Buyersareresponsiblefortheirproductsand applicationsusingTIcomponents.To minimizetherisksassociatedwithBuyers’productsand applications,Buyersshouldprovide adequatedesignand operatingsafeguards. TIdoes notwarrantorrepresentthatany license,eitherexpressorimplied,isgrantedunderany patentright,copyright,mask work right,or otherintellectualpropertyrightrelatingtoany combination,machine,orprocessinwhichTIcomponents orservicesareused.Information publishedby TIregardingthird-partyproductsorservicesdoes notconstitutea licensetouse such productsorservicesora warrantyor endorsementthereof.Use ofsuch informationmay requirea licensefroma thirdpartyunderthepatentsorotherintellectualpropertyofthe thirdparty,ora licensefromTIunderthepatentsorotherintellectualpropertyofTI. ReproductionofsignificantportionsofTIinformationinTIdatabooks ordatasheetsispermissibleonlyifreproductioniswithoutalteration and isaccompaniedby allassociatedwarranties,conditions,limitations,and notices.TIisnotresponsibleorliableforsuch altered documentation.Informationofthirdpartiesmay be subjecttoadditionalrestrictions. ResaleofTIcomponents orserviceswithstatementsdifferentfromorbeyond theparametersstatedby TIforthatcomponent orservice voidsallexpressand any impliedwarrantiesfortheassociatedTIcomponent orserviceand isan unfairand deceptivebusinesspractice. TIisnotresponsibleorliableforany such statements. Buyeracknowledgesand agreesthatitissolelyresponsibleforcompliancewithalllegal,regulatoryand safety-relatedrequirements concerningitsproducts,and any use ofTIcomponents initsapplications,notwithstandingany applications-relatedinformationorsupport thatmay be providedby TI.Buyerrepresentsand agreesthatithas allthenecessaryexpertisetocreateand implementsafeguardswhich anticipatedangerousconsequencesoffailures,monitorfailuresand theirconsequences,lessenthelikelihoodoffailuresthatmightcause harm and takeappropriateremedialactions.BuyerwillfullyindemnifyTIand itsrepresentativesagainstany damages arisingoutoftheuse ofany TIcomponents insafety-criticalapplications. Insome cases,TIcomponents may be promotedspecificallytofacilitatesafety-relatedapplications.Withsuch components,TI’s goalisto helpenablecustomerstodesignand createtheirown end-productsolutionsthatmeet applicablefunctionalsafetystandardsand requirements.Nonetheless,such components aresubjecttotheseterms. No TIcomponents areauthorizedforuse inFDA ClassIII(orsimilarlife-criticalmedicalequipment)unlessauthorizedofficersoftheparties have executeda specialagreementspecificallygoverningsuch use. OnlythoseTIcomponents whichTIhas specificallydesignatedas militarygradeor“enhanced plastic”aredesignedand intendedforuse in military/aerospaceapplicationsorenvironments.Buyeracknowledgesand agreesthatany militaryoraerospaceuse ofTIcomponents whichhave not been so designatedissolelyattheBuyer's risk,and thatBuyerissolelyresponsibleforcompliancewithalllegaland regulatoryrequirementsinconnectionwithsuch use. TIhas specificallydesignatedcertaincomponents as meetingISO/TS16949 requirements,mainlyforautomotiveuse.Inany case ofuse of non-designatedproducts,TIwillnotbe responsibleforany failuretomeet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotiveand Transportationwww.ti.com/automotive Amplifiers amplifier.ti.com Communicationsand Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP ® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energyand Lighting www.ti.com/energy Clocksand Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space,Avionicsand Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Videoand Imaging www.ti.com/video RFID www.ti-rfid.com OMAP ApplicationsProcessors www.ti.com/omap TIE2E Community e2e.ti.com WirelessConnectivity www.ti.com/wirelessconnectivity MailingAddress:Texas Instruments,PostOfficeBox 655303,Dallas,Texas 75265 Copyright© 2013,Texas InstrumentsIncorporated