LML6-LV-CW-SP DIALIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
pFully modular linear arrays of ultra high brightness LEDs pUtilizes the latest 100+ lumen LUXEON ® Rebel™ LEDs for cool white, 100+ lumen for neutral white & 50+ lumen for warm white pOnboard 350mA constant current driver runs off low voltage input pETL listed to UL2108 standards pChoice of colour temperatures & optical patterns p>70% lumen maintenance @ 50,000 hours at max acceptable ambient temperature pPrimary heatsinking included pColor binned for consistent color pOperating Ambient temperature -30ºC to +55ºC pOnboard driver model operates off 12-24VDC / 11-17VAC input pMax modules per run = 10 @ 12VAC, 16 @ 24VDC input pTypical power consumption 8.0W per module pAdditional heatsinking required for optimal performance pCurrent draw 580mA @ 12VDC input* 290mA @ 24VDC input* PWM SERIES LV LINEAR MODULES APPLICATION pLinear lighting p Accent lighting p Flood lighting p Street & area lighting p General illumination MATERIALS / FINISH p Six premium LUXEON Rebel LEDs per module p Anodized cast aluminum heatsink p Dialight-Lumidrives optics (OPC 11 Series) p Onboard 350mA constant current driver p Required Entry Cable, Power Supply to 1st module (sold seperately): LML6-LV-CON-CAB
ORDERING INFORMATION
LML6-LV-CON-CAB (sold separately) Entry cable, power supply to 1st module LML6-LV-M2M-CAB (ships w/ 1 in box) Connection cable (module to module) * Cables use AWG 20 wires Connectors *All angles are half divergence CW = 5000K - 6350K NW = 3800K - 4100K WW = 2850K - 3250K Typical Colour (AA) Temperature SP = 5 degree spot MD = 8 degree med. WD = 20 degree wide OV = 5X25 degree oval FR = 7 degree frosted spot Optic (BB) *Note:- 750mA per unit required for initial start-up www.dialight.com
IES 32 files available, consult factory ASSEMBLY INFORMATION 1) Remove cover from module (Do not remove mask) 2) Connect LML6-LV-M2M-CAB quick connect cables between modules as indicated in the photo. If desired, insert 8/32 or M6 mounting screws in holes provided. 3) Wire between cables may be routed through end as indicated in photo or around side of module. 4) Connect LML6-LV-CON-CAB into front of first module. 5) Replace cover. 6) Connect leads on LML6-LV-CON-CAB to low voltage power supply. Red wire to +, black wire to - (297.18mm x 38.05mm x 14.86mm) Mounting hole spacing = 3.22” [81.8mm]. Max screw size #8 Total length for “Z” units connected end to end = (Z x 11.7) - ((Z-1) x 0.25) (inches) Example: 2 units total length = 23.15” [588.01] Top View Side View MECHANICAL DIMENSIONS www.dialight.com Dialight reserves the right to make changes at any time in order to supply the best product possible. The most current version of this document will always be available at: www.dialight.com/Assets\\Brochures_And_Catalogs\\Illumination\\MDEXLUMPWMLV .pdf MDEXLUMPWMLV_C