LME12W SUNLED | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
z LOW POWER CONSUMPTION. z POPULAR T-1 3/4 DIAMETER PACKAGE. z GENERAL PURPOSE LEADS. z RELIABLE AND RUGGED. z LONG LIFE - SOLID STATE RELIABILITY. z AVAILABLE ON TAPE AND REEL. z RoHS COMPLIANT. Part Number Emitting Color Emitting Material Lens-color Luminous Intensity (IF=20mA) mcd Wavelength nm λ P min. typ. LME12W Red InGaAlP Water Clear 1500 4990 630 20° Viewing Angle 2θ 1/2 Absolute maximum ratings (TA=25°C) ME (InGaAlP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width i FS 195 mA Power Dissipation PT 75 mW Operating Temperature TA -40 ~ +85 Storage Temperature Tstg -40 ~ +85 Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds ME (InGaAlP) Unit Forward Voltage (Typ.) (IF=20mA) VF 2.0 V Forward Voltage (Max.) (IF=20mA) VF 2.5 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emis- sion (Typ.) (IF=20mA) λ p 630 nm Wavelength of Dominant Emission (Typ.) (IF=20mA) λ D 621 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 20 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 25 pF Operating Characteristics (TA=25°C) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice.
www.SunLED.com Part Number: LME12W T-1 3/4 (5mm) SOLID STATE LAMP Published Date : MAR 26, 2008 Drawing No : SDSA3585 V7 Checked : B.L.LIU P.2/4 ME
www.SunLED.com Part Number: LME12W T-1 3/4 (5mm) SOLID STATE LAMP Published Date : MAR 26, 2008 Drawing No : SDSA3585 V7 Checked : B.L.LIU P.3/4 Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters.
www.SunLED.com Part Number: LME12W T-1 3/4 (5mm) SOLID STATE LAMP Published Date : MAR 26, 2008 Drawing No : SDSA3585 V7 Checked : B.L.LIU P.4/4 PACKING & LABEL SPECIFICATIONS LME12W