K50_V10 BANNER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Daylight-visible, general-purpose indicators for indoor or outdoor use
- Intense levels of light output for areas with high ambient light - even outdoors
- Viewable around entire perimeter; strobing models also emit light from top
- Rotating and strobing models
- Rugged, sealed thermoplastic housing rated for IP67 and IP69K per DIN 40050-9
- Bright, even light
- 12 V dc to 30 V dc operation
- 12 V dc operation useful for applications on mobile vehicles WARNING: Not To Be Used for Personnel Protection Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Models Model 1 Function Connection LED Color Input Voltage K50BLR1XGXPQ Rotating Integral 5-pin M12/Euro-style quick disconnect Green 12 to 30 V dc K50BLR1XRXPQ Red K50BLR1XYXPQ Yellow K50BLR1XBXPQ Blue K50BCLS1XGXPQ Strobing Green K50BCLS1XRXPQ Red K50BCLS1XYXPQ Yellow K50BCLS1XBXPQ Blue Wiring Wire Color Function for Rotating Models Function for Strobing Models Blue (3) 0 V dc Common Common Black (4) +V dc ON continuous ON continuous Brown (1) +V dc Rotating at 90 rpm Single pulse strobe at 1 Hz White (2) +V dc Rotating at 180 rpm Double pulse strobe at 1 Hz Sourcing (PNP) Input Integral 5-pin M12/Euro-style quick disconnect Wiring Key: 12–30 V dc 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray (Not Used) 1 • To order the 150 mm PVC pigtail with quick disconnect (QD) model, replace Q with QP in model number (example, K50BLR1XGXPQP).
- To order the 2 m (6.5 ft) cable model, omit suffix Q from model number (example, K50BLR1XGXP).
- Models with a QD requires a mating cable (refer to the Accessories list). EZ-LIGHT® K50 Rotating and Strobing Beacon Original Document 159966 Rev. F
4 April 2019
Figure 1. Timing diagram for 1 pulse or 2 pulses 947-5-2; 30G 11 ms duration, half sine wave. and national electrical codes and regulations. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com.
4-Pin Threaded M12/Euro-Style Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) MQDC-406 1.83 m (6 ft) Straight 44 Typ. ø 14.5 M12 x 1 1 = Brown 2 = White 3 = Blue 4 = Black MQDC-415 4.57 m (15 ft) MQDC-430 9.14 m (30 ft) MQDC-450 15.2 m (50 ft) MQDC-406RA 1.83 m (6 ft) Right-Angle 32 Typ.[1.26"] 30 Typ.[1.18"] ø 14.5 [0.57"] M12 x 1 MQDC-415RA 4.57 m (15 ft) MQDC-430RA 9.14 m (30 ft) MQDC-450RA 15.2 m (50 ft) LMB Sealed Right-Angle Bracket Model Description Construction LMB30RA Direct-Mount Models: Bracket kit with base, 30 mm adapter, set screw, fasteners, O-rings, and gaskets. Black polycarbonate LMB30RAC Gray polycarbonate LMBE12RA Pipe-Mount Models: Bracket kit with base, ½-14 pipe adapter, set screw, fasteners, O-rings, and gaskets. For use with stand-off pipe (listed and sold separately). Black polycarbonate LMBE12RAC Gray polycarbonate Mounting Brackets All measurements are listed in millimeters, unless noted otherwise. SMB30A
- Right-angle bracket with curved slot for versatile orientation
- Clearance for M6 (¼ in) hardware
- Mounting hole for 30 mm sensor
- 12-ga. stainless steel 69 AB C Hole center spacing: A to B=40 Hole size: A=ø 6.3, B= 27.1 x 6.3, C=ø 30.5 SMB30FA
- Swivel bracket with tilt and pan movement for precise adjustment
- Mounting hole for 30 mm sensor
- 12-ga. 304 stainless steel
- Easy sensor mounting to extrude rail T-slot
- Metric and inch size bolt available AB 68.936.3 83.2 Bolt thread: SMB30FA, A= 3/8 - 16 x 2 in; SMB30FAM10, A= M10 - 1.5 x 50 Hole size: B= ø 30.1 SMB30MM
- 12-ga. stainless steel bracket with curved mounting slots for versatile orientation
- Clearance for M6 (¼ in) hardware
- Mounting hole for 30 mm sensor A BC Hole center spacing: A = 51, A to B = 25.4 Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1 SMB30SC
- Swivel bracket with 30 mm mounting hole for sensor
- Black reinforced thermoplastic polyester
- Stainless steel mounting and swivel locking hardware included B A Hole center spacing: A=ø 50.8 Hole size: A=ø 7.0, B=ø 30.0 EZ-LIGHT® K50 Rotating and Strobing Beacon P/N 159966 Rev. F www.bannerengineering.com - Tel: + 1 888 373 6767 3
- Direct mounting of stand-off pipe, with common bracket type
- Zinc-plated steel
- 1/2-14 NPSM nut
- Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 35 mm Hole center spacing: 20.0 38.25 2X Ø9 1/2 - 14 NPSM NUT 5535 LMBE12RA45
- Direct mounting of stand-off pipe, with common bracket type
- Zinc-plated steel
- 1/2-14 NPSM nut
- Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 45 mm Hole center spacing: 35.0 38.25 6545 2X Ø11 1/2 - 14 NPSM NUT Elevated Mount System Model Features Components SA-M30TE12 - Black Acetal • Streamlined black acetal or white UHMW stand-off pipe adapter/cover
- Connects between 30 mm light base and ½ in. NPSM/DN15 pipe
- Mounting hardware included SA-M30TE12C - White UHMW Polished 304 Stainless Steel Black Anodized Aluminum Clear Anodized Aluminum
- Elevated-use stand-off pipe (½ in. NPSM/DN15)
- Polished 304 stainless steel, black anodized aluminum, or clear anodized aluminum surface
- ½ in. NPT thread at both ends
- Compatible with most industrial environments SOP-E12-150SS 150 mm (6 in) long SOP-E12-150A 150 mm (6 in) long SOP-E12-150AC 150 mm (6 in) long SOP-E12-300SS 300 mm (12 in) long SOP-E12-300A 300 mm (12 in) long SOP-E12-300AC 300 mm (12 in) long SOP-E12-900SS 900 mm (36 in) long SOP-E12-900A 900 mm (36 in) long SOP-E12-900AC 900 mm (36 in) long SA-E12M30 - Black Acetal • Streamlined black acetal or white UHMW mounting base adapter/cover
- Connects between ½ in. NPSM/DN15 pipe and 30 mm (1-3/16 in) drilled hole
- Mounting hardware included SA-E12M30C - White UHMW Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents. EZ-LIGHT® K50 Rotating and Strobing Beacon © Banner Engineering Corp. All rights reserved