LMB-30C PAIRUI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
www.pairuigroup.com Page: 1 / 3 Date: 01/07/2014 Constant current LED Drivers For indoor use LMB-30C Series, 30Watt FEATURES: /checkbld/checkbld /checkbld/checkbldConstant current output /checkbld/checkbld /checkbld/checkbldInput voltage range 200-240Vac /checkbld/checkbld /checkbld/checkbldShort circuit, overload over temperature protections /checkbld/checkbld /checkbld/checkbldDesigned to worldwide safety standards for lighting /checkbld/checkbld /checkbld/checkbldCooling by free air convection /checkbld/checkbld /checkbld/checkbld3 years warranty Model Input voltage (Vac) Output current (mA) Output voltage (Vdc) Output power (W) Min. Max. LMB30-C700 200-240 700 23 43 30 ELECTRICAL Input Parameters Symbols Test Conditions / Comment Min. Typ. Max. Units Input voltage Vin --- 180 -- 264 Vac Input frequency Fline --- 47 -- 63 Hz Input current Iin Full load, Vin =230Vac -- -- 0.3 A Inrush current Iinrush Cold start, Vin =230Vac -- -- 70 A Power factor PF 70%~100% load, Vin =220Vac 0.95 -- -- PF Efficiency η Full voltage, full load -- 83 85 % Output Output current Iout LMB30-C700 665 700 735 mA Output voltage Vout LMB30-C700 23 -- 43 V Line regulation Iout-line Vin from 200Vac to 240Vac -- -- 1 % Load regulation Iout-load Vout from min. To max. -- -- 5 %
www.pairuigroup.com Page: 2 / 3 Date: 01/07/2014 Constant current LED Drivers For indoor use LMB-30C Series, 30Watt ELECTRICAL Output Parameters Symbols Test Conditions / Comment Min. Typ. Max. Units Turn-on delay time Ton_delay Cold start, power on -- -- 2 S Ripple -- --- -- 600 -- mV Protection Overload Hiccup mode, it will recover automatically after f ault conditions remove Short circuit Hiccup mode, it will recover automatically af ter fault conditions remove Over temperature Protection type: shut down O/P voltage rec overs automatically after temperature goes down Environment Storage Tstorage Humidity: 5% RH to 95% RH -40 -- +80 ℃ Ambient operating temperature Ta Startup at rated voltage -20 -- +45 ℃ Maximum case temperature Tc Hot-spot on case -- -- +80 ℃ Operating relative humidity Ha Non condensing 10 -- 95 % MTBF TMTBF Full load, 220Vac input, 25 ℃ ambient temperature -- -- 30 kHrs Dimension(LxWxH) 167.9x51x24mm Safety / EMC Safety standards IEC61347-1 IEC61347-2-13 EMI IEC55015 EMS IMMUNITY IEC61547 THD IEC61000-3-2 Notes: Unless otherwise specified, all the above parameters are measured at ambient temperature of 25 ℃℃ ℃℃ and Vin = 200Vac to 240Vac.
www.pairuigroup.com Page: 3 / 3 Date: 01/07/2014 Constant current LED Drivers For indoor use LMB-30C Series, 30Watt MECHANICAL Unit: mm