LM833_05 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Low Noise Dual Operational Amplifier ■ Low voltage noise: 4.5nV/√Hz ■ High gain bandwidth product: 15MHz ■ High slew rate: 7V/µs ■ Low distortion: 0.002% ■ Excellent frequency stability ■ ESD protection 2kV

Description

The LM833 is a monolithic dual operational amplifier particularly well suited for audio applications. It offers low voltage noise (4.5nV/ √Hz) and high frequency performances (15MHz Gain Bandwidth product, 7V/µs slew rate). In addition the LM833 has also a very low distortion (0.002%) and excellent phase/gain margins. Pin Connections (top view) Order Codes N DIP8 (Plastic Package) D SO8 (Plastic Micropackage) + - Output 1 Inverting input 1 Non-inverting input 1 VCC VCC Output 2 Inverting input 2 Non-inverting input 2- Part Number Temperature Range Package Packaging Marking LM833N -40, +105°C DIP8 T ube LM833N LM833D/DT S8-8 Tube or T ape & Reel 833 LM833YD/YDT -40, +125°C SO-8 (automotive grade level) Tube or T ape & Reel 833Y

1 Absolute Maximum Ratings

Table 1. Key parameters and their absolute maximum ratings Table 2. Operating conditions

  1. Either or both input voltages must not exceed the magnitude of Vcc + or Vcc-.
  2. Power dissipation must be considered to ensure maximum junction temperature (Tj) is not exceeded.
  3. Human body model, 100pF discharged through a 1.5k Ω resistor into pin of device.
  4. Machine model ESD, a 200pF cap is charged to the specified voltage, then discharged directly into the IC with

no external series resistor (internal resistor < 5 Ω), into pin to pin of device.

2 Typical Application Schematics

Figure 1. Schematic diagram (1/2 LM833)

3 Electrical Characteristics

Table 3. V CC

4 Package Mechanical Data

In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at:

4.1 DIP-8 Package

DIM. mm. inch A 3.3 0.130 a1 0.7 0.028 B 1.39 1.65 0.055 0.065 B1 0.91 1.04 0.036 0.041 b 0.5 0.020 b1 0.38 0.5 0.015 0.020 D 9.8 0.386 E 8.8 0.346 e 2.54 0.100 e3 7.62 0.300 e4 7.62 0.300 F 7.1 0.280 I 4.8 0.189 L 3.3 0.130 Z 0.44 1.6 0.017 0.063 Plastic DIP-8 MECHANICAL DATA P001F

4.2 SO-8 Package

DIM. mm. inch A 1.35 1.75 0.053 0.069 A1 0.10 0.25 0.04 0.010 A2 1.10 1.65 0.043 0.065 B 0.33 0.51 0.013 0.020 C 0.19 0.25 0.007 0.010 D 4.80 5.00 0.189 0.197 E 3.80 4.00 0.150 0.157 e 1.27 0.050 H 5.80 6.20 0.228 0.244 h 0.25 0.50 0.010 0.020 L 0.40 1.27 0.016 0.050 k ˚ (max.) ddd 0.1 0.04 SO-8 MECHANICAL DATA 0016023/C

5 Revision History

Nov. 2001 1 Initial release. July 2005 2 1 - PP AP references inserted in the datasheet seeTable on page 1. 2 - ESD protection inserted in T able 1 on page 2 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this p ublication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicr oelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2005 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Ital y - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America