LM833 MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

/C0076/C0077/C0056/C0051/C0051 SEMICONDUCTOR TECHNICAL DATA DUAL OPERATIONAL AMPLIFIER

ORDERING INFORMATION

TA = – 40° to +85°C Plastic DIP SO–8 PIN CONNECTIONS Order this document by LM833/D D SUFFIX PLASTIC PACKAGE CASE 751 (SO–8) N SUFFIX PLASTIC PACKAGE CASE 626 (Top View) Output 1 Inputs 1 Output 2 Inputs 2 VEE VCC 1MOTOROLA ANALOG IC DEVICE DATA /C0068/C0117/C0097/C0108 /C0076/C0111/C0119 /C0078/C0111/C0105/C0115/C0101/C0044 /C0065/C0117/C0100/C0105/C0111 /C0065/C0109/C0112/C0108/C0105/C0102/C0105/C0101/C0114 The LM833 is a standard low–cost monolithic dual general–purpose operational amplifier employing Bipolar technology with innovative high–performance concepts for audio systems applications. With high frequency PNP transistors, the LM833 offers low voltage noise (4.5 nV/ Hz ), 15 MHz gain bandwidth product, 7.0 V/µs slew rate, 0.3 mV input offset voltage with 2.0µV/°C temperature coefficient of input offset voltage. The LM833 output stage exhibits no deadband crossover distortion, large output voltage swing, excellent phase and gain margins, low open loop high frequency output impedance and symmetrical source/sink AC frequency response. The LM833 is specified over the automotive temperature range and is available in the plastic DIP and SO–8 packages (P and D suffixes). For an improved performance dual/quad version, see the MC33079 family.

  • Low Voltage Noise: 4.5 nV/ Hz/C0504
  • High Gain Bandwidth Product: 15 MHz
  • High Slew Rate: 7.0 V/µs
  • Low Input Offset Voltage: 0.3 mV
  • Low T.C. of Input Offset Voltage: 2.0 µV/°C
  • Low Distortion: 0.002%
  • Excellent Frequency Stability
  • Dual Supply Operation MAXIMUM RATINGS Rating Symbol Value Unit Supply Voltage (VCC to VEE ) VS +36 V Input Differential Voltage Range (Note 1)VIDR 30 V Input Voltage Range (Note 1) VIR ±15 V Output Short Circuit Duration (Note 2) tSC Indefinite Operating Ambient Temperature Range TA –40 to +85 °C Operating Junction Temperature TJ +150 °C Storage Temperature Tstg –60 to +150 °C Maximum Power Dissipation (Notes 2 and 3)PD 500 mW NOTES: 1. Either or both input voltages must not exceed the magnitude of VCC or VEE . 2. Power dissipation must be considered to ensure maximum junction temperature (TJ) is not exceeded (see power dissipation performance characteristic). 3. Maximum value at TA ≤ 85°C.  Motorola, Inc. 1996 Rev 0

2 MOTOROLA ANALOG IC DEVICE DATA

Figure 1. Maximum Power Dissipation

4 MOTOROLA ANALOG IC DEVICE DATA

Figure 9. Gain Bandwidth Product versus Figure 11. Slew Rate versus Supply Voltage Figure 12. Output Voltage versus Frequency Figure 13. Maximum Output Voltage Figure 14. Output Saturation Voltage

6 MOTOROLA ANALOG IC DEVICE DATA

Figure 21. Inverting Amplifier Figure 22. Noninverting Amplifier Slew Rate Figure 23. Noninverting Amplifier Overshoot

7MOTOROLA ANALOG IC DEVICE DATA OUTLINE DIMENSIONS NOTES: 1. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 2. PACKAGE CONTOUR OPTIONAL (ROUND OR SQUARE CORNERS). 3. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. F NOTE 2 –A– –B– –T– SEATING PLANE H J G D K N C L M MAM0.13 (0.005) B MT DIM MIN MAX MIN MAX INCHESMILLIMETERS A 9.40 10.16 0.370 0.400 B 6.10 6.60 0.240 0.260 C 3.94 4.45 0.155 0.175 D 0.38 0.51 0.015 0.020 F 1.02 1.78 0.040 0.070 G 2.54 BSC 0.100 BSC H 0.76 1.27 0.030 0.050 J 0.20 0.30 0.008 0.012 K 2.92 3.43 0.115 0.135 L 7.62 BSC 0.300 BSC N 0.76 1.01 0.030 0.040 /C0095/C0095 D SUFFIX PLASTIC PACKAGE CASE 751–05 (SO–8) ISSUE R N SUFFIX PLASTIC PACKAGE CASE 626–05 ISSUE K SEATING PLANE A0.25 M CB SS

0.25 M B M

h /C0113 C X 45/C0095 L DIM MIN MAX MILLIMETERS A 1.35 1.75 A1 0.10 0.25 B 0.35 0.49 C 0.18 0.25 D 4.80 5.00 E

1.27 BSCe

3.80 4.00 H 5.80 6.20 h 0 7 L 0.40 1.25 /C0113 0.25 0.50 /C0095/C0095 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETERS. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE MOLD PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. D E H A B e BA1 C A 0.10

8 MOTOROLA ANALOG IC DEVICE DATA

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–54543–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315 INTERNET : http://Design–NET.com 51 Ting Kok R oad, Tai Po, N.T., Hong Kong. 852–26629298 LM833/D /C0042/C0076/C0077/C0056/C0051/C0051/C0047/C0068/C0042