LM7924CT

LM79XX ONSEMI | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 17

Technical content

To learn more about ON Semiconductor, please visit our website at www.onsemi.com Is Now Part of ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

©2011 Fairchild Semiconductor Corporation www.fairchildsemi.com Rev. 1.0.3

Features

• Output Current in Excess of 1A
• Output V oltages of -5, -6, -8 , -9, -10, -12, -15, -18 and - 24V
• Internal Thermal Overload Protection
• Short Circuit Protection
• Output Transistor Safe Operating Area Compensation

Description

The LM79XX series of three te rminal negative regulators are available in TO-220 package and with several fixed output voltages, making them useful in a wide range of applications. Each type employs internal current limiting, thermal shut down and safe operating area protection, making it essentially indestructible. TO-220 (Single Gauge) 1. GND 2. Input 3. Output Vin Internal Block Digram VOLTAGE REFERENCE PROTECTION CIRCUITRY Rsc GND I1 I2 Out In Output Input LM79XX 3-Terminal 1A Negative Voltage Regulator

Note: 1. Thermal resistance test board Size: 76.2mm * 114.3mm * 1.6mm(1S0P) JEDEC standard: JESD51-3, JESD51-7 2. Assume no ambient airflow (VI = -10V, IO = 500mA, 0°C ≤TJ ≤ +125°C, CI =2.2μF, CO =1μF, unless otherwise specified.) Note 3. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Parameter Symbol Value Unit Input Voltage V I -35 V Thermal Resistance Junction-Case (Note1) R θJC 5 °C/W Thermal Resistance Junction-Air (Note1, 2) R θJA 65 Operating Temperature Range T OPR 0 ~ +125 °C Storage Temperature Range T STG -65 ~ +150 °C Parameter Symbol Conditions Min. Typ. Max. Unit Output Voltage V O VIO = 5mA to 1A, PO ≤ 15W Line Regulation (Note3) ΔVO TJ = +25°C VI = -7V to -25V - 35 100 mV VI = -8V to -12V - 8 50 Load Regulation (Note3) ΔVO TJ = +25°C IO = 5mA to 1.5A -1 0 1 0 0 mV TJ =+25°C IO = 250mA to 750mA -3 5 0 Quiescent Current I Q TJ =+25°C- 3 6 m A Quiescent Current Change ΔIQ IO = 5mA to 1A - 0.05 0.5 mA VI = -8V to -25V - 0.1 0.8 Temperature Coefficient of VD ΔVo/ΔTI O = 5mA - - 0.4 - mV/ °C Output Noise Voltage V N f = 10Hz to 100kHz TA =+25°C -4 0 - μV Ripple Rejection RR f = 120Hz ΔVI = 10V 54 60 - dB Dropout Voltage V D TJ = +25°C IO = 1A -2 - V Short Circuit Current I SC TJ =+25°C, VI = -35V - 300 - mA Peak Current I PK TJ =+25°C- 2 . 2 - A

(VI = -11V, IO = 500mA, 0°C ≤TJ ≤ +125°C, CI =2.2μF, CO =1μF, unless otherwise specified.) Note 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Parameter Symbol Conditions Min. Typ. Max. Unit Output Voltage V O VIO = 5mA to 1A, PO ≤ 15W Line Regulation (Note1) ΔVO TJ = +25°C VI = -8V to -25V - 10 120 mV VI = -9V to -13V - 5 60 Load Regulation (Note1) ΔVO TJ = +25°C IO = 5mA to 1.5A - 10 120 mV TJ =+25°C IO = 250mA to 750mA -3 6 0 Quiescent Current I Q TJ =+25°C- 3 6 m A Quiescent Current Change ΔIQ IO = 5mA to 1A - 0.05 0.5 mA VI = -8V to -25V - 0.1 1.3 Temperature Coefficient of VD ΔVo/ΔTI O = 5mA - -0.5 - mV/ °C Output Noise Voltage V N f = 10Hz to 100kHz TA =+25°C -1 3 0- μV Ripple Rejection RR f = 120Hz ΔVI = 10V 54 60 - dB Dropout Voltage V D TJ = +25°C IO = 1A -2- V Short Circuit Current I SC TJ = +25°C, VI = -35V - 300 - mA Peak Current I PK TJ = +25°C- 2 . 2 - A

(VI = -14V, IO = 500mA, 0°C ≤TJ ≤ +125°C, CI =2.2μF, CO =1μF, unless otherwise specified.) Note 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Parameter Symbol Conditions Min. Typ. Max. Unit Output Voltage V O VIO = 5mA to 1A, PO ≤ 15W Line Regulation (Note1) ΔVO TJ = +25°C VI = -10.5V to -25V - 10 160 mV VI = -11V to -17V - 5 80 Load Regulation (Note1) ΔVO TJ = +25°C IO = 5mA to 1.5A -1 2 1 6 0 mV TJ =+25°C IO = 250mA to 750mA -4 8 0 Quiescent Current I Q TJ =+25°C- 3 6 m A Quiescent Current Change ΔIQ IO = 5mA to 1A - 0.05 0.5 mA VI = -10.5V to -25V - 0.1 1 Temperature Coefficient of VD ΔVo/ΔTI O = 5mA - -0.6 - mV/ °C Output Noise Voltage V N f = 10Hz to 100kHz TA =+25°C -1 7 5- μV Ripple Rejection RR f = 120Hz ΔVI = 10V 54 60 - dB Dropout Voltage V D TJ = +25°C IO = 1A -2- V Short Circuit Current I SC TJ = +25°C, VI = -35V - 300 - mA Peak Current I PK TJ = +25°C- 2 . 2 - A

(VI = -15V, IO = 500mA, 0°C ≤TJ ≤ +125°C, CI =2.2μF, CO =1μF, unless otherwise specified.) Note: 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Parameter Symbol Conditions Min. Typ. Max. Unit Output Voltage V O VIO = 5mA to 1A, PO ≤ 15W Line Regulation (Note1) ΔVO TJ = +25°C VI = -11.5V to -26V - 10 180 mV VI = -12V to -18V - 5 90 Load Regulation (Note1) ΔVO TJ = +25°C IO = 5mA to 1.5A - 12 180 mV TJ = +25°C IO = 250mA to 750mA -4 9 0 Quiescent Current I Q TJ = +25°C- 3 6 m A Quiescent Current Change ΔIQ IO = 5mA to 1A - 0.05 0.5 mA VI = -11.5V to -26V - 0.1 1 Temperature Coefficient of VD ΔVo/ΔTI O = 5mA - -0.6 - mV/ °C Output Noise Voltage V N f = 10Hz to 100kHz TA = +25°C -1 7 5- μV Ripple Rejection RR f = 120Hz ΔVI = 10V 54 60 - dB Dropout Voltage V D TJ = +25°C IO = 1A -2- V Short Circuit Current I SC TJ = +25°C, VI = -35V - 300 - mA Peak Current I PK TJ = +25°C- 2 . 2 - A

(VI = -17V, IO = 500mA, 0°C ≤TJ ≤ +125°C, CI =2.2μF, CO =1μF, unless otherwise specified.) Note: 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Parameter Symbol Conditions Min. Typ. Max. Unit Output Voltage V O VIO = 5mA to 1A, Pd ≤ 15W Line Regulation (Note1) ΔVO TJ = +25°C VI = -12.5V to -28V - 12 200 mV VI = -14V to -20V - 6 100 Load Regulation (Note1) ΔVO TJ = +25°C IO = 5mA to 1.5A -1 2 2 0 0 mV TJ = +25°C IO = 250mA to 750mA -4 1 0 0 Quiescent Current I Q TJ = +25°C- 3 6 m A Quiescent Current Change ΔIQ IO = 5mA to 1A - 0.05 0.5 mA VI = -12.5V to -28V - 0.1 1 Temperature Coefficient of VO ΔVo/ΔTI O = 5mA - -1 - mV/ °C Output Noise Voltage V N 10Hz ≤ f ≤ 100kHz TA =+25°C -2 8 0- μV Ripple Rejection RR f = 120Hz ΔVI = 10V 54 60 - dB Dropout Voltage V D TJ = +25°C IO = 1A -2- V Short Circuit Current I SC TJ = +25°C, VI = -35V - 300 - mA Peak Current I PK TJ = +25°C- 2 . 2 - A

(VI = -19V, IO = 500mA, 0°C ≤TJ ≤ +125°C, CI =2.2μF, CO =1μF, unless otherwise specified.) Note: 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Parameter Symbol Conditions Min. Typ. Max. Unit Output Voltage V O VIO = 5mA to 1A, PO ≤ 15W Line Regulation (Note1) ΔVO TJ = +25°C VI = -14.5V to -30V - 12 240 mV VI = -16V to -22V - 6 120 Load Regulation (Note1) ΔVO TJ = +25°C IO = 5mA to 1.5A -1 2 2 4 0 mV TJ = +25°C IO = 250mA to 750mA -4 1 2 0 Quiescent Current I Q TJ = +25°C- 3 6 m A Quiescent Current Change ΔIQ IO = 5mA to 1A - 0.05 0.5 mA VI = -14.5V to -30V - 0.1 1 Temperature Coefficient of VD ΔVo/ΔTI O = 5mA - -0.8 - mV/ °C Output Noise Voltage V N f = 10Hz to 100kHz TA = +25°C -2 0 0- μV Ripple Rejection RR f = 120Hz ΔVI = 10V 54 60 - dB Dropout Voltage V D TJ = +25°C IO = 1A -2- V Short Circuit Current I SC TJ = +25°C, VI = -35V - 300 - mA Peak Current I PK TJ = +25°C- 2 . 2 - A

(VI = -23V, IO = 500mA, 0°C ≤TJ ≤ +125°C, CI =2.2μF, CO =1μF, unless otherwise specified.) Note: 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Parameter Symbol Conditions Min. Typ. Max. Unit Output Voltage V O VIO = 5mA to 1A, PO ≤ 15W VI = -18V to -30V -14.25 -15 -15.75 Line Regulation (Note1) ΔVO TJ = +25°C VI = -17.5V to -30V - 12 300 mV VI = -20V to -26V - 6 150 Load Regulation (Note1) ΔVO TJ = +25°C IO = 5mA to 1.5A -1 2 3 0 0 mV TJ = +25°C IO = 250mA to 750mA -4 1 5 0 Quiescent Current I Q TJ = +25°C- 3 6 m A Quiescent Current Change ΔIQ IO = 5mA to 1A - 0.05 0.5 mA VI = -17.5V to -30V - 0.1 1 Temperature Coefficient of VD ΔVo/ΔTI O = 5mA - -0.9 - mV/ °C Output Noise Voltage V N f = 10Hz to 100kHz TA =+25°C - 250 - μV Ripple Rejection RR f = 120Hz ΔVI = 10V 54 60 - dB Dropout Voltage V D TJ = +25°C IO = 1A -2- V Short Circuit Current I SC TJ = +25°C, VI = -35V - 300 - mA Peak Current I PK TJ = +25°C- 2 . 2 - A

(VI = -27V, IO = 500mA, 0°C ≤TJ ≤ +125°C, CI =2.2μF, CO =1μF, unless otherwise specified.) Note: 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Parameter Symbol Conditions Min. Typ. Max. Unit Output Voltage V O VIO = 5mA to 1A, PO ≤ 15W Line Regulation (Note1) ΔVO TJ = +25°C VI = -21V to -33V - 15 360 mV VI = -24V to -30V - 8 180 Load Regulation (Note1) ΔVO TJ = +25°C IO = 5mA to 1.5A -1 5 3 6 0 mV TJ = +25°C IO = 250mA to 750mA -5 1 8 0 Quiescent Current I Q TJ = +25°C- 3 6 m A Quiescent Current Change ΔIQ IO = 5mA to 1A - 0.05 0.5 mA VI = -21V to -33V - 0.1 1 Temperature Coefficient of VD ΔVo/ΔTI O = 5mA - -1 - mV/ °C Output Noise Voltage V N f = 10Hz to 100kHz TA = +25°C -3 0 0- μV Ripple Rejection RR f = 120Hz ΔVI = 10V 54 60 - dB Dropout Voltage V D TJ = +25°C IO = 1A -2- V Short Circuit Current I SC TJ = +25°C, VI = -35V - 300 - mA Peak Current I PK TJ = +25°C- 2 . 2 - A

(VI = -33V, IO = 500mA, 0°C ≤TJ ≤ +125°C, CI =2.2μF, CO =1μF, unless otherwise specified.) Note: 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Parameter Symbol Conditions Min. Typ. Max. Unit Output Voltage V O VIO = 5mA to 1A, PO ≤ 15W VI = -27V to -38V -22.8 -24 -25.2 Line Regulation (Note1) ΔVO TJ = +25°C VI = -27V to -38V - 15 480 mV VI = -30V to -36V - 8 180 Load Regulation (Note1) ΔVO TJ = +25°C IO = 5mA to 1.5A -1 5 4 8 0 mV TJ = +25°C IO = 250mA to 750mA -5 2 4 0 Quiescent Current I Q TJ = +25°C- 3 6 m A Quiescent Current Change ΔIQ IO = 5mA to 1A - 0.05 0.5 mA VI = -27V to -38V - 0.1 1 Temperature Coefficient of VD ΔVo/ΔTI O = 5mA - -1 - mV/ °C Output Noise Voltage V N f = 10Hz to 100kHz TA = +25°C -4 0 0- μV Ripple Rejection RR f = 120Hz ΔVI = 10V 54 60 - dB Dropout Voltage V D TJ = +25°C IO = 1A -2- V Short Circuit Current I SC TJ = +25°C, VI = -35V - 300 - mA Peak Current I PK TJ = +25°C- 2 . 2 - A

TO-220 [ SINGLE GAUGE ]

Ordering Information

Product Number Output Voltage Tolerance Package Operating Temperature LM7905CT ±4% TO-220 (Single Gauge) 0 ~ +125°C LM7906CT LM7908CT LM7909CT LM7910CT LM7912CT LM7915CT LM7918CT LM7924CT

9/7/11 0.0m 001 Stock#DS400021 © 2011 Fairchild Semiconductor Corporation LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in an y component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.

www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries i n the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . A listing of ON Semiconductor’s product/patent ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the right s of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative © Semiconductor Components Industries, LLC