LM301A_11 ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

  • Low Input Offset Current: 20 nA Maximum Over Temperature Range
  • External Frequency Compensation for Flexibility
  • Class AB Output Provides Excellent Linearity
  • Output Short Circuit Protection
  • Guaranteed Drift Characteristics
  • Pb−Free Packages are Available

Figure 1. Standard Compensation

10 M/C0087

5.1 M/C0087

Figure 2. Double−Ended Limit Detector dimensions section on page 2 of this data sheet.

ORDERING INFORMATION

x = 2 or 3 A = Assembly Location WL, L = Wafer Lot YY, Y = Year WW, W = Work Week G = Pb −Free Package /C0071 = Pb−Free Package LMx01AN AWL YYWWG 201AV ALYW /C0071 LMx01 ALYWA /C0071 LM201AVDR2G

LM301A, LM201A, LM201AV http://onsemi.com Inputs Balance Compensation VCC Output VEE Balance 25500 80 k 1.0 k 40/C8201k40/C8201k 10 k20 k5 k 450 250 Figure 3. Representative Circuit Schematic Device Package Shipping† LM301ADG SOIC−8 (Pb−Free)

98 Units/Rail

LM301ADR2G SOIC−8 (Pb−Free)

2500 Tape & Reel

LM301AN PDIP−8 50 Units/Rail LM301ANG PDIP−8 (Pb−Free)

50 Units/Rail

LM201ADG SOIC−8 (Pb−Free) LM201ADR2G SOIC−8 (Pb−Free) LM201AN PDIP−8 50 Units/Rail LM201ANG PDIP−8 (Pb−Free) LM201AVDR2G SOIC−8 (Pb−Free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.

LM301A, LM201A, LM201AV http://onsemi.com MAXIMUM RATINGS Value Rating Symbol LM201A LM201AV LM301A Unit Power Supply Voltage VCC, VEE ±22 ±22 ±18 Vdc Input Differential Voltage VID ±30 V Input Common Mode Range (Note 1) VICR ±15 V Output Short Circuit Duration tSC Continuous Power Dissipation (Package Limitation) PD Plastic Dual−In−Line Package 625 625 625 mW Derate above TA = +25°C 5.0 5.0 5.0 mW/ °C Operating Ambient Temperature Range TA −25 to +85 −40 to +105 0 to +70 °C Storage Temperature Range Tstg −65 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above t he Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise noted.) Unless otherwise specified, these specifications apply for supply voltages from ±5.0 V to ±20 V for the LM201A and LM201AV, and from ±5.0 V to ±15 V for the LM301A. Characteristic Symbol LM201A / LM201AV LM301A UnitMin Typ Max Min Typ Max Input Offset Voltage (RS ≤ 50 k/C0087) VIO − 0.7 2.0 − 2.0 7.5 mV Input Offset Current IIO − 1.5 10 − 3.0 50 nA Input Bias Current IIB − 30 75 − 70 250 nA Input Resistance ri 1.5 4.0 − 0.5 2.0 − M/C0087 Supply Current ICC,IEE mA Large Signal Voltage Gain AV 50 160 − 25 160 − V/mV (VCC/VEE = ±15 V, VO = ±10 V, RL > 2.0 k/C0087) The following specifications apply over the operating temperature range. Input Offset Voltage (RS ≤ 50 k/C0087) VIO − − 3.0 − − 10 mV Input Offset Current IIO − − 20 − − 70 nA Avg Temperature Coefficient of Input Offset Voltage (Note 2) /C0068VIO//C0068T − 3.0 15 − 6.0 30 /C0109V/°C TA(min) ≤ TA ≤ TA (max) Avg Temperature Coefficient of Input Offset Current (Note 2) /C0068IIO//C0068T nA/°C Input Bias Current IIB − − 100 − − 300 nA Large Signal Voltage Gain AVOL 25 − − 15 − − V/mV (VCC/VEE = ±15 V, VO = ±10V, RL > 2.0 k/C0087) Input Voltage Range VICR V Common Mode Rejection (RS ≤ 50 k/C0087) CMR 80 96 − 70 90 − dB Supply Voltage Rejection (RS ≤ 50 k/C0087) PSR 80 96 − 70 96 − dB Output Voltage Swing VO ±12 ±14 − ±12 ±14 − V Supply Currents (TA = TA(max), VCC/VEE = ±20 V) ICC,IEE − 1.2 2.5 − − − mA 1. For supply voltages less than ±15 V, the absolute maximum input voltage is equal to the supply voltage. 2. Guaranteed by design.

LM301A, LM201A, LM201AV http://onsemi.com PACKAGE DIMENSIONS

8 LEAD PDIP

CASE 626−05 ISSUE M F NOTE 5 D e b L A E A TOP VIEW C SEATING PLANE

0.010 CASIDE VIEW

b 0.014 0.018 0.022 C 0.008 0.010 0.014 D 0.355 0.365 0.400 e 0.100 BSC E 0.300 0.310 0.325 L 0.115 0.130 0.150 0.35 0.46 0.56 0.20 0.25 0.36 9.02 9.27 10.02

2.54 BSC

7.62 7.87 8.26 2.92 3.30 3.81 MIN NOM MAX MILLIMETERS NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. DIMENSION E IS MEASURED WITH THE LEADS RE- STRAINED PARALLEL AT WIDTH E2. 4. DIMENSION E1 DOES NOT INCLUDE MOLD FLASH. 5. ROUNDED CORNERS OPTIONAL. 0.300 BSC 7.62 BSC M e/2 c

LM301A, LM201A, LM201AV http://onsemi.com PACKAGE DIMENSIONS SOIC−8 NB CASE 751−07 ISSUE AK SEATING PLANE N J X 45/C0095 K NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. 6. 751 −01 THRU 751−06 ARE OBSOLETE. NEW STANDARD IS 751−07. A B S DH C 0.10 (0.004) DIM A MIN MAX MIN MAX INCHES 4.80 5.00 0.189 0.197 MILLIMETERS B 3.80 4.00 0.150 0.157 C 1.35 1.75 0.053 0.069 D 0.33 0.51 0.013 0.020 G 1.27 BSC 0.050 BSC H 0.10 0.25 0.004 0.010 J 0.19 0.25 0.007 0.010 K 0.40 1.27 0.016 0.050 M 0 8 0 8 N 0.25 0.50 0.010 0.020 S 5.80 6.20 0.228 0.244 −X− −Y− G MYM0.25 (0.010) −Z− YM0.25 (0.010) Z S X S M /C0095/C0095/C0095/C0095 1.52 0.060 7.0 0.275 0.6 0.024 1.270 0.050 4.0 0.155 /C0466mm inches/C0467SCALE 6:1 *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. SOLDERING FOOTPRINT* ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 LM301A/D LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative