LM301A MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

2 MOTOROLA ANALOG IC DEVICE DATA

Rating Symbol LM201A LM301A Unit Power Supply Voltage VCC, VEE ±22 ±18 Vdc Input Differential Voltage VID ±30 V Input Common Mode Range (Note 1) VICR ±15 V Output Short Circuit Duration tSC Continuous Power Dissipation (Package Limitation) PD Plastic Dual–In–Line Package (LM201A/ 625 625 mW Derate above TA = +25°C 301A) 5.0 5.0 mW/ °C Operating Ambient Temperature Range TA –25 to +85 0 to +70 °C Storage Temperature Range Tstg –65 to +150 °C NOTE: 1. For supply voltages less than ±15 V, the absolute maximum input voltage is equal to the supply voltage. ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise noted.) Unless otherwise specified, these specifications apply for supply voltages from ± 5.0 V to ± 20 V for the LM201A, and from ± 5.0 V to ±15 V for the LM301A. Ch i i Sb l LM201A LM301A UiCharacteristic Symbol Min Typ Max Min Typ Max Unit Input Offset Voltage (RS ≤ 50 kΩ ) VIO – 0.7 2.0 – 2.0 7.5 mV Input Offset Current IIO – 1.5 10 – 3.0 50 nA Input Bias Current IIB – 30 75 – 70 250 nA Input Resistance ri 1.5 4.0 – 0.5 2.0 – M Ω Supply Current ICC ,IEE mA Large Signal Voltage Gain AV 50 160 – 25 160 – V/mV (VCC /VEE = ±15 V, VO = ±10 V, RL > 2.0 kΩ ) The following specifications apply over the operating temperature range. Input Offset Voltage (RS ≤ 50 kΩ ) VIO – – 3.0 – – 10 mV Input Offset Current IIO – – 20 – – 70 nA Avg Temperature Coefficient of Input Offset VoltageΔVIO/ΔT – 3.0 15 – 6.0 30 µV/°C TA(min) ≤ TA ≤ TA (max) Avg Temperature Coefficient of Input Offset CurrentΔIIO/ΔT nA/°C Input Bias Current IIB – – 100 – – 300 nA Large Signal Voltage Gain AVOL 25 – – 15 – – V/mV (VCC /VEE = ±15 V, VO = ±10V, RL > 2.0 kΩ ) Input Voltage Range VICR V Common Mode Rejection (RS ≤ 50 kΩ ) CMR 80 96 – 70 90 – dB Supply Voltage Rejection (RS ≤ 50 kΩ ) PSR 80 96 – 70 96 – dB Output Voltage Swing VO ±12 ±14 – ±12 ±14 – V Supply Currents (TA = TA(max), VCC /VEE = ± 20 V) ICC ,IEE – 1.2 2.5 – – – mA

4 MOTOROLA ANALOG IC DEVICE DATA

Figure 10. Voltage Follower Pulse Response Figure 11. Open Loop Frequency Response Figure 12. Large Signal Frequency Response Figure 13. Inverter Pulse Response Figure 14. Single–Pole Compensation Figure 15. Feedforward Compensation

5MOTOROLA ANALOG IC DEVICE DATA OUTLINE DIMENSIONS NOTES: 1. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 2. PACKAGE CONTOUR OPTIONAL (ROUND OR SQUARE CORNERS). 3. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. F NOTE 2 –A– –B– –T– SEATING PLANE H J G D K N C L M MAM0.13 (0.005) B MT DIM MIN MAX MIN MAX INCHESMILLIMETERS A 9.40 10.16 0.370 0.400 B 6.10 6.60 0.240 0.260 C 3.94 4.45 0.155 0.175 D 0.38 0.51 0.015 0.020 F 1.02 1.78 0.040 0.070 G 2.54 BSC 0.100 BSC H 0.76 1.27 0.030 0.050 J 0.20 0.30 0.008 0.012 K 2.92 3.43 0.115 0.135 L 7.62 BSC 0.300 BSC N 0.76 1.01 0.030 0.040 /C0095/C0095 D SUFFIX PLASTIC PACKAGE CASE 751–05 (SO–8) ISSUE R N SUFFIX PLASTIC PACKAGE CASE 626–05 (LM201A and LM301A) ISSUE K SEATING PLANE A0.25 M CB SS

0.25 M B M

h /C0113 C X 45/C0095 L DIM MIN MAX MILLIMETERS A 1.35 1.75 A1 0.10 0.25 B 0.35 0.49 C 0.18 0.25 D 4.80 5.00 E

1.27 BSCe

3.80 4.00 H 5.80 6.20 h 0 7 L 0.40 1.25 /C0113 0.25 0.50 /C0095/C0095 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETERS. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE MOLD PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. D E H A B e BA1 C A 0.10

6 MOTOROLA ANALOG IC DEVICE DATA

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–54543–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315 INTERNET : http://Design–NET.com 51 Ting Kok R oad, Tai Po, N.T., Hong Kong. 852–26629298 LM301A/D /C0042/C0076/C0077/C0051/C0048/C0049/C0065/C0047/C0068/C0042