LM139_15 TI1 | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 37

Technical content

IN− OUT Product Folder Sample & Buy T echnical Documents Tools & Software Support & Community LM139,LM239,LM339,LM139A LM239A,LM339A,LM2901,LM2901AV,LM2901V SLCS006T –OCTOBER 1979–REVISED JUNE 2015 LMx39x,LM2901xxQuadDifferentialComparators

1 Features 3 Description

The LMx39x and the LM2901xx devices consist of 1• Wide Supply Ranges four independent voltage comparators that are– Single Supply: 2 V to 36 V designed to operate from a single power supply over(Tested to 30 V for Non-V Devices and a wide range of voltages. Operation from dual

32 V for V-Suffix Devices) supplies also is possible, as long as the difference

between the two supplies is 2 V to 36 V, and VCC is– Dual Supplies: ±1 V to ±18 V at least 1.5 V more positive than the input common-(Tested to ±15 V for Non-V Devices and mode voltage. Current drain is independent of the±16 V for V-Suffix Devices) supply voltage. The outputs can be connected to• Low Supply-Current Drain Independent of other open-collector outputs to achieve wired-ANDSupply Voltage: 0.8 mA (Typical) relationships.

  • Low Input Bias Current: 25 nA (Typical) The LM139 and LM139A devices are characterized• Low Input Offset Current: 3 nA (Typical) (LM139) for operation over the full military temperature range
  • Low Input Offset Voltage: 2 mV (Typical) of –55°C to 125°C. The LM239 and LM239A devices are characterized for operation from –25°C to 125°C.• Common-Mode Input Voltage Range The LM339 and LM339A devices are characterizedIncludes Ground for operation from 0°C to 70°C. The LM2901,• Differential Input Voltage Range Equal to LM2901AV, and LM2901V devices are characterized Maximum-Rated Supply Voltage: ±36 V for operation from –40°C to 125°C.
  • Low Output Saturation Voltage Device Information(1)
  • Output Compatible With TTL, MOS, and CMOS PART NUMBER PACKAGE BODY SIZE (NOM)• On Products Compliant to MIL-PRF-38535, CDIP (14) 21.30 mm × 7.60 mmAll Parameters Are Tested Unless Otherwise LM139x LCCC (20) 8.90 mm × 8.90 mmNoted. On All Other Products, Production CFP (14) 9.20 mm × 6.29 mmProcessing Does Not Necessarily Include Testing of All Parameters. LM139x, LM239x, SOIC (14) 8.70 mm × 3.90 mmLM339x,2 Applications LM2901x
  • Industrial LM239, LM339x, PDIP (14) 19.30 mm × 6.40 mmLM2901• Automotive LM239, LM2901 TSSOP (14) 5.00 mm × 4.40 mm– HEV/EV and Power Trains LM339x, LM2901 SO (14) 10.20 mm × 5.30 mm – Infotainment and Clusters LM339x SSOP (14) 6.50 mm × 5.30 mm – Body Control Modules (1) For all available packages, see the orderable addendum at
  • Power Supervision the end of the data sheet.
  • Oscillators
  • Peak Detectors
  • Logic Voltage Translation Simplified Schematic An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA. On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.

LM139,LM239,LM339,LM139A LM239A,LM339A,LM2901,LM2901AV,LM2901V SLCS006T –OCTOBER 1979–REVISED JUNE 2015 www.ti.com Table of Contents

4 Revision History

NOTE: Page numbers for previous revisions may differ from page numbers in the current version. Changes from Revision S (August 2012) to Revision T Page

  • Added Applications, Device Information table, Pin Configuration and Functions section, ESD Ratings table, Thermal Information table, Feature Description section, Device Functional Modes, Application and Implementation section, Power Supply Recommendations section, Layout section, Device and Documentation Support section, and

2 Submit Documentation Feedback Copyright © 1979–2015, Texas Instruments Incorporated

Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

LM139,LM239,LM339,LM139A LM239A,LM339A,LM2901,LM2901AV,LM2901V www.ti.com SLCS006T –OCTOBER 1979–REVISED JUNE 2015

5 Device Comparison Table

PART NUMBER PACKAGE BODY SIZE (NOM) LM139J, LM139AJ CDIP (14) 21.30 mm × 7.60 mm LM139FK, LM139AFK LCCC (20) 8.90 mm × 8.90 mm LM139W, LM139AW CFP (14) 9.20 mm × 6.29 mm LM139D, LM139AD, LM239D, LM293AD, LM339D, SOIC (14) 8.70 mm × 3.90 mmLM339AD, LM2901D LM239N, LM339N, LM339AN, LM2901N PDIP (14) 19.30 mm × 6.40 mm LM239PW, LM2901PW TSSOP (14) 5.00 mm × 4.40 mm LM339NS, LM339ANS, LM2901NS SOP (14) 10.20 mm × 5.30 mm LM339DB, LM339ADB SSOP (14) 6.50 mm × 5.30 mm Copyright © 1979–2015, Texas Instruments Incorporated Submit Documentation Feedback 3 Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

4IN− VC C NC 2IN− NC 2IN+ 2OUT 1OUT NC 3IN−3IN+ 3OUT 4OUT 1IN−1IN+NC 1OUT 2OUT VC C 2IN− 2IN+ 1IN− 1IN+ OUT3 OUT4 GND 4IN+ 4IN− 3IN+ 3IN− LM139,LM239,LM339,LM139A LM239A,LM339A,LM2901,LM2901AV,LM2901V SLCS006T –OCTOBER 1979–REVISED JUNE 2015 www.ti.com

6 Pin Configuration and Functions

D, DB, N, NS, PW, J, or W Package FK PackageSOIC, SSOP, PDIP, SO, TSSOP, CDIP, or CFP 20-Pin LCCC(1) Top View Top View (1) NC = no internal connection. Pin Functions PIN I/O(1) DESCRIPTIOND, J, W, B,NAME FKPW, DB, N, NS 1IN+ 7 10 I Positive input pin of the comparator 1 1IN– 6 9 I Negative input pin of the comparator 1 1OUT 1 2 O Output pin of the comparator 1 2IN+ 5 8 I Positive input pin of the comparator 2 2IN– 4 6 I Negative input pin of the comparator 2 2OUT 2 3 O Output pin of the comparator 2 3IN+ 9 13 I Positive input pin of the comparator 3 3IN– 8 12 I Negative input pin of the comparator 3 3OUT 14 20 O Output pin of the comparator 3 4IN+ 11 16 I Positive input pin of the comparator 4 4IN– 10 14 I Negative input pin of the comparator 4 4OUT 13 19 O Output pin of the comparator 4 GND 12 18 I Ground VCC 3 4 I Supply pin NC — — No connect (no internal connection) (1) I = Input, O = Output

4 Submit Documentation Feedback Copyright © 1979–2015, Texas Instruments Incorporated

Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

LM139,LM239,LM339,LM139A LM239A,LM339A,LM2901,LM2901AV,LM2901V www.ti.com SLCS006T –OCTOBER 1979–REVISED JUNE 2015

7 Specifications

7.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1) MIN MAX UNIT VCC Supply voltage(2) 36 V VID Differential input voltage(3) ±36 V VI Input voltage range (either input) –0.3 36 V VO Output voltage 36 V IO Output current 20 mA Duration of output short circuit to ground(4) Unlimited TJ Operating virtual-junction temperature 150 °C Case temperature for 60 s FK package 260 °C Lead temperature 1.6 mm (1/16 in) from case for 60 s J package 300 °C Tstg Storage temperature –65 150 °C (1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) All voltage values, except differential voltages, are with respect to network ground. (3) Differential voltages are at xIN+ with respect to xIN–. (4) Short circuits from outputs to VCC can cause excessive heating and eventual destruction.

7.2 ESD Ratings

Human body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±500 V(ESD) Electrostatic discharge VCharged-device model (CDM), per JEDEC specification JESD22- ±750C101(2) (1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. (2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

7.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT Non-V devices 2 30 V VCC Supply voltage V devices 2 32 V TJ Junction temperature –40 125 °C

7.4 Thermal Information (14-Pin Packages)

LMx39, LM2901 THERMAL METRIC(1) UNITD DB N NS PW J W (SOIC) (SSOP) (PDIP) (SO) (TSSOP) (CDIP) (CFP) RθJA Junction-to-ambient thermal resistance 86 96 80 76 113 °C/W RθJC(top) Junction-to-case (top) thermal resistance 15.05 14.65 °C/W (1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report, SPRA953.

7.5 Thermal Information (20-Pin Packages)

LMx39, LM2901 THERMAL METRIC(1) UNIT FK (LCCC) RθJC(top) Junction-to-case (top) thermal resistance 5.61 °C/W (1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report, SPRA953. Copyright © 1979–2015, Texas Instruments Incorporated Submit Documentation Feedback 5 Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

LM139,LM239,LM339,LM139A LM239A,LM339A,LM2901,LM2901AV,LM2901V SLCS006T –OCTOBER 1979–REVISED JUNE 2015 www.ti.com

7.6 Electrical Characteristics for LM139 and LM139A

at specified free-air temperature, VCC = 5 V (unless otherwise noted) LM139 LM139A PARAMETER TEST CONDITIONS(1) TA(2) UNIT MIN TYP MAX MIN TYP MAX VCC = 5 V to 30 V, 25°C 2 5 1 2 VIO Input offset voltage VIC = VICR min, mV Full range 9 4VO = 1.4 V 25°C 3 25 3 25 IIO Input offset current VO = 1.4 V nA Full range 100 100 25°C –25 –100 –25 –100 IIB Input bias current VO = 1.4 V nA Full range –300 –300 0 to 0 to25°C VCC – 1.5 VCC – 1.5Common-mode input-VICR Vvoltage range(3) 0 to 0 toFull range VCC – 2 VCC – 2 Large-signal differential- VCC+ = ±7.5 V,AVD 25°C 200 50 200 V/mVvoltage amplification VO = –5 V to 5 V VOH = 5 V 25°C 0.1 0.1 nA IOH High-level output current VID = 1 V VOH = 30 V Full range 1 1 μA 25°C 150 400 150 400 VOL Low-level output voltage VID = –1 V, IOL = 4 mA mV Full range 700 700 IOL Low-level output current VID = –1 V, VOL = 1.5 V 25°C 6 16 6 16 mA Supply currentICC VO = 2.5 V, No load 25°C 0.8 2 0.8 2 mA(four comparators) (1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified. (2) Full range (MIN to MAX) for LM139 and LM139A is –55°C to 125°C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified. (3) The voltage at either input or common-mode must not be allowed to go negative by more than 0.3 V. The upper end of the common- mode voltage range is VCC+ – 1.5 V; however, one input can exceed VCC, and the comparator will provide a proper output state as long as the other input remains in the common-mode range. Either or both inputs can go to 30 V without damage.

7.7 Electrical Characteristics for LMx39 and LMx39A

at specified free-air temperature, VCC = 5 V (unless otherwise noted) LM239 LM239A LM339 LM339APARAMETER TEST CONDITIONS(1) TA (2) UNIT MIN TYP MAX MIN TYP MAX VCC = 5 V to 30 V, 25°C 2 5 1 3 VIO Input offset voltage VIC = VICR min, mV Full range 9 4VO = 1.4 V 25°C 5 50 5 50 IIO Input offset current VO = 1.4 V nA Full range 150 150 25°C –25 –250 –25 –250 IIB Input bias current VO = 1.4 V nA Full range –400 –400 0 to 0 to25°C VCC – 1.5 VCC – 1.5Common-mode input-VICR Vvoltage range(3) 0 to 0 toFull range VCC – 2 VCC – 2 VCC = 15 V,Large-signal differential-AVD VO = 1.4 V to 11.4 V, 25°C 50 200 50 200 V/mVvoltage amplification RL ≥ 15 kΩ to VCC (1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified. (2) Full range (MIN to MAX) for LM239/LM239A is –25°C to 85°C, and for LM339/LM339A is 0°C to 70°C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified. (3) The voltage at either input or common-mode must not be allowed to go negative by more than 0.3 V. The upper end of the common- mode voltage range is VCC+ – 1.5 V; however, one input can exceed VCC, and the comparator will provide a proper output state as long as the other input remains in the common-mode range. Either or both inputs can go to 30 V without damage.

6 Submit Documentation Feedback Copyright © 1979–2015, Texas Instruments Incorporated

Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

LM139,LM239,LM339,LM139A LM239A,LM339A,LM2901,LM2901AV,LM2901V www.ti.com SLCS006T –OCTOBER 1979–REVISED JUNE 2015 Electrical Characteristics for LMx39 and LMx39A (continued) at specified free-air temperature, VCC = 5 V (unless otherwise noted) LM239 LM239A LM339 LM339APARAMETER TEST CONDITIONS(1) TA(2) UNIT MIN TYP MAX MIN TYP MAX VOH = 5 V 25°C 0.1 50 0.1 50 nA IOH High-level output current VID = 1 V VOH = 30 V Full range 1 1 μA 25°C 150 400 150 400 VOL Low-level output voltage VID = –1 V, IOL = 4 mA mV Full range 700 700 IOL Low-level output current VID = –1 V, VOL = 1.5 V 25°C 6 16 6 16 mA Supply currentICC VO = 2.5 V, No load 25°C 0.8 2 0.8 2 mA(four comparators)

7.8 Electrical Characteristics for LM2901

at specified free-air temperature, VCC = 5 V (unless otherwise noted) LM2901 PARAMETER TEST CONDITIONS(1) TA (2) UNIT MIN TYP MAX 25°C 2 7 Non-A devicesVIC = VICR min, Full range 15 VIO Input offset voltage VO = 1.4 V, mV 25°C 1 2VCC = 5 V to MAX(3) A-suffix devices Full range 4 25°C 5 50 IIO Input offset current VO = 1.4 V nA Full range 200 25°C –25 –250 IIB Input bias current VO = 1.4 V nA Full range –500 0 to25°C VCC – 1.5Common-mode input-VICR Vvoltage range(4) 0 toFull range VCC – 2 Large-signal differential- VCC = 15 V, VO = 1.4 V to 11.4 V,AVD 25°C 25 100 V/mVvoltage amplification RL ≥ 15 kΩ to VCC VOH = 5 V 25°C 0.1 50 nA IOH High-level output current VID = 1 V VOH = VCC MAX(3) Full range 1 μA Non-V devices 150 500 25°CVID = –1 V,VOL Low-level output voltage V-suffix devices 150 400 mVIOL = 4 mA All devices Full range 700 IOL Low-level output current VID = –1 V, VOL = 1.5 V 25°C 6 16 mA VCC = 5 V 0.8 2Supply current VO = 2.5 V,ICC 25°C mA(four comparators) No load VCC = MAX(3) 1 2.5 (1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified. (2) Full range (MIN to MAX) for LM2901 is –40°C to 125°C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified. (3) VCC MAX = 30 V for non-V devices, and 32 V for V-suffix devices (4) The voltage at either input or common-mode must not be allowed to go negative by more than 0.3 V. The upper end of the common- mode voltage range is VCC+ – 1.5 V; however, one input can exceed VCC, and the comparator will provide a proper output state as long as the other input remains in the common-mode range. Either or both inputs can go to VCC MAX without damage. Copyright © 1979–2015, Texas Instruments Incorporated Submit Documentation Feedback 7 Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

LM139,LM239,LM339,LM139A LM239A,LM339A,LM2901,LM2901AV,LM2901V SLCS006T –OCTOBER 1979–REVISED JUNE 2015 www.ti.com

7.9 Switching Characteristics for LM2901

VCC = 5 V, TA = 25°C LM2901 PARAMETER TEST CONDITIONS UNIT TYP 100-mV input step with 5-mV overdrive 1.3RL connected to 5 V through 5.1 kΩ,Response time μsCL = 15 pF(1)(2) TTL-level input step 0.3 (1) CL includes probe and jig capacitance. (2) The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.

7.10 Switching Characteristics for LM139 and LM139A

VCC = 5 V, TA = 25°C LM139 LM139APARAMETER TEST CONDITIONS UNIT TYP 100-mV input step with 5-mV overdrive 1.3RL connected to 5 V through 5.1 kΩ,Response time μsCL = 15 pF(1)(2) TTL-level input step 0.3 (1) CL includes probe and jig capacitance. (2) The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.

7.11 Switching Characteristics for LMx39 and LMx39A

VCC = 5 V, TA = 25°C LM239 LM239A LM339PARAMETER TEST CONDITIONS UNIT LM339A TYP 100-mV input step with 5-mV overdrive 1.3RL connected to 5 V through 5.1 kΩ,Response time μsCL = 15 pF(1)(2) TTL-level input step 0.3 (1) CL includes probe and jig capacitance. (2) The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.

8 Submit Documentation Feedback Copyright © 1979–2015, Texas Instruments Incorporated

Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

7.12 Typical Characteristics

Figure 1. Supply Current vs Supply Voltage Figure 2. Input Bias Current vs Supply Voltage Figure 4. Response Time for Various OverdrivesFigure 3. Output Saturation Voltage Figure 5. Response Time for Various Overdrives

8 Detailed Description

8.1 Overview

range (2 V to 36 V), low Iq, and fast response of the device. This device is Q100 qualified and can operate over a wide temperature range (–40°C to 125°C). to be used in AND functionality.

8.2 Functional Block Diagram

Figure 6. Schematic (Each Comparator)

8.3 Feature Description

enables much head room for modern day supplies of 3.3 V and 5 V.

8.4 Device Functional Modes

8.4.1 Voltage Comparison

10 Submit Documentation Feedback Copyright © 1979–2015, Texas Instruments Incorporated

9 Application and Implementation

the design implementation to confirm system functionality.

9.1 Application Information

wide supply range and high voltage capability makes LMx39 optimal for level shifting to a higher or lower voltage.

9.2 Typical Application

Figure 7. Single-ended and Differential Comparator Configurations

9.2.1 Design Requirements

For this design example, use the parameters listed in Table 1 as the input parameters. Table 1. Design Parameters

9.2.2 Detailed Design Procedure

  • Input voltage range
  • Minimum overdrive voltage
  • Output and drive current
  • Response time

9.2.2.1 Input Voltage Range

P PULLUP LR C/c116 /c64 /c180 LM139,LM239,LM339,LM139A LM239A,LM339A,LM2901,LM2901AV,LM2901V SLCS006T –OCTOBER 1979–REVISED JUNE 2015 www.ti.com The following list describes the outcomes of some input voltage situations.

  • When both IN– and IN+ are both within the common-mode range: – If IN– is higher than IN+ and the offset voltage, the output is low and the output transistor is sinking current – If IN– is lower than IN+ and the offset voltage, the output is high impedance and the output transistor is not conducting
  • When IN– is higher than common mode and IN+ is within common mode, the output is low and the output transistor is sinking current
  • When IN+ is higher than common mode and IN– is within common mode, the output is high impedance and the output transistor is not conducting
  • When IN– and IN+ are both higher than common mode, the output is low and the output transistor is sinking current

9.2.2.2 Minimum Overdrive Voltage

Overdrive voltage is the differential voltage produced between the positive and negative inputs of the comparator over the offset voltage (VIO). In order to make an accurate comparison, the overdrive voltage (VOD) must be higher than the input offset voltage (VIO). Overdrive voltage can also determine the response time of the comparator, with the response time decreasing with increasing overdrive. Figure 8 and Figure 9 show positive and negative response times with respect to overdrive voltage.

9.2.2.3 Output and Drive Current

Output current is determined by the load and pullup resistance and logic and pullup voltage. The output current produces a low-level output voltage (VOL) from the comparator, where VOL is proportional to the output current. The output current can also effect the transient response.

9.2.2.4 Response Time

The load capacitance (CL), pullup resistance (RPULLUP), and equivalent collector-emitter resistance (RCE) levels determine the transient response. Equation 1 approximates the positive response time. Equation 2 approximates the negative response time. Equation 3 calculates the collector-emitter resistance. (1) (2) where

  • VOL is the low-level output voltage
  • IOUT is the output current (3)

12 Submit Documentation Feedback Copyright © 1979–2015, Texas Instruments Incorporated

Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V

3 GND

9.2.3 Application Curves

Figure 8 and Figure 9 were generated with scope probe parasitic capacitance of 50 pF. Figure 8. Response Time vs Output Voltage Figure 9. Response Time vs Output Voltage

10 Power Supply Recommendations

input and create an inaccurate comparison.

11 Layout

11.1 Layout Guidelines

supply and negative supply (if available). the device and system ground.

11.2 Layout Example

Figure 10. LMx39 Layout Example

12 Device and Documentation Support

12.1 Related Links

resources, tools and software, and quick access to sample or buy. Table 2. Related Links

12.2 Community Resources

solve problems with fellow engineers. contact information for technical support.

12.3 Trademarks

E2E is a trademark of Texas Instruments. All other trademarks are the property of their respective owners.

12.4 Electrostatic Discharge Caution

during storage or handling to prevent electrostatic damage to the MOS gates.

12.5 Glossary

This glossary lists and explains terms, acronyms, and definitions.

13 Mechanical, Packaging, and Orderable Information

this document. For browser based versions of this data sheet, refer to the left hand navigation.

14 Submit Documentation Feedback Copyright © 1979–2015, Texas Instruments Incorporated

www.ti.com 1-Jan-2016 Addendum-Page 1 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish (6) MSL Peak Temp (3) Op Temp (°C) Device Marking (4/5) Samples 5962-7700801VCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-7700801VC A LM139JQMLV 5962-87739012A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 5962- 87739012A LM139AFKB 5962-8773901CA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8773901CA LM139AJB 5962-8773901DA ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8773901DA LM139AWB 5962-9673802V9B ACTIVE XCEPT KGD 0 100 TBD Call TI N / A for Pkg Type -55 to 125 5962-9673802VCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9673802VC A LM139AJQMLV 77008012A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 77008012A LM139FKB 7700801CA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 7700801CA LM139JB 7700801DA ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type -55 to 125 7700801DA LM139WB JM38510/11201BCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510 /11201BCA LM139AD ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM139A LM139ADG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM139A LM139ADR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM139A LM139ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM139A LM139AFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 5962- 87739012A LM139AFKB LM139AJ ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 LM139AJ

www.ti.com 1-Jan-2016 Addendum-Page 2 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish (6) MSL Peak Temp (3) Op Temp (°C) Device Marking (4/5) Samples LM139AJB ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8773901CA LM139AJB LM139AN OBSOLETE PDIP N 14 TBD Call TI Call TI -55 to 125 LM139AW ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type -55 to 125 LM139AW LM139AWB ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-8773901DA LM139AWB LM139D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM139 LM139DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM139 LM139DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM139 LM139DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM139 LM139FK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 LM139FK LM139FKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 77008012A LM139FKB LM139J ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 LM139J LM139JB ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 7700801CA LM139JB LM139N OBSOLETE PDIP N 14 TBD Call TI Call TI -55 to 125 LM139W ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type -55 to 125 LM139W LM139WB ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type -55 to 125 7700801DA LM139WB LM239AD ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM239A LM239ADE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM239A LM239ADG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM239A LM239ADR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM239A

www.ti.com 1-Jan-2016 Addendum-Page 3 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish (6) MSL Peak Temp (3) Op Temp (°C) Device Marking (4/5) Samples LM239ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM239A LM239ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM239A LM239AN OBSOLETE PDIP N 14 TBD Call TI Call TI -25 to 85 LM239D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM239 LM239DE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM239 LM239DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM239 LM239DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU | CU SN Level-1-260C-UNLIM -25 to 85 LM239 LM239DRG3 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -25 to 85 LM239 LM239DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM239 LM239N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU | CU SN N / A for Pkg Type -25 to 85 LM239N LM239NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type -25 to 85 LM239N LM239PW ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 L239 LM239PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 L239 LM239PWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU | CU SN Level-1-260C-UNLIM -25 to 85 L239 LM239PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 L239 LM239PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -25 to 85 L239 LM2901AVQDR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901AV LM2901AVQDRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901AV

www.ti.com 1-Jan-2016 Addendum-Page 4 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish (6) MSL Peak Temp (3) Op Temp (°C) Device Marking (4/5) Samples LM2901AVQPWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901AV LM2901AVQPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901AV LM2901D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901 LM2901DE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901 LM2901DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901 LM2901DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU | CU SN Level-1-260C-UNLIM -40 to 125 LM2901 LM2901DRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901 LM2901DRG3 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 LM2901 LM2901DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901 LM2901N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type -40 to 125 LM2901N LM2901NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type -40 to 125 LM2901N LM2901NSR ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901 LM2901NSRG4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2901 LM2901PW ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901 LM2901PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901 LM2901PWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI -40 to 125 LM2901PWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU | CU SN Level-1-260C-UNLIM -40 to 125 L2901 LM2901PWRG3 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 L2901

www.ti.com 1-Jan-2016 Addendum-Page 5 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish (6) MSL Peak Temp (3) Op Temp (°C) Device Marking (4/5) Samples LM2901PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901 LM2901QD OBSOLETE SOIC D 14 TBD Call TI Call TI -40 to 125 LM2901QN OBSOLETE PDIP N 14 TBD Call TI Call TI -40 to 125 LM2901VQDR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901V LM2901VQDRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901V LM2901VQPWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901V LM2901VQPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2901V LM339AD ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339A LM339ADBR ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339A LM339ADBRG4 ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339A LM339ADE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339A LM339ADG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339A LM339ADR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU | CU SN Level-1-260C-UNLIM 0 to 70 LM339A LM339ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339A LM339ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339A LM339AN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU | CU SN N / A for Pkg Type 0 to 70 LM339AN LM339ANE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 0 to 70 LM339AN LM339ANSR ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339A LM339ANSRG4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339A

www.ti.com 1-Jan-2016 Addendum-Page 6 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish (6) MSL Peak Temp (3) Op Temp (°C) Device Marking (4/5) Samples LM339APW ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339A LM339APWG4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339A LM339APWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU | CU SN Level-1-260C-UNLIM 0 to 70 L339A LM339APWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339A LM339APWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339A LM339D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339 LM339DBLE OBSOLETE SSOP DB 14 TBD Call TI Call TI 0 to 70 LM339DBR ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339 LM339DBRE4 ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339 LM339DE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339 LM339DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339 LM339DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU | CU SN Level-1-260C-UNLIM 0 to 70 LM339 LM339DRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339 LM339DRG3 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM 0 to 70 LM339 LM339DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339 LM339N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU | CU SN N / A for Pkg Type 0 to 70 LM339N LM339NE3 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU SN N / A for Pkg Type 0 to 70 LM339N LM339NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 0 to 70 LM339N LM339NSLE OBSOLETE SO NS 14 TBD Call TI Call TI 0 to 70

www.ti.com 1-Jan-2016 Addendum-Page 7 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish (6) MSL Peak Temp (3) Op Temp (°C) Device Marking (4/5) Samples LM339NSR ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339 LM339NSRG4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM339 LM339PW ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339 LM339PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339 LM339PWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI 0 to 70 LM339PWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU | CU SN Level-1-260C-UNLIM 0 to 70 L339 LM339PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339 LM339PWRG3 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM 0 to 70 L339 LM339PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 L339 LM339Y OBSOLETE 0 TBD Call TI Call TI 0 to 70 M38510/11201BCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510 /11201BCA (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)

www.ti.com 1-Jan-2016 Addendum-Page 8 (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF LM139, LM139-SP, LM239A, LM2901, LM2901AV, LM2901V :

  • Catalog: LM139
  • Automotive: LM239A-Q1 , LM2901-Q1 , LM2901AV-Q1 , LM2901V-Q1
  • Enhanced Product: LM239A-EP
  • Space: LM139-SP NOTE: Qualified Version Definitions:
  • Catalog - TI's standard catalog product
  • Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
  • Enhanced Product - Supports Defense, Aerospace and Medical Applications
  • Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application

*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Reel Diameter (mm) Reel Width W1 (mm) (mm) (mm) (mm) (mm) W (mm) Pin1 Quadrant PACKAGE MATERIALS INFORMATION www.ti.com 25-Jan-2016 Pack Materials-Page 1

(mm) Reel Width W1 (mm) (mm) (mm) (mm) (mm) W (mm) Pin1 Quadrant PACKAGE MATERIALS INFORMATION www.ti.com 25-Jan-2016 Pack Materials-Page 2

*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM139ADR SOIC D 14 2500 367.0 367.0 38.0 LM139DR SOIC D 14 2500 367.0 367.0 38.0 LM239ADR SOIC D 14 2500 367.0 367.0 38.0 LM239ADR SOIC D 14 2500 333.2 345.9 28.6 LM239DR SOIC D 14 2500 367.0 367.0 38.0 LM239DR SOIC D 14 2500 333.2 345.9 28.6 LM239DR SOIC D 14 2500 364.0 364.0 27.0 LM239DRG3 SOIC D 14 2500 364.0 364.0 27.0 LM239DRG4 SOIC D 14 2500 333.2 345.9 28.6 LM239PWR TSSOP PW 14 2000 367.0 367.0 35.0 LM2901AVQPWR TSSOP PW 14 2000 367.0 367.0 35.0 LM2901AVQPWRG4 TSSOP PW 14 2000 367.0 367.0 35.0 LM2901DR SOIC D 14 2500 367.0 367.0 38.0 LM2901DR SOIC D 14 2500 333.2 345.9 28.6 LM2901DR SOIC D 14 2500 364.0 364.0 27.0 LM2901DRG3 SOIC D 14 2500 364.0 364.0 27.0 LM2901DRG4 SOIC D 14 2500 333.2 345.9 28.6 LM2901NSR SO NS 14 2000 367.0 367.0 38.0 LM2901PWR TSSOP PW 14 2000 367.0 367.0 35.0 LM2901PWR TSSOP PW 14 2000 364.0 364.0 27.0 PACKAGE MATERIALS INFORMATION www.ti.com 25-Jan-2016 Pack Materials-Page 3

Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM2901PWRG3 TSSOP PW 14 2000 364.0 364.0 27.0 LM2901PWRG4 TSSOP PW 14 2000 367.0 367.0 35.0 LM2901VQPWR TSSOP PW 14 2000 367.0 367.0 35.0 LM2901VQPWRG4 TSSOP PW 14 2000 367.0 367.0 35.0 LM339ADBR SSOP DB 14 2000 367.0 367.0 38.0 LM339ADR SOIC D 14 2500 367.0 367.0 38.0 LM339ADR SOIC D 14 2500 333.2 345.9 28.6 LM339ADR SOIC D 14 2500 364.0 364.0 27.0 LM339ADRG4 SOIC D 14 2500 333.2 345.9 28.6 LM339ANSR SO NS 14 2000 367.0 367.0 38.0 LM339APWR TSSOP PW 14 2000 367.0 367.0 35.0 LM339APWRG4 TSSOP PW 14 2000 367.0 367.0 35.0 LM339DR SOIC D 14 2500 333.2 345.9 28.6 LM339DR SOIC D 14 2500 367.0 367.0 38.0 LM339DR SOIC D 14 2500 364.0 364.0 27.0 LM339DRG3 SOIC D 14 2500 364.0 364.0 27.0 LM339DRG4 SOIC D 14 2500 333.2 345.9 28.6 LM339PWR TSSOP PW 14 2000 367.0 367.0 35.0 LM339PWR TSSOP PW 14 2000 364.0 364.0 27.0 LM339PWRG3 TSSOP PW 14 2000 364.0 364.0 27.0 LM339PWRG4 TSSOP PW 14 2000 367.0 367.0 35.0 PACKAGE MATERIALS INFORMATION www.ti.com 25-Jan-2016 Pack Materials-Page 4

MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 4040065 /E 12/01

28 PINS SHOWN

8,20 7,40 0,55 0,95 0,25 12,90 12,30 10,50 8,50 Seating Plane 9,907,90 10,50 9,90 0,38 5,60 5,00 0,22 A 2016 6,506,50 0,05 MIN 5,905,90 DIM A MAX A MIN PINS ** 2,00 MAX 6,90 7,50 0,65 M0,15 0°–/C02578° 0,10 0,09 0,25 NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-150

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic”are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2016, Texas Instruments Incorporated