LM124 PHILIPS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Philips Semiconductors Product specification LM124/224/324/324A/ SA534/LM2902Low power quad op amps

11995 Nov 27 853-0929 16050

DESCRIPTION

The LM124/SA534/LM2902 series consists of four independent, high-gain, internally frequency-compensated operational amplifiers designed specifically to operate from a single power supply over a wide range of voltages. UNIQUE FEATURES In the linear mode, the input common-mode voltage range includes ground and the output voltage can also swing to ground, even though operated from only a single power supply voltage. The unity gain crossover frequency and the input bias current are temperature-compensated.

FEATURES

  • Internally frequency-compensated for unity gain
  • Large DC voltage gain: 100dB
  • Wide bandwidth (unity gain): 1MHz (temperature-compensated)
  • Wide power supply range Single supply: 3VDC to 30VDC or dual supplies: ±1.5VDC to ±15VDC
  • Very low supply current drain: essentially independent of supply voltage (1mW/op amp at +5VDC )
  • Low input biasing current: 45nADC (temperature-compensated)
  • Low input offset voltage: 2mVDC and offset current: 5nADC
  • Differential input voltage range equal to the power supply voltage
  • Large output voltage: 0VDC to VCC -1.5VDC swing PIN CONFIGURATION D, F, N Packages 7 8 – +1 –+4 – +2 –+3 OUTPUT 1 –INPUT 1 +INPUT 1 V + +INPUT 2 –INPUT 2 OUTPUT 2 OUTPUT 4 –INPUT 4 +INPUT 4 GND +INPUT 3 –INPUT 3 OUTPUT 3 TOP VIEW SL00065

Figure 1. Pin Configuration

ORDERING INFORMATION

DESCRIPTION TEMPERATURE RANGE ORDER CODE DWG # 14-Pin Plastic Dual In-Line Package (DIP) -55°C to +125°C LM124N SOT27-1 14-Pin Ceramic Dual In-Line Package (CERDIP) -55°C to +125°C LM124F 0581B 14-Pin Plastic Dual In-Line Package (DIP) -25°C to +85°C LM224N SOT27-1 14-Pin Ceramic Dual In-Line Package (CERDIP) -25°C to +85°C LM224F 0581B 14-Pin Plastic Small Outline (SO) Package -25°C to +85°C LM224D SOT108-1 14-Pin Plastic Dual In-Line Package (DIP) 0°C to +70°C LM324N SOT27-1 14-Pin Ceramic Dual In-Line Package (CERDIP) 0°C to +70°C LM324F 0581B 14-Pin Plastic Small Outline (SO) Package 0°C to +70°C LM324D SOT108-1 14-Pin Plastic Dual In-Line Package (DIP) 0°C to +70°C LM324AN SOT27-1 14-Pin Plastic Small Outline (SO) Package 0°C to +70°C LM324AD SOT108-1 14-Pin Plastic Dual In-Line Package (DIP) -40°C to +85°C SA534N SOT27-1 14-Pin Ceramic Dual In-Line Package (CERDIP) -40°C to +85°C SA534F 0581B 14-Pin Plastic Small Outline (SO) Package -40°C to +85°C SA534D SOT108-1 14-Pin Plastic Small Outline (SO) Package -40°C to +125°C LM2902D SOT108-1 14-Pin Plastic Dual In-Line Package (DIP) -40°C to +125°C LM2902N SOT27-1

Philips Semiconductors Product specification LM124/224/324/324A/ SA534/LM2902Low power quad op amps

1995 Nov 27 2

SYMBOL PARAMETER RATING UNIT VCC Supply voltage 32 or ±16 VDC VIN Differential input voltage 32 VDC VIN Input voltage -0.3 to +32 VDC PD Maximum power dissipation, TA=25°C (still-air)1 N package 1420 mW F package 1190 mW D package 1040 mW Output short-circuit to GND one amplifier2 ContinuousVCC <15VDC and TA=25°C Continuous IIN Input current (VIN<-0.3V)3 50 mA TA Operating ambient temperature range LM324/A 0 to +70 °C LM224 -25 to +85 °C SA534 -40 to +85 °C LM2902 -40 to +125 °C LM124 -55 to +125 °C TSTG Storage temperature range -65 to +150 °C TSOLD Lead soldering temperature (10sec max) 300 °C NOTES: 1. Derate above 25°C at the following rates: F package at 9.5mW/°C N package at 11.4mW/°C D package at 8.3mW/°C 2. Short-circuits from the output to VCC + can cause excessive heating and eventual destruction. The maximum output current is approximately 40mA, independent of the magnitude of VCC . At values of supply voltage in excess of +15VDC continuous short-circuits can exceed the power dissipation ratings and cause eventual destruction. 3. This input current will only exist when the voltage at any of the input leads is driven negative. It is due to the collector-base junction of the input PNP transistors becoming forward biased and thereby acting as input bias clamps. In addition, there is also lateral NPN parasitic transistor action on the IC chip. This action can cause the output voltages of the op amps to go to the V+ rail (or to ground for a large overdrive) during the time that the input is driven negative.

Philips Semiconductors Product specification LM124/224/324/324A/ SA534/LM2902Low power quad op amps

1995 Nov 27 3

DC ELECTRICAL CHARACTERISTICS VCC =5V, TA=25°C unless otherwise specified. SYMBOL PARAMETER TEST CONDITIONS LM124/LM224 LM324/SA534/LM2902 UNITSYMBOL PARAMETER TEST CONDITIONS Min Typ Max Min Typ Max UNIT VOS Offset voltage1 R S=0Ω ±2 ±5 ±2 ±7 mVVOS Offset voltage1 R S=0Ω , over temp. ±7 ±9 mV ΔVOS /ΔT Temperature drift R S=0Ω , over temp. 7 7 µV/°C IBIAS Input current2 IIN(+) or IIN(-) 45 150 45 250 nAIBIAS Input current2 IIN(+) or IIN(-), over temp. 40 300 40 500 nA ΔIBIAS/ΔT Temperature drift Over temp. 50 50 pA/°C IOS Offset current nAIOS Offset current IIN(+)-IIN(-), over temp. ±100 ±150 nA ΔIOS /ΔT Temperature drift Over temp. 10 10 pA/°C VCM Common-mode voltage VCC ≤30V 0 VCC -1.5 0 VCC -1.5 VVCM range3 VCC ≤30V, over temp. 0 VCC -2 0 VCC -2 V CMRR Common-mode rejection ratio VCC =30V 70 85 65 70 dB VOUT Output voltage swing R L=2kΩ , VCC =30V, over temp. 26 26 V VOH Output voltage high R L≤10kΩ , VCC =30V, over temp. 27 28 27 28 V VOL Output voltage low R L≤10kΩ , over temp. 5 20 5 20 mV ICC Supply current R L=∞ , VCC =30V, over temp. 1.5 3 1.5 3 mAICC Supply current R L=∞ , mA AVOL Large-signal voltage gain VCC =15V (for large VO swing), RL≥2kΩ 50 100 25 100 V/mVAVOL Large-signal voltage gain VCC =15V (for large VO swing), RL≥2kΩ , over temp. 25 15 V/mV Amplifier-to-amplifier coupling5 f=1kHz to 20kHz, input referred -120 -120 dB PSRR Power supply rejection ratio R S≤0Ω 65 100 65 100 dB IOUT Output current source VIN+=+1V, VIN-=0V, VCC =15V 20 40 20 40 mA IOUT VIN+=+1V, VIN-=0V, VCC =15V, over temp. 10 20 10 20 mA IOUT Output current VIN-=+1V, VIN+=0V, VCC =15V 10 20 10 20 mA sink VIN-=+1V, VIN+=0V, VCC =15V, over temp. 5 8 5 8 VIN-=+1V, VIN+=0V, VO =200mV 12 50 12 50 µA ISC Short-circuit current4 10 40 60 10 40 60 mA GBW Unity gain bandwidth 1 1 MHz SR Slew rate 0.3 0.3 V/µs VNOISE Input noise voltage f=1kHz 40 40 nV/√Hz VDIFF Differential input voltage3 VCC VCC V

Philips Semiconductors Product specification LM124/224/324/324A/ SA534/LM2902Low power quad op amps

1995 Nov 27 4

DC ELECTRICAL CHARACTERISTICS (Continued) VCC =5V, TA=25°C unless otherwise specified. SYMBOL PARAMETER TEST CONDITIONS LM324A UNITSYMBOL PARAMETER TEST CONDITIONS Min Typ Max UNIT VOS Offset voltage1 R S=0Ω ±2 ±3 mVVOS Offset voltage1 R S=0Ω , over temp. ±5 mV ΔVOS /ΔT Temperature drift R S=0Ω , over temp. 7 30 µV/°C IBIAS Input current2 IIN(+) or IIN(-) 45 100 nAIBIAS Input current2 IIN(+) or IIN(-), over temp. 40 200 nA ΔIBIAS/ΔT Temperature drift Over temp. 50 pA/°C IOS Offset current IIN(+)-IIN(-) ±5 ±30 nAIOS Offset current IIN(+)-IIN(-), over temp. ±75 nA ΔIOS /ΔT Temperature drift Over temp. 10 300 pA/°C VCM Common-mode voltage range3 VCC ≤30V 0 VCC -1.5 V VCC ≤30V, over temp. 0 VCC -2 V CMRR Common-mode rejection ratio VCC =30V 65 85 dB VOUT Output voltage swing R L=2kΩ , VCC =30V, over temp. 26 V VOH Output voltage high R L≤10kΩ , VCC =30V, over temp. 27 28 V VOL Output voltage low R L≤10kΩ , over temp. 5 20 mV ICC Supply current R L=∞ , VCC =30V, over temp. 1.5 3 mA R L=∞ , over temp. 0.7 1.2 mA AVOL Large-signal voltage gain VCC =15V (for large VO swing), RL≥2kΩ 25 100 V/mV VCC =15V (for large VO swing), RL≥2kΩ , over temp. 15 V/mV Amplifier-to-amplifier coupling5 f=1kHz to 20kHz, input referred -120 dB PSRR Power supply rejection ratio R S≤0Ω 65 100 dB Output current source VIN+=+1V, VIN-=0V, VCC =15V 20 40 mA VIN+=+1V, VIN-=0V, VCC =15V, over temp. 10 20 mA IOUT Output current VIN-=+1V, VIN+=0V, VCC =15V 10 20 mA sink VIN-=+1V, VIN+=0V, VCC =15V, over temp. 5 8 mA VIN-=+1V, VIN+=0V, VO =200mV 12 50 µA ISC Short-circuit current4 10 40 60 mA VDIFF Differential input voltage3 VCC V GBW Unity gain bandwidth 1 MHz SR Slew rate 0.3 V/µs VNOISE Input noise voltage f=1kHz 40 nV/√Hz NOTES: 1. VO ≈ 1.4VDC , RS=0Ω with VCC from 5V to 30V and over full input common-mode range (0VDC + to VCC -1.5V). 2. The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the state of the output so no loading change exists on the input lines. 3. The input common-mode voltage or either input signal voltage should not be allowed to go negative by more than 0.3V. The upper end of the common-mode voltage range is VCC -1.5, but either or both inputs can go to +32V without damage. 4. Short-circuits from the output to VCC can cause excessive heating and eventual destruction. The maximum output current is approximately 40mA independent of the magnitude of VCC . At values of supply voltage in excess of +15VDC , continuous short-circuits can exceed the power dissipation ratings and cause eventual destruction. Destructive dissipation can result from simultaneous shorts on all amplifiers. 5. Due to proximity of external components, insure that coupling is not originating via stray capacitance between these external parts. This typically can be detected as this type of coupling increases at higher frequencies.

1995 Nov 27 5

Figure 2. Equivalent Circuit

1995 Nov 27 6

Figure 3. Typical Performance Characteristics

1995 Nov 27 7

Figure 4. Typical Performance Characteristics (cont.) Figure 5. Typical Applications