LM193 PHILIPS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Philips Semiconductors Product specification LM193/A/293/A/393/A/2903Low power dual voltage comparator

11995 Nov 27 853-0932 16050

DESCRIPTION

The LM193 series consists of two independent precision voltage comparators with an offset voltage specification as low as 2.0mV max. for two comparators which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. These comparators also have a unique characteristic in that the input common-mode voltage range includes ground, even though operated from a single power supply voltage. The LM193 series was designed to directly interface with TTL and CMOS. When operated from both plus and minus power supplies, the LM193 series will directly interface with MOS logic where their low power drain is a distinct advantage over standard comparators.

FEATURES

  • Wide single supply voltage range 2.0VDC to 36VDC or dual supplies ±1.0VDC, to ±18VDC
  • Very low supply current drain (0.8mA) independent of supply voltage (2.0mW/comparator at 5.0VDC)
  • Low input biasing current 25nA
  • Low input offset current ±5nA and offset voltage ±2mV
  • Input common-mode voltage range includes ground
  • Differential input voltage range equal to the power supply voltage
  • Low output 250mV at 4mA saturation voltage
  • Output voltage compatible with TTL, DTL, ECL, MOS and CMOS logic systems

APPLICATIONS

  • A/D converters
  • Wide range VCO
  • MOS clock generator
  • High voltage logic gate
  • Multivibrators PIN CONFIGURATION 4 5 D, N, FE Packages A B TOP VIEW OUTPUT A INVERTING INPUT A NON–INVERTING INPUT A GND OUTPUT B INVERTING INPUT B NON–INVERTING INPUT B SL00079

Figure 1. Pin Configuration Figure 2. Equivalent Circuit

ORDERING INFORMATION

DESCRIPTION TEMPERATURE RANGE ORDER CODE DWG # 8-Pin Ceramic Dual In-Line Package (Cerdip) -55°C to +125°C LM193FE 0580A 8-Pin Ceramic Dual In-Line Package (Cerdip) -25°C to +85°C LM293FE 0580A 8-Pin Plastic Dual In-Line Package (DIP) -25°C to +85°C LM293N SOT97-1 8-Pin Plastic Small Outline (SO) Package -25°C to +85°C LM293D SOT96-1 8-Pin Plastic Dual In-Line Package (DIP) -25°C to +85°C LM293AN SOT97-1 8-Pin Ceramic Dual In-Line Package (Cerdip) 0 to +70°C LM393AFE 0580A 8-Pin Ceramic Dual In-Line Package (Cerdip) 0 to +70°C LM393FE 0580A 8-Pin Plastic Small Outline (SO) Package 0 to +70°C LM393D SOT96-1 8-Pin Plastic Dual In-Line Package (DIP) 0 to +70°C LM393N SOT97-1 8-Pin Plastic Dual In-Line Package (DIP) 0 to +70°C LM393AN SOT97-1 8-Pin Plastic Dual In-Line Package (DIP) -40°C to +125°C LM2903N SOT97-1 8-Pin Plastic Dual In-Line Package (DIP) -40°C to +125°C LM2903D SOT97-1

Philips Semiconductors Product specification LM193/A/293/A/393/A/2903Low power dual voltage comparator

1995 Nov 27 2

SYMBOL PARAMETER RATING UNIT VCC Supply voltage 36 or ±18 VDC Differential input voltage 36 VDC VIN Input voltage -0.3 to +36 VDC PD Maximum power dissipation, TA=25°C (still-air)1 F package N package D package 780 1160 780 mW mW mW Output short-circuit to ground2 Continuous IIN Input current (VIN<-0.3VDC )3 50 mA TA Operating temperature range LM193/193A LM293/293A LM393/393A LM2903 -55 to +125 -25 to +85 0 to +70 -40 to +125 TSTG Storage temperature range -65 to +150 °C TSOLD Lead soldering temperature (10sec max) 300 °C NOTES: 1. Derate above 25°C, at the following rates: F package at 6.2mW/°C N package at 9.3mW/°C D package at 6.2mW/°C 2. Short circuits from the output to V+ can cause excessive heating and eventual destruction. The maximum output current is approximately 20mA independent of the magnitude of V+. 3. This input current will only exist when the voltage at any of the input leads is driven negative. It is due to the collector-base junction of the input PNP transistors becoming forward biased and thereby acting as input diode clamps. In addition to this diode action, there is also lateral NPN parasitic transistor action on the IC chip. This transistor action can cause the output voltages of the comparators to go to the V+ voltage level (or to ground for a large overdrive) for the time duration that an input is driven negative. This is not destructive and normal output states will re-establish when the input voltage, which was negative, again returns to a value greater than -0.3VDC .

Philips Semiconductors Product specification LM193/A/293/A/393/A/2903Low power dual voltage comparator

1995 Nov 27 3

DC AND AC ELECTRICAL CHARACTERISTICS V+=5VDC, LM193/193A: -55°C TA ≤/n636861720000000000000000+125°C, unless otherwise specified. LM293/293A: -25°C TA ≤/n636861720000000000000000+85°C, unless otherwise specified. LM393/393A: 0°C TA ≤/n636861720000000000000000+70°C, unless otherwise specified. LM2903: -40°C TA/n636861720000000000000000≤/n636861720000000000000000+125°C, unless otherwise specified. SYMBOL PARAMETER TEST CONDITIONS LM193A LM293A/393A LM2903 UNITSYMBOL PARAMETER TEST CONDITIONS Min Typ Max Min Typ Max Min Typ Max UNIT VOS Input offset voltage2 TA=25°C Over temp. ±1.0 ±2.0 ±4.0 ±1.0 ±2.0 ±4.0 ±2.0 ±7.0 ±15 mV mV VCM Input common-mode voltage range3, 6 TA=25°C Over temp. V+-1.5 V+-2.0 V+-1.5 V+-2.0 V+-1.5 V+-2.0 V V VIDR Differential input voltage1 Keep all VINs ≥0VDC (or V- if need) V+ V+ V+ V IBIAS Input bias current4 IIN(+) or IIN(-) with output in linear range TA=25°C Over temp. 25 100 300 25 250 400 200 250 500 nA nA IOS Input offset current IIN(+)-IIN(-) TA=25°C Over temp. ±3.0 ±25 ±100 ±5.0 ±50 ±150 ±50 ±50 ±200 nA nA IOL Output sink current VIN(-)≥1VDC , VIN(+)=0, V0≤1.5VDC TA=25°C 6.0 16 6.0 16 6.0 16 mA Output leakage current V0=5VDC , TA=25°C VIN(+)≥1VDC , VIN(-)=0 V0=30VDC Over temp. 0.1 1.0 0.1 1.0 0.1 1.0 nA µA ICC Supply current R L=∞ on both comparators, TA=25°C 0.8 1 0.8 1 0.8 1 mA ICC Supply current R L=∞ on both comparators, V+=30V 1 2.5 1 2.5 1 2.5 mA AV Voltage gain R L≥15kΩ , V+=15VDC , TA=25°C 50 200 50 200 25 100 V/mV VOL Saturation voltage VIN(-)≥1VDC , VIN(+)=0, VOL Saturation voltage ISINK≤4mA VOL Saturation voltageOL TA=25°C 250 400 250 400 400 400 mV Over temp. 700 700 700 mV tLSR Large-signal response time VIN=TTL logic swing, VREF =1.4VDC VRL =5VDC , RL=5.1kΩ , TA=25°C 300 300 300 ns tR Response time5 VRL =5VDC , RL=5.1kΩ TA=25°C 1.3 1.3 1.3 µs

Philips Semiconductors Product specification LM193/A/293/A/393/A/2903Low power dual voltage comparator

1995 Nov 27 4

DC ELECTRICAL CHARACTERISTICS (Continued) V+=5VDC, LM193/193A: -55°C TA ≤/n636861720000000000000000+125°C, unless otherwise specified. LM293/293A: -25°C TA ≤/n636861720000000000000000+85°C, unless otherwise specified. LM393/393A: 0°C TA ≤/n636861720000000000000000+70°C, unless otherwise specified. LM2903: -40°C TA/n636861720000000000000000≤/n636861720000000000000000+125°C, unless otherwise specified. SYMBOL PARAMETER TEST CONDITIONS LM193 LM293/393 UNITSYMBOL PARAMETER TEST CONDITIONS Min Typ Max Min Typ Max UNIT VOS Input offset voltage2 TA=25°C Over temp. ±2.0 ±5.0 ±9.0 ±2.0 ±5.0 ±9.0 mV mV VCM Input common-mode voltage range3, 6 TA=25°C Over temp. V±-1.5 V±-2.0 V+-1.5 V+-2.0 V V VIDR Differential input voltage1 Keep all VINs ≥0VDC (or V-if need) V+ V+ V IBIAS Input bias current4 IIN(+) or IIN(-) with output in linear range TA=25°C Over temp. 25 100 300 25 250 400 nA nA IOS Input offset current IIN(+)-IIN(-) TA=25°C Over temp. ±3.0 ±25 ±100 ±5.0 ±50 ±150 nA nA IOL Output sink current VIN(-)≥1VDC , VIN(+)=0, V0≤1.5VDC TA=25°C 6.0 16 6.0 16 mA Output leakage current VIN(+)≥1VDC , VIN(-)=0, V0=5VDC TA=25°C V0=30VDC over temp. 0.1 1.0 0.1 1.0 nA µA ICC Supply current R L=∞ on both comparators, TA=25°C 0.8 1 0.8 1 mA R L=∞ on both comparators, V+=30V 2.5 2.5 mA AV Voltage gain R L≥15kΩ , V+=15VDC 50 200 50 200 V/mV VOL Saturation voltage VIN(-)≥1VDC , VIN(+)=0, ISINK≤4mA TA=25°C Over temp. 250 400 700 250 400 700 mV mV tLSR Large signal response time VIN=TTL logic swing, VREF =1.4VDC , VRL =5VDC R L=5.1kΩ , TA=25°C 300 300 ns tR Response time5 VRL =5VDC , R L=5.1kΩ TA=25°C 1.3 1.3 µs NOTES: 1. Positive excursions of input voltage may exceed the power supply level by 17V. As long as the other voltage remains within the common-mode range, the comparator will provide a proper output state. The low input voltage state must not be less than -0.3VDC (VDC below the magnitude of the negative power supply, if used). 2. At output switch point, VO ≈ 1.4VDC , RS=0Ω with V+ from 5VDC to 30VDC and over the full input common-mode range (0VDC to V+-1.5VDC ). 3. The input common-mode voltage or either input signal voltage should not be allowed to go negative by more than 0.3V. The upper end of the common-mode voltage range is V+-1.5V, but either or both inputs can go to 30VDC without damage. 4. The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the state of the output so no loading change exists on the reference or input lines. 5. The response time specified is for a 100mV input step with a 5mV overdrive. 6. For input signals that exceed VCC , only the over-driven comparator is affected. With a 5V supply, VIN should be limited to 25V maximum, and a limiting resistor should be used on all inputs that might exceed the positive supply.

1995 Nov 27 5

Input of unused comparators should be grounded. Figure 3. Equivalent Circuit

1995 Nov 27 6

Figure 4. Typical Performance Characteristics