LM160H883

LM160QML_14 TI1 | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

www.ti.com SNOSAR0A –NOVEMBER 2010–REVISED MARCH 2013 LM160QMLHighSpeedDifferentialComparator Check forSamples: LM160QML 1FEATURES DESCRIPTION The LM160 is a very high speed differentialinput, 2• Ensured High Speed: 20nS max complementaryTTL outputvoltagecomparatorwith• TightDelay Matching on Both Outputs improvedcharacteristicsovertheμA760/μA760C, for

• Complementary TTL Outputs which itisa pin-for-pinreplacement.The devicehas been optimizedforgreaterspeed, inputimpedance• High InputImpedance and fan-out,and lowerinputoffsetvoltage.Typically• Low Speed VariationwithOverdriveVariation delayvariesonly3nS foroverdrivevariationsof5mV
• Fan-Out of4 to400mV.
• Low InputOffsetVoltage Complementary outputshaving minimum skew are
• Series74 TTL Compatible provided.Applicationsinvolvehigh speed analog to digitalconvertorsand zero-crossingdetectorsindisk filesystems. Connection Diagrams Figure1. MetalCan Package See Package Number LMC0008C Pleasebe aware thatan importantnoticeconcerningavailability,standardwarranty,and use incriticalapplicationsof Texas Instrumentssemiconductorproductsand disclaimerstheretoappearsattheend ofthisdatasheet. 2Alltrademarksarethepropertyoftheirrespectiveowners. PRODUCTION DATA informationiscurrentas ofpublicationdate. Copyright© 2010–2013,Texas InstrumentsIncorporatedProductsconform to specificationsper the terms of the Texas Instrumentsstandardwarranty.Productionprocessingdoes not necessarilyincludetestingofallparameters.

SNOSAR0A –NOVEMBER 2010–REVISED MARCH 2013 www.ti.com Schematic Diagram These deviceshave limitedbuilt-inESD protection.The leadsshouldbe shortedtogetherorthedeviceplacedinconductivefoam duringstorageorhandlingtopreventelectrostaticdamage totheMOS gates.

2 SubmitDocumentationFeedback Copyright© 2010–2013,Texas InstrumentsIncorporated

ProductFolderLinks:LM160QML

www.ti.com SNOSAR0A –NOVEMBER 2010–REVISED MARCH 2013 AbsoluteMaximum Ratings(1) PositiveSupplyVoltage +8V NegativeSupplyVoltage −8V Peak OutputCurrent 20 mA DifferentialInputVoltage ±5V InputVoltage V+ ≥ VI≥ V− OperatingTemperatureRange −55°C ≤ TA ≤ +125°C StorageTemperatureRange −65°C ≤ TA ≤ +150°C ThermalResistance θJA StillAir 165°C/W

400 LF/min 67°C/W

θJC 25°C/W Lead Temperature(Soldering,10 sec.) 260°C ESD Tolerance(2) 1,600V (1) AbsoluteMaximum Ratingsindicatelimitsbeyond whichdamage tothedevicemay occur.OperatingRatingsindicateconditionsfor whichthedeviceisfunctional,butdo notensurespecificperformancelimits.Forensuredspecificationsand testconditions,see the ElectricalCharacteristics.The ensuredspecificationsapplyonlyforthetestconditionslisted.Some performancecharacteristicsmay degradewhen thedeviceisnotoperatedunderthelistedtestconditions. (2) Human body model,1.5kΩ inserieswith100 pF. QualityConformance Inspection Mil-Std-883,Method 5005 -Group A Subgroup Description Temp (°C)

1 Statictestsat +25

2 Statictestsat +125

3 Statictestsat -55

4 Dynamic testsat +25

5 Dynamic testsat +125

6 Dynamic testsat -55

7 Functionaltestsat +25

9 Switchingtestsat +25

10 Switchingtestsat +125

11 Switchingtestsat -55

12 Settlingtimeat +25

13 Settlingtimeat +125

14 Settlingtimeat -55

Copyright© 2010–2013,Texas InstrumentsIncorporated SubmitDocumentationFeedback 3 ProductFolderLinks:LM160QML

SNOSAR0A –NOVEMBER 2010–REVISED MARCH 2013 www.ti.com LM160H/883 ElectricalCharacteristicsDC Parameters Sub-Symbol Parameter Conditions Notes Min Max Unit groups VOH B Logical"1"OutputVoltage VCC ±4.5V,IO = -320µA 2.4 V 1,2,3 VOH A Logical"1"OutputVoltage VCC ±4.5V,IO = -320µA 2.4 V 1,2,3 VOL A Logical"0"OutputVoltage VCC ±4.5V,IO = 6.4mA 0.4 V 1,2,3 VOL B Logical"0"OutputVoltage VCC = 4.5V,IO = 6.4mA 0.4 V 1,2,3 IIB InputBiasCurrent VCC = ±5V,VIN = 5V 20 µA 1,2,3 ICC + PositiveSupplyCurrent VCC = ±6.5V 32 mA 1,2,3 ICC - NegativeSupplyCurrent VCC = ±6.5V -16 mA 1,2,3 IOS B ShortCircuitCurrent VCC = ±4.5V -15 -52 mA 1,2,3 IOS A ShortCircuitCurrent VCC = ±4.5V -15 -52 mA 1,2,3 VIO InputOffsetVoltage VCC = ±5V -5.0 5.0 mV 1,2,3 IIO InputOffsetCurrent VCC = ±5V -3.0 3.0 µA 1,2,3 VCC = ±5V,VIN(1)= 0,II(1) UnbalancedInputCurrent See (1) -1.0 mA 1,2,3VIN (2)= 5V VCC = ±5V,VIN (1)= 5V,II(2) UnbalancedInputCurrent See (1) -1.0 mA 1,2,3VIN (2)= 0V VCC SupplyVoltage See (1) ±4.5 ±6.5 V 1,2,3 BV CC SupplyBreakdown Voltage See (1) ±8.0 V 1,2,3 Common Mode InputVoltageVCM VCC = ±6.5V See (1) ±4.0 V 1,2,3Range VDiff DifferentialInputVoltageRange See (1) ±5.0 V 1,2,3 (1) Parametertestedgo−no−go,only. LM160H/883 ElectricalCharacteristicsAC Parameters The followingconditionsapply,unlessotherwisespecified.VCC = ±5V, ƒ = 10MHz (sinusoidal) Sub-Symbol Parameter Conditions Notes Min Max Unit groups tResp Response Time VIN = 30mV P−P See (1) 25 nS 9 tResp Response Time VIN = 2 VP−P See (1) 20 nS 9 (1) Bench test,use 70256644.

4 SubmitDocumentationFeedback Copyright© 2010–2013,Texas InstrumentsIncorporated

ProductFolderLinks:LM160QML

www.ti.com SNOSAR0A –NOVEMBER 2010–REVISED MARCH 2013 TypicalPerformance Characteristics InputCurrentvs Ambient OffsetVoltage Temperature Figure2. Figure3. Supply Currentvs Ambient InputCharacteristics Temperature Figure4. Figure5. Delay ofOutput 1 With PropagationDelay vs Respect toOutput 2 vs Ambient Temperature Ambient Temperature Figure6. Figure7. Copyright© 2010–2013,Texas InstrumentsIncorporated SubmitDocumentationFeedback 5 ProductFolderLinks:LM160QML

SNOSAR0A –NOVEMBER 2010–REVISED MARCH 2013 www.ti.com TypicalPerformance Characteristics(continued) Common-Mode Pulse Response Figure8.

6 SubmitDocumentationFeedback Copyright© 2010–2013,Texas InstrumentsIncorporated

ProductFolderLinks:LM160QML

www.ti.com SNOSAR0A –NOVEMBER 2010–REVISED MARCH 2013 AC TestCircuit VI=±50 mV FANOUT=1 FANOUT=4 V+=+5V R=2.4KΩ R=630 Ω V−=−5V C=15 pF C=30 pF Copyright© 2010–2013,Texas InstrumentsIncorporated SubmitDocumentationFeedback 7 ProductFolderLinks:LM160QML

SNOSAR0A –NOVEMBER 2010–REVISED MARCH 2013 www.ti.com

REVISION HISTORY

Released Revision Section Changes 11/30/2010 A New Release,Corporateformat 1 MDS datasheetsconvertedintoone Corp.data sheetformat.The drifttablewas eliminatedsinceit didnotapplyMNLM160-X Rev 0BL willbe archived. 03/26/2013 A AllSections Changed layoutofNationalData SheettoTIformat

8 SubmitDocumentationFeedback Copyright© 2010–2013,Texas InstrumentsIncorporated

ProductFolderLinks:LM160QML

www.ti.com 11-Apr-2013 Addendum-Page 1 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3) Op Temp (°C) Top-Side Markings (4) Samples 5962-8767401GA ACTIVE TO-99 LMC 8 20 TBD Call TI Call TI -55 to 125 LM160H/883 5962-8767401GA Q A CO 5962-8767401GA Q > T LM160H/883 ACTIVE TO-99 LMC 8 20 TBD Call TI Call TI -55 to 125 LM160H/883 5962-8767401GA Q A CO 5962-8767401GA Q > T (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Top-Side Marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

www.ti.com 11-Apr-2013 Addendum-Page 2 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

Texas InstrumentsIncorporatedand itssubsidiaries(TI)reservetherighttomake corrections,enhancements,improvementsand other changes toitssemiconductorproductsand servicesperJESD46, latestissue,and todiscontinueany productorserviceperJESD48, latest issue.Buyersshouldobtainthelatestrelevantinformationbeforeplacingordersand shouldverifythatsuch informationiscurrentand complete.Allsemiconductorproducts(alsoreferredtohereinas “components”)aresoldsubjecttoTI’s termsand conditionsofsale suppliedatthetimeoforderacknowledgment. TIwarrantsperformanceofitscomponents tothespecificationsapplicableatthetimeofsale,inaccordancewiththewarrantyinTI’s terms and conditionsofsaleofsemiconductorproducts.Testingand otherqualitycontroltechniquesareused totheextentTIdeems necessary tosupportthiswarranty.Exceptwhere mandated by applicablelaw,testingofallparametersofeach component isnotnecessarily performed. TIassumes no liabilityforapplicationsassistanceorthedesignofBuyers’products.Buyersareresponsiblefortheirproductsand applicationsusingTIcomponents.To minimizetherisksassociatedwithBuyers’productsand applications,Buyersshouldprovide adequatedesignand operatingsafeguards. TIdoes notwarrantorrepresentthatany license,eitherexpressorimplied,isgrantedunderany patentright,copyright,mask work right,or otherintellectualpropertyrightrelatingtoany combination,machine,orprocessinwhichTIcomponents orservicesareused.Information publishedby TIregardingthird-partyproductsorservicesdoes notconstitutea licensetouse such productsorservicesora warrantyor endorsementthereof.Use ofsuch informationmay requirea licensefroma thirdpartyunderthepatentsorotherintellectualpropertyofthe thirdparty,ora licensefromTIunderthepatentsorotherintellectualpropertyofTI. ReproductionofsignificantportionsofTIinformationinTIdatabooks ordatasheetsispermissibleonlyifreproductioniswithoutalteration and isaccompaniedby allassociatedwarranties,conditions,limitations,and notices.TIisnotresponsibleorliableforsuch altered documentation.Informationofthirdpartiesmay be subjecttoadditionalrestrictions. ResaleofTIcomponents orserviceswithstatementsdifferentfromorbeyond theparametersstatedby TIforthatcomponent orservice voidsallexpressand any impliedwarrantiesfortheassociatedTIcomponent orserviceand isan unfairand deceptivebusinesspractice. TIisnotresponsibleorliableforany such statements. Buyeracknowledgesand agreesthatitissolelyresponsibleforcompliancewithalllegal,regulatoryand safety-relatedrequirements concerningitsproducts,and any use ofTIcomponents initsapplications,notwithstandingany applications-relatedinformationorsupport thatmay be providedby TI.Buyerrepresentsand agreesthatithas allthenecessaryexpertisetocreateand implementsafeguardswhich anticipatedangerousconsequencesoffailures,monitorfailuresand theirconsequences,lessenthelikelihoodoffailuresthatmightcause harm and takeappropriateremedialactions.BuyerwillfullyindemnifyTIand itsrepresentativesagainstany damages arisingoutoftheuse ofany TIcomponents insafety-criticalapplications. Insome cases,TIcomponents may be promotedspecificallytofacilitatesafety-relatedapplications.Withsuch components,TI’s goalisto helpenablecustomerstodesignand createtheirown end-productsolutionsthatmeet applicablefunctionalsafetystandardsand requirements.Nonetheless,such components aresubjecttotheseterms. No TIcomponents areauthorizedforuse inFDA ClassIII(orsimilarlife-criticalmedicalequipment)unlessauthorizedofficersoftheparties have executeda specialagreementspecificallygoverningsuch use. OnlythoseTIcomponents whichTIhas specificallydesignatedas militarygradeor“enhanced plastic”aredesignedand intendedforuse in military/aerospaceapplicationsorenvironments.Buyeracknowledgesand agreesthatany militaryoraerospaceuse ofTIcomponents whichhave not been so designatedissolelyattheBuyer's risk,and thatBuyerissolelyresponsibleforcompliancewithalllegaland regulatoryrequirementsinconnectionwithsuch use. TIhas specificallydesignatedcertaincomponents as meetingISO/TS16949 requirements,mainlyforautomotiveuse.Inany case ofuse of non-designatedproducts,TIwillnotbe responsibleforany failuretomeet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotiveand Transportationwww.ti.com/automotive Amplifiers amplifier.ti.com Communicationsand Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP ® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energyand Lighting www.ti.com/energy Clocksand Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space,Avionicsand Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Videoand Imaging www.ti.com/video RFID www.ti-rfid.com OMAP ApplicationsProcessors www.ti.com/omap TIE2E Community e2e.ti.com WirelessConnectivity www.ti.com/wirelessconnectivity MailingAddress:Texas Instruments,PostOfficeBox 655303,Dallas,Texas 75265 Copyright© 2013,Texas InstrumentsIncorporated

Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments: 5962-8767401GA