LM1558J/883

LM1558QML TI1 | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

LM1558QML Dual Operational Amplifier Literature Number: SNOSAN1A

Dual Operational Amplifier General Description The LM1558 is a general purpose dual operational amplifier. The two amplifiers share a common bias network and power supply leads. Otherwise, their operation is completely inde- pendent.

Features

n No frequency compensation required n Short-circuit protection n Wide common-mode and differential voltage ranges n Low-power consumption n 8-lead can and 8-lead mini DIP n No latch up when input common mode range is exceeded

Ordering Information

NS PART NUMBER SMD PART NUMBER NS PACKAGE NUMBER PACKAGE DISCRIPTION LM1558H/883 H08C 8LD Metal Can LM1558J/883 J08A 8LD Cerdip Connection Diagrams Metal Can Package Dual-In-Line Package 20142602 Top View See NS Package Number H08C 20142603 Top View See NS Package Number J08A August 2005 LM1558QML Dual Operational Amplifier © 2005 National Semiconductor Corporation DS201426 www.national.com

Numbers in parentheses are pin numbers for amplifier B. LM1558QML www.national.com 2

Absolute Maximum Ratings(Note 1) Supply Voltage ±22V Power Dissipation (Note 2) 8LD Metal Can 500 mW 8LD CERDIP TBD Differential Input Voltage ±30V Input Voltage (Note 3) ±15V Output Short-Circuit Duration Continuous Operating Temperature Range −55˚C ≤ T A ≤ +125˚C Maximum Junction Temperature 150˚C Storage Temperature Range −65˚C ≤ T A ≤ +150˚C Lead Temperature (Soldering, 10 sec.) 260˚C Thermal Resistance θ JA Metal Can 8LD Still Air 150˚C/W 500LF/Min Air flow 85˚C/W CERDIP 8LD Still Air 125˚C/W 500LF/Min Air flow 70˚C/W θJC Metal Can 8LD 30˚C/W CERDIP 8LD 22˚C/W ESD tolerance (Note 4) 300V Quality Conformance Inspection MIL-STD-883, Method 5005 - Group A Subgroup Description Temp ( C)

1 Static tests at +25

2 Static tests at +125

3 Static tests at -55

4 Dynamic tests at +25

5 Dynamic tests at +125

6 Dynamic tests at -55

7 Functional tests at +25

8A Functional tests at +125 8B Functional tests at -55

9 Switching tests at +25

10 Switching tests at +125

11 Switching tests at -55

www.national.com3

The following conditions apply, unless otherwise specified. V CC = ±15V, VCM = 0V, RS = 10KΩ Symbol Parameter Conditions Note Min Max Unit Sub- group VIO Input Offset Voltage VCM = -12V -5.0 5.0 mV 1 -6.0 6.0 mV 2, 3 VCM = +12V -5.0 5.0 mV 1 -6.0 6.0 mV 2, 3 VCM = 0V -5.0 5.0 mV 1 -6.0 6.0 mV 2, 3 VCC = 0V, RS =5 0Ω -5.0 5.0 mV 1 -6.0 6.0 mV 2, 3 VCC = ±5V, VCM = 0V -5.0 5.0 mV 1 -6.0 6.0 mV 2, 3 IIO Input Offset Current V CM = -12V -200 200 nA 1 -500 500 nA 2, 3 VCM = +12V -200 200 nA 1 -500 500 nA 2, 3 VCM = 0V -200 200 nA 1 -500 500 nA 2, 3 VCC = ±5V, VCM = 0V -200 200 nA 1 -500 500 nA 2, 3 IIB Input Bias Current V CM = -12V 500 nA 1 1500 nA 2, 3 VCM = +12V 500 nA 1 1500 nA 2, 3 VCM = 0V 500 nA 1 1500 nA 2, 3 VCC = ±5V, VCM = 0V 500 nA 1 1500 nA 2, 3 PSRR Power Supply Rejection Ratio ±5V ≤ VCC ≤ ±15V 77 dB 1, 2, 3 CMRR Common Mode Rejection Ratio -12V ≤ VCM ≤ 12V 70 dB 1, 2, 3 ICC Power Supply Current R S =5 0Ω (both amplifiers measured together) 5.0 mA 1, 2, 7.0 mA 3 +IOS Short Circuit Current R S =5 0Ω,V O = 0V -45 -14 mA 1 -45 -9 mA 2 -50 -9 mA 3 OS Short Circuit Current R S =5 0Ω,V O =0 V 1 4 4 5 m A 1 9.0 45 mA 2 9.0 50 mA 3 V I Input Voltage Range (Note 5) -12 12 V 1, 2, 3 RI Input Resistance R I = 5(KT/q IIB) (Note 6) 0.3 M Ω 1 +VOP Output Voltage Swing R S =5 0Ω,R L = 10KΩ, VCC = ±20V 1 6 V 4 ,5 ,6 RS =5 0Ω,R L =2 KΩ, VCC = ±20V 1 5 V 4 ,5 ,6 RS =5 0Ω,R L = 10KΩ 1 2 V 4 ,5 ,6 RS =5 0Ω,R L =2 KΩ 1 0 V 4 ,5 ,6 LM1558QML www.national.com 4

DC Parameters (Continued) The following conditions apply, unless otherwise specified. V CC = ±15V, VCM = 0V, RS = 10KΩ Symbol Parameter Conditions Note Min Max Unit Sub- group -VOP Output Voltage Swing R S =5 0Ω,R L = 10KΩ, VCC = ±20V - 1 6 V 4 ,5 ,6 RS =5 0Ω,R L =2 KΩ, VCC = ±20V - 1 5 V 4 ,5 ,6 RS =5 0Ω,R L = 10KΩ - 1 2 V 4 ,5 ,6 RS =5 0Ω,R L =2 KΩ - 1 0 V 4 ,5 ,6 +AVS Large Signal Voltage Gain R S =5 0Ω,R L =2 KΩ,V O = 10V 50 V/mV 4

25 V/mV 5, 6

-AVS Large Signal Voltage Gain R S =5 0Ω,R L =2 KΩ, VO = -10V

50 V/mV 4

The following conditions apply, unless otherwise specified. V CC = ±15V, VCM =0 V Symbol Parameter Conditions Note Min Max Unit Sub- group +SR Slew Rate VI = -5 to 5V 0.2 V/µS 9 VI =- 5t o5 V ,R L =2 KΩ, CL = 100pF (Note 6) 0.2 V/µS 9 -SR Slew Rate VI = 5 to -5V 0.2 V/µS 9 VI = 5 to -5V, R L =2 KΩ, CL = 100pF (Note 6) 0.2 V/µS 9 GBW Gain Bandwidth VI = 50mVRMS, ƒ = 20KHz, RS =5 0Ω,R L =2 KΩ 250 KHz 9 tR Rise Time R L =2 KΩ,C L = 100pF (Note 6) 1 µS 9 OS Overshoot R L =2 KΩ,C L = 100pF (Note 6) 30 % 9 Note 1: “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device i s intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the ElectricalCharacteristics. The guaranteed specifications apply only for the test conditions listed. Note 2: The maximum power dissipation must be derated at elevated temperatures and is dictated by TJmax (maximum junction temperature), θJA (package junction to ambient thermal resistance), and T A (ambient temperature). The maximum allowable power dissipation at any temperature is P Dmax =( TJmax -T A)/θJA or the number given in the Absolute Maximum Ratings, whichever is lower. Note 3: For supply Voltages less than ±15V, the absolute maximum input Voltage is equal to the supply Voltage. Note 4: Human body model, 1.5 K Ω in series with 100 pF. Note 5: Guaranteed by the CMRR test. Note 6: Guaranteed parameter not tested. LM1558QML www.national.com5

Released Revision Section Originator Changes 05/24/05 A New Released Corporate format. Electrical Section R. Malone 1 MDS data sheet converted into one corp. data sheet format. MDS data MNLM1558–X, Rev. 0B0 will be achrived. Deleted Drift table from electrical section. Reason: Referenced products are 883 only. 08/04/05 B Added Thermal Resistance limit in the Absolute Maximum Ratings Section R. Malone Added Thermal Resistance limit in the Absolute Maximum Ratings Section for all packages. LM1558QML www.national.com 6

Physical Dimensions inches (millimeters) unless otherwise noted Metal Can Package (H) Ceramic Dual-In-Line Package (J) LM1558QML www.national.com7

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. For the most current product information visit us at www.national.com. LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. BANNED SUBSTANCE COMPLIANCE National Semiconductor manufactures products and uses packing materials that meet the provisions of the Customer Products Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain no ‘‘Banned Substances’’ as defined in CSP-9-111S2. Leadfree products are RoHS compliant. National Semiconductor Americas Customer Support Center Email: new.feedback@nsc.com Tel: 1-800-272-9959 National Semiconductor Europe Customer Support Center Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Français Tel: +33 (0) 1 41 91 8790 National Semiconductor Asia Pacific Customer Support Center Email: ap.support@nsc.com National Semiconductor Japan Customer Support Center Fax: 81-3-5639-7507 Email: jpn.feedback@nsc.com Tel: 81-3-5639-7560 www.national.com LM1558QML Dual Operational Amplifier

Texas InstrumentsIncorporatedand itssubsidiaries(TI)reservetherighttomake corrections,modifications,enhancements,improvements, and otherchanges toitsproductsand servicesatany timeand todiscontinueany productorservicewithoutnotice.Customersshould obtainthelatestrelevantinformationbeforeplacingordersand shouldverifythatsuch informationiscurrentand complete.Allproductsare soldsubjecttoTI’s termsand conditionsofsalesuppliedatthetimeoforderacknowledgment. TIwarrantsperformanceofitshardwareproductstothespecificationsapplicableatthetimeofsaleinaccordancewithTI’s standard warranty.Testingand otherqualitycontroltechniquesareused totheextentTIdeems necessarytosupportthiswarranty.Exceptwhere mandated by governmentrequirements,testingofallparametersofeach productisnotnecessarilyperformed. TIassumes no liabilityforapplicationsassistanceorcustomerproductdesign.Customersareresponsiblefortheirproductsand applicationsusingTIcomponents.To minimizetherisksassociatedwithcustomerproductsand applications,customersshouldprovide adequatedesignand operatingsafeguards. TIdoes notwarrantorrepresentthatany license,eitherexpressorimplied,isgrantedunderany TIpatentright,copyright,mask work right, orotherTIintellectualpropertyrightrelatingtoany combination,machine,orprocessinwhichTIproductsorservicesareused.Information publishedby TIregardingthird-partyproductsorservicesdoes notconstitutea licensefromTItouse such productsorservicesora warrantyorendorsementthereof.Use ofsuch informationmay requirea licensefroma thirdpartyunderthepatentsorotherintellectual propertyofthethirdparty,ora licensefromTIunderthepatentsorotherintellectualpropertyofTI. ReproductionofTIinformationinTIdatabooks ordatasheetsispermissibleonlyifreproductioniswithoutalterationand isaccompanied by allassociatedwarranties,conditions,limitations,and notices.Reproductionofthisinformationwithalterationisan unfairand deceptive businesspractice.TIisnotresponsibleorliableforsuch altereddocumentation.Informationofthirdpartiesmay be subjecttoadditional restrictions. ResaleofTIproductsorserviceswithstatementsdifferentfromorbeyond theparametersstatedby TIforthatproductorservicevoidsall expressand any impliedwarrantiesfortheassociatedTIproductorserviceand isan unfairand deceptivebusinesspractice.TIisnot responsibleorliableforany such statements. TIproductsarenotauthorizedforuse insafety-criticalapplications(suchas lifesupport)where a failureoftheTIproductwouldreasonably be expectedtocause severepersonalinjuryordeath,unlessofficersofthepartieshave executedan agreementspecificallygoverning such use.Buyersrepresentthattheyhave allnecessaryexpertiseinthesafetyand regulatoryramificationsoftheirapplications,and acknowledgeand agreethattheyaresolelyresponsibleforalllegal,regulatoryand safety-relatedrequirementsconcerningtheirproducts and any use ofTIproductsinsuch safety-criticalapplications,notwithstandingany applications-relatedinformationorsupportthatmay be providedby TI.Further,Buyersmust fullyindemnifyTIand itsrepresentativesagainstany damages arisingoutoftheuse ofTIproductsin such safety-criticalapplications. TIproductsareneitherdesignednorintendedforuse inmilitary/aerospaceapplicationsorenvironmentsunlesstheTIproductsare specificallydesignatedby TIas military-gradeor"enhanced plastic." Onlyproductsdesignatedby TIas military-grademeet military specifications.Buyersacknowledgeand agreethatany such use ofTIproductswhichTIhas notdesignatedas military-gradeissolelyat theBuyer's risk,and thattheyaresolelyresponsibleforcompliancewithalllegaland regulatoryrequirementsinconnectionwithsuch use. TIproductsareneitherdesignednorintendedforuse inautomotiveapplicationsorenvironmentsunlessthespecificTIproductsare designatedby TIas compliantwithISO/TS 16949 requirements.Buyersacknowledgeand agreethat,iftheyuse any non-designated productsinautomotiveapplications,TIwillnotbe responsibleforany failuretomeet such requirements. FollowingareURLs where you can obtaininformationon otherTexas Instrumentsproductsand applicationsolutions: Products Applications Audio www.ti.com/audio Communicationsand Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP ® Products www.dlp.com Energyand Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocksand Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space,Avionicsand Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportationand Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Videoand Imaging www.ti.com/video RFID www.ti-rfid.com OMAP MobileProcessors www.ti.com/omap WirelessConnectivity www.ti.com/wirelessconnectivity TIE2E Community Home Page e2e.ti.com MailingAddress:Texas Instruments,PostOfficeBox 655303,Dallas,Texas 75265 Copyright© 2011,Texas InstrumentsIncorporated