LM140JAN

LM140JAN NSC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

Features

n Complete specifications at 0.5A and 1.0A loads n No external components n Internal thermal overload protection n Internal short circuit current-limiting n Output transistor safe-area compensation

Ordering Information

NS Part Number SMD Part Number NS Package Number Package Description JL140-5BXA JM38510/10702BXA H03A 3LD TO-39 Metal Can JL140-5BYA JM38510/10706BYA K02C 2LD TO-3 Metal Can JL140-5SXA JM38510/10702SXA H03A 3LD TO-39 Metal Can JL140-5SYA JM38510/10706SYA K02C 2LD TO-3 Metal Can JL140-12BXA JM38510/10703BXA H03A 3LD TO-39 Metal Can JL140-12BYA JM38510/10707BYA K02C 2LD TO-3 Metal Can JL140-12SXA JM38510/10703SXA H03A 3LD TO-39 Metal Can JL140-15BXA JM38510/10704BXA H03A 3LD TO-39 Metal Can JL140-15BYA JM38510/10708BYA K02C 2LD TO-3 Metal Can JL140-15SYA JM38510/10708SYA K02C 2LD TO-3 Metal Can Connection Diagrams Steel Metal Can TO-39 Package (H) TO-3 Metal Can (K) 20164601 Bottom View See NS Package Number H03A 20164602 Bottom View See NS Package Number K02C February 2006 LM140JAN Three Terminal Positive Regulators © 2006 National Semiconductor Corporation DS201646 www.national.com

Absolute Maximum Ratings(Note 1) DC Input Voltage 35V Internal Power Dissipation (Note 2) Internally Limited Maximum Junction Temperature (T Jmax) 150˚C Storage Temperature Range -65˚C ≤ TA ≤ +150˚C Operating Temperature Range -55˚C ≤ TA ≤ +125˚C Lead Temperature (Soldering 10 seconds) 300˚C Thermal Resistance θ JA T0−5 (Still Air) 232˚C/W T0−5 (500 LF/Min Air Flow) 77˚C/W T0−3 (Still Air) 35˚C/W T0−3 (500 LF/Min Air Flow) TBD θ JC T0−5 15˚C/W T0−3 4˚C/W ESD Susceptibility (Note 3) 2KV Quality Conformance Inspection MIL-Std-883, Method 5005 - Group A Subgroup Description Temp ˚C

1 Static tests at 25

2 Static tests at 125

3 Static tests at -55

4 Dynamic tests at 25

5 Dynamic tests at 125

6 Dynamic tests at -55

7 Functional tests at 25

8A Functional tests at 125 8B Functional tests at -55

9 Switching tests at 25

10 Switching tests at 125

11 Switching tests at -55

12 Settling time at 25

13 Settling time at 125

14 Settling time at -55

www.national.com 2

LM140H-5.0 (JL140-5BXA, SXA) JAN Electrical Characteristics DC Parameters Symbol Parameter Conditions Notes Min Max Unit Sub- groups VO (1) Output Voltage V I = 8V, IL = -5mA 4.75 5.25 V 1, 2, 3 VI = 8V, IL = -500mA 4.75 5.25 V 1, 2, 3 VI = 20V, IL = -5mA 4.75 5.25 V 1, 2, 3 VI = 20V, IL = -500mA 4.75 5.25 V 1, 2, 3 VI = 35V, IL = -5mA 4.75 5.25 V 1, 2, 3 VI = 35V, IL = -50mA 4.75 5.25 V 1, 2, 3 VRLine Line Regulation 8V ≤ VI ≤ 35V, IL = -50mA -150 150 mV 1, 2, 3 8V ≤ VI ≤ 25V, IL = -350mA -50 50 mV 1, 2, 3 VRLoad Load Regulation V I = 10V, -500mA≤ IL ≤ -5mA -100 100 mV 1, 2, 3 VI = 35V, -50mA≤ IL ≤ -5mA -150 150 mV 1, 2, 3 ISCD Stand by Current Drain V I = 10V, IL = -5mA -7.0 -0.5 mA 1, 2, 3 VI = 35V, IL = -5mA -8.0 -0.5 mA 1, 2, 3 ∆ISCD Line Stand by I Drain vs. VLine 8V ≤ VI ≤ 35V, IL = -5mA -1.0 1.0 mA 1, 2, 3 ∆ISCD Load Stand by IDrain vs. ILoad VI = 10V, -500mA≤ IL ≤ -5mA -0.5 0.5 mA 1, 2, 3 IOL Overload Current V I = 8V, Forced∆VO = -0.48V -2.0 -0.5 A 1, 2, 3 IOS Output Short Circuit Current V I = 10V -2.0 -0.01 A 1, 2, 3 VI = 25V -1.5 -0.01 A 1, 2, 3 VI = 35V -1.0 -0.01 A 1, 2, 3 VO (2) Output Voltage V I = 10V, IL = -5mA (Note 4) 4.7 5.3 V 2 VO (3) Output Voltage V I = 10V, IL = -5mA (Note 5) 4.75 5.25 V 7, 8A, 8B ∆VO / ∆T Average Temperature Coefficient of Output Voltage VI = 10V, IL = -5mA, 25˚C ≤ TA ≤ 125˚C (Note 6) -2.0 2.0 mV/˚C 8A VI = 10V, IL = -5mA, -55˚C ≤ TA ≤ 25˚C (Note 6) -2.0 2.0 mV/˚C 8B AC Parameters Symbol Parameter Conditions Notes Min Max Unit Sub- groups NO Output Noise Voltage V I = 10V, IL = -50mA 125 µV RMS 7 ∆VO / ∆VI Transient Line Response V I = 10V, IL = -5mA, VPulse =3 V 30 mV/V 7 ∆VO / ∆IL Transient Load Response V I = 10V, ∆IL = -200mA, IL = -50mA 2.5 mV/mA 7 ∆VI / ∆VO Ripple Rejection V I = 10V, IL = -125mA, eI =1 VRMS at ƒ = 2400Hz, 60 dB 4 DC Drift Parameters Delta calculations performed on JAN S devices at group B, Subgroup 5, only. Symbol Parameter Conditions Notes Min Max Unit Sub- groups VO Output Voltage V I = 8V, IL = -5mA -0.025 0.025 V 1 VI = 8V, IL = -500mA -0.025 0.025 V 1 VI = 20V, IL = -5mA -0.025 0.025 V 1 VI = 20V, IL = -500mA -0.025 0.025 V 1 VI = 35V, IL = -5mA -0.025 0.025 V 1 VI = 35V, IL = -50mA -0.025 0.025 V 1 ISCD Stand by Current Drain V I = 10V, IL = -5mA -20 20 % 1 LM140JAN www.national.com3

LM140H-12 (JL140-12BXA, SXA) JAN Electrical Characteristics DC Parameters Symbol Parameter Conditions Notes Min Max Unit Sub- groups VO (1) Output Voltage V I = 15V, IL = -5mA 11.4 12.6 V 1, 2, 3 VI = 15V, IL = -0.5A 11.4 12.6 V 1, 2, 3 VI = 27V, IL = -5mA 11.4 12.6 V 1, 2, 3 VI = 27V, IL = -0.5A 11.4 12.6 V 1, 2, 3 VI = 35V, IL = -5mA 11.4 12.6 V 1, 2, 3 VI = 35V, IL = -50mA 11.4 12.6 V 1, 2, 3 VRLine Line Regulation 15V ≤ VI ≤ 35V, IL = -50mA -360 360 mV 1, 2, 3 15V ≤ VI ≤ 32V, IL = -350mA -120 120 mV 1, 2, 3 VRLoad Load Regulation V I = 17V, -500mA≤ IL ≤ -5mA -240 240 mV 1, 2, 3 VI = 35V, -50mA≤ IL ≤ -5mA -360 360 mV 1, 2, 3 ISCD Stand by Current Drain V I = 17V, IL = -5mA -7.0 -0.5 mA 1, 2, 3 VI = 35V, IL = -5mA -8.0 -0.5 mA 1, 2, 3 ∆ISCD Line Stand by I Drain vs. VLine 15V ≤ VI ≤ 35V, IL = -5mA -1.0 1.0 mA 1, 2, 3 ∆ISCD Load Stand by IDrain vs. ILoad VI = 17V, -500mA≤ IL ≤ -5mA -0.5 0.5 mA 1, 2, 3 IOL Over Load Current V I = 15V, ∆VO = -1.13V -2.0 -0.5 A 1, 2, 3 IOS Output Short Circuit Current V I = 17V -1.75 -0.01 A 1, 2, 3 VI = 32V -1.25 -0.01 A 1, 2, 3 VI = 35V -1.00 -0.01 A 1, 2, 3 VO (2) Output Voltage V I = 17V, IL = -5mA (Note 4) 11.28 12.72 V 2 VO (3) Output Voltage V I = 17V, IL = -5mA (Note 5) 11.4 12.6 V 7, 8A, 8B ∆VO / ∆T Average Temperature Coefficient Output Voltage VI = 17V, IL = -5mA (Note 7) -3.0 3.0 mV/˚C 8A -55˚C ≤ TA ≤ 25˚C, VI = 17V, IL = -5mA (Note 7) -3.0 3.0 mV/˚C 8B AC Parameters Symbol Parameter Conditions Notes Min Max Unit Sub- groups NO Output Noise Voltage V I = 17V, IL = -50mA 250 µV RMS 7 ∆VO / ∆IL Transient Load Response V I = 17V, IL = -50mA, ∆IL = -200mA 2.5 mV/mA 7 ∆VO / ∆VI Transient Line Response V I = 17V, VPulse = 3V, IL = -5mA 30 mV/V 7 ∆VI / ∆VO Ripple Rejection V I = 17V, IL = -125mA, eI =1 VRMS at ƒ = 2400Hz 55 dB 4 DC Drift Parameters Delta calculations performed on JAN S devices at group B, Subgroup 5, only. Symbol Parameter Conditions Notes Min Max Unit Sub- groups VO Output Voltage V I = 15V, IL = -5mA -0.06 0.06 V 1 VI = 15V, IL = -0.5A -0.06 0.06 V 1 VI = 27V, IL = -5mA -0.06 0.06 V 1 VI = 27V, IL = -0.5A -0.06 0.06 V 1 VI = 35V, IL = -5mA -0.06 0.06 V 1 VI = 35V, IL = -50mA -0.06 0.06 V 1 ISCD Stand by Current Drain V I = 17V, IL = -5mA -20 20 % 1 LM140JAN www.national.com 4

LM140H-15 (JL140-15BXA) JAN Electrical Characteristics DC Parameters Symbol Parameter Conditions Notes Min Max Unit Sub- groups VO (1) Output Voltage V I = 18.5V, IL = -5mA 14.25 15.75 V 1, 2, 3 VI = 18.5V, IL = -500mA 14.25 15.75 V 1, 2, 3 VI = 30V, IL = -5mA 14.25 15.75 V 1, 2, 3 VI = 30V, IL = -500mA 14.25 15.75 V 1, 2, 3 VI = 35V, IL = -5mA 14.25 15.75 V 1, 2, 3 VI = 35V, IL = -50mA 14.25 15.75 V 1, 2, 3 VRLine Line Regulation 18.5V ≤ VI ≤ 35V, IL = -350mA -150 150 mV 1, 2, 3 VRLOAD Load Regulation -500mA ≤ IL ≤ -5mA, VI = 20V -300 300 mV 1, 2, 3 -50mA ≤ IL ≤ -5mA, VI = 35V -450 450 mV 1, 2, 3 ISCD Stand by Current Drain V I = 20V, IL = -5mA -7.0 -0.5 mA 1, 2, 3 VI = 35V, IL = -5mA -8.0 -0.5 mA 1, 2, 3 ∆ISCD Line Stand by I Drain vs. VLine 18.5V ≤ VI ≤ 35V, IL = -5mA -1.0 1.0 mA 1, 2, 3 ∆ISCD Load Stand by IDrain vs. ILoad -500mA ≤ IL ≤ -5mA, VI = 20V -0.5 0.5 mA 1, 2, 3 IOL Overload Current Forced ∆VO = -1.43V, VI = 18.5V IOS Output Short Circuit Current V I = 20V -1.75 -0.01 A 1, 2, 3 Output Short Circuit Current V I = 35V -1.0 -0.01 A 1, 2, 3 VO (2) Output Voltage V I = 20V, IL = -5mA (Note 4) 14.1 15.9 V 2 VO (3) Output Voltage V I = 20V, IL = -5mA (Note 5) 14.25 15.75 V 7, 8A, 8B ∆VO / ∆T Average Temperature Coefficient Output Voltage VI = 20V, IL = -5mA (Note 7) -3.75 3.75 mV/˚C 8A Average Temperature Coefficient Output Voltage -55˚C ≤ TA ≤ 25˚C, VI = 20V, IL = -5mA (Note 7) -3.75 3.75 mV/˚C 8B AC Parameters Symbol Parameter Conditions Notes Min Max Unit Sub- groups NO Output Noise Voltage V I = 20V, IL = -50mA 300 µV RMS 7 ∆VO / ∆IL Transient Load Response ∆IL = -200mA, VI = 20V, IL = -50mA 2.5 mV/mA 7 ∆VO / ∆VI Transient Line Response V I = 20V, IL = -5mA, VPulse =3 V 30 mV/V 7 ∆VI / ∆VO Ripple Rejection V I = 20V, IL = -125mA, eI =1 VRMS at ƒ = 2400Hz 53 dB 4 DC Drift Parameters Delta calculations performed on JAN S devices at group B, Subgroup 5, only. Symbol Parameter Conditions Notes Min Max Unit Sub- groups VO Output Voltage V I = 18.5V, IL = -5mA -0.075 0.075 V 1 VI = 18.5V, IL = -500mA -0.075 0.075 V 1 VI = 30V, IL = -5mA -0.075 0.075 V 1 VI = 30V, IL = -500mA -0.075 0.075 V 1 VI = 35V, IL = -5mA -0.075 0.075 V 1 VI = 35V, IL = -50mA -0.075 0.075 V 1 ISCD Stand by Current Drain V I = 20V, IL = -5mA -20 20 % 1 LM140JAN www.national.com5

LM140K-5.0 (JL140-5BYA, SYA) JAN Electrical Characteristics DC Parameters Symbol Parameter Conditions Notes Min Max Unit Sub- groups VO (1) Output Voltage V I = 8V, IL = -5mA 4.75 5.25 V 1, 2, 3 VI = 8V, IL = -1A 4.75 5.25 V 1, 2, 3 VI = 20V, IL = -5mA 4.75 5.25 V 1, 2, 3 VI = 20V, IL = -1A 4.75 5.25 V 1, 2, 3 VI = 35V, IL = -5mA 4.75 5.25 V 1, 2, 3 VI = 35V, IL = -0.1A 4.75 5.25 V 1, 2, 3 VRLine Line Regulation 8V ≤ VI ≤ 35V, IL = -0.1A -150 150 mV 1, 2, 3 8V ≤ VI ≤ 25V, IL = -0.5A -50 50 mV 1, 2, 3 VRLoad Load Regulation V I = 10V, -1A≤ IL ≤ -5mA -100 100 mV 1, 2, 3 VI = 35V, -0.1A≤ IL ≤ -5mA -150 150 mV 1, 2, 3 ISCD Stand by Current Drain V I = 10V, IL = -5mA -7.0 -0.5 mA 1, 2, 3 VI = 35V, IL = -5mA -8.0 -0.5 mA 1, 2, 3 ∆ISCD Line Stand by I Drain vs. VLine 8V ≤ VI ≤ 35V, IL = -5mA -1.0 1.0 mA 1, 2, 3 ∆ISCD Load Stand by IDrain vs. ILoad VI = 10V, -1A≤ IL ≤ -5mA -0.5 0.5 mA 1, 2, 3 IOL Overload Current V I = 8V, Forced∆VO = -0.48V -4.0 -1.0 A 1, 2, 3 IOS Output Short Circuit Current V I = 10V -4.0 -0.02 A 1, 2, 3 VI = 25V -3.0 -0.02 A 1, 2, 3 VI = 35V -2.0 -0.02 A 1, 2, 3 VO (2) Output Voltage V I = 10V, IL = -5mA (Note 4) 4.7 5.3 V 2 VO (3) Output Voltage V I = 10V, IL = -5mA (Note 5) 4.75 5.25 V 7, 8A, 8B ∆VO / ∆T Average Temperature Coefficient Output Voltage VI = 10V, IL = -5mA, 25˚C ≤ TA ≤ 125˚C (Note 6) -2.0 2.0 mV/˚C 8A VI = 10V, IL = -5mA, -55˚C ≤ TA ≤ 25˚C (Note 6) -2.0 2.0 mV/˚C 8B AC Parameters Symbol Parameter Conditions Notes Min Max Unit Sub- groups NO Output Noise Voltage V I = 10V, IL = -0.1A 125 µV RMS 7 ∆VO /∆ VI Transient Line Response V I = 10V, VPulse = 3V, IL = -5mA 30 mV/V 7 ∆VO /∆ IL Transient Load Response V I = 10V, ∆IL = -400mA, IL = -100mA 2.5 mV/mA 7 ∆VI /∆ VO Ripple Rejection V I = 10V, IL = -350mA, eI =1 VRMS at ƒ = 2400Hz 60 dB 4 DC Drift Parameters Delta calculations performed on JAN S devices at group B, Subgroup 5, only. Symbol Parameter Conditions Notes Min Max Unit Sub- groups VO Output Voltage V I = 8V, IL = -5mA -0.025 0.025 V 1 VI = 8V, IL = -1A -0.025 0.025 V 1 VI = 20V, IL = -5mA -0.025 0.025 V 1 VI = 20V, IL = -1A -0.025 0.025 V 1 VI = 35V, IL = -5mA -0.025 0.025 V 1 VI = 35V, IL = -0.1A -0.025 0.025 V 1 ISCD Stand by Current Drain V I = 10V, IL = -5mA -20 20 % 1 LM140JAN www.national.com 6

LM140K-12 (JL140-12BYA) JAN Electrical Characteristics DC Parameters Symbol Parameter Conditions Notes Min Max Unit Sub- groups VO (1) Output Voltage V I = 15V, IL = -5mA 11.4 12.6 V 1, 2, 3 VI = 15V, IL = -1A 11.4 12.6 V 1, 2, 3 VI = 27V, IL = -5mA 11.4 12.6 V 1, 2, 3 VI = 27V, IL = -1A 11.4 12.6 V 1, 2, 3 VI = 35V, IL = -5mA 11.4 12.6 V 1, 2, 3 VI = 35V, IL = -0.1A 11.4 12.6 V 1, 2, 3 VRLine Line Regulation 15V ≤ VI ≤ 35V, IL = -0.1A -360 360 mV 1, 2, 3 15V ≤ VI ≤ 32V, IL = -0.5A -120 120 mV 1, 2, 3 VRLoad Load Regulation V I = 17V, -1A≤ IL ≤ -5mA -240 240 mV 1, 2, 3 VI = 35V, -0.1A≤ IL ≤ -5mA -360 360 mV 1, 2, 3 ISCD Stand by Current Drain V I = 17V, IL = -5mA -7.0 -0.5 mA 1, 2, 3 VI = 35V, IL = -5mA -8.0 -0.5 mA 1, 2, 3 ∆ISCD Line Stand by IDrain vs. VLine 15V ≤ VI ≤ 35V, IL = -5mA -1.0 1.0 mA 1, 2, 3 ∆ISCD Load Stand by IDrain vs. ILoad VI = 17V, -1A≤ IL ≤ -5mA -0.5 0.5 mA 1, 2, 3 IOL Over Load Current Forced ∆VO = -1.13V, VI = 15V -4.0 -1.0 A 1, 2, 3 IOS Output Short Circuit Current V I = 17V -3.5 -0.02 A 1, 2, 3 VI = 32V -2.5 -0.02 A 1, 2, 3 VI = 35V -2.0 -0.02 A 1, 2, 3 VO (2) Output Voltage V I = 17V, IL = -5mA (Note 4) 11.28 12.72 V 2 VO (3) Output Voltage V I = 17V, IL = -5mA (Note 5) 11.4 12.6 V 7, 8A, 8B ∆VO / ∆T Average Temperature Coefficient Output Voltage VI = 17V, IL = -5mA (Note 7) -3.0 3.0 mV/˚C 8A -55˚C ≤ TA ≤ 25˚C, VI = 17V, IL = -5mA (Note 7) -3.0 3.0 mV/˚C 8B AC Parameters Symbol Parameter Conditions Notes Min Max Unit Sup - groups NO Output Noise Voltage V I = 17V, IL = -0.1A 250 µV RMS 7 ∆VO / ∆IL Transient Load Response V I = 17V, IL = -100mA, ∆IL = -400mA 2.5 mV/mA 7 ∆VO / ∆VI Transient Line Response V I = 17V, VPulse = 3V, IL = -5mA 30 mV/V 7 ∆VI / ∆VO Ripple Rejection V I = 17V, eI =1 VRMS at ƒ = 2400Hz, IL = -350mA 55 dB 4 DC Drift Parameters Delta calculations performed on JAN S devices at group B, Subgroup 5, only. Symbol Parameter Conditions Notes Min Max Unit Sub- groups VO Output Voltage V I = 15V, IL = -5mA -0.06 0.06 V 1 VI = 15V, IL = -1A -0.06 0.06 V 1 VI = 27V, IL = -5mA -0.06 0.06 V 1 VI = 27V, IL = -1A -0.06 0.06 V 1 VI = 35V, IL = -5mA -0.06 0.06 V 1 VI = 35V, IL = -0.1A -0.06 0.06 V 1 ISCD Stand by Current Drain V I = 17V, IL = -5mA -20 20 % 1 LM140JAN www.national.com7

LM140K-15 (JL140-15BYA, SYA) JAN Electrical Characteristics DC Parameters Symbol Parameter Conditions Notes Min Max Unit Sub- groups VO (1) Output Voltage V I = 18.5V, IL = -5mA 14.25 15.75 V 1, 2, 3 VI = 18.5V, IL = -1A 14.25 15.75 V 1, 2, 3 VI = 30V, IL = -5mA 14.25 15.75 V 1, 2, 3 VI = 30V, IL = -1A 14.25 15.75 V 1, 2, 3 VI = 35V, IL = -5mA 14.25 15.75 V 1, 2, 3 VI = 35V, IL = -0.1A 14.25 15.75 V 1, 2, 3 VRLine Line Regulation 18.5V ≤ VI ≤ 35V, IL = -0.5A -150 150 mV 1, 2, 3 VRLoad Load Regulation V I = 20V, -1A≤ IL ≤ -5mA -300 300 mV 1, 2, 3 VI = 35V, -0.1A≤ IL ≤ -5mA -450 450 mV 1, 2, 3 ISCD Stand by Current Drain V I = 20V, IL = -5mA -7.0 -0.5 mA 1, 2, 3 VI = 35V, IL = -5mA -8.0 -0.5 mA 1, 2, 3 ∆ISCD Line Stand by I Drain vs. VLine 18.5V ≤ VI ≤ 35V, IL = -5mA -1.0 1.0 mA 1, 2, 3 ∆ISCD Load Stand by IDrain vs. ILoad VI = 20V, -1A≤ IL ≤ -5mA -0.5 0.5 mA 1, 2, 3 IOL Overload Current Forced ∆VO = -1.43V, VI = 18.5V IOS Output Short Circuit Current V I = 20V -3.5 -0.02 A 1, 2, 3 VI = 35V -2.0 -0.02 A 1, 2, 3 VO (2) Output Voltage V I = 20V, IL = -5mA (Note 4) 14.1 15.9 V 2 VO (3) Output Voltage V I = 20V, IL = -5mA (Note 5) 14.25 15.75 V 7, 8A, 8B ∆VO / ∆T Average Temperature Coefficient Output Voltage VI = 20V, IL = -5mA (Note 8) -3.75 3.75 mV/˚C 8A -55˚C ≤ TA ≤ 25˚C, VI = 20V, IL = -5mA (Note 8) -3.75 3.75 mV/˚C 8B AC Parameters Symbol Parameter Conditions Notes Min Max Unit Sub- groups NO Output Noise Voltage V I = 20V, IL = -0.1A 300 µV RMS 7 ∆VO / ∆IL Transient Load Response ∆IL = -400mA, VI = 20V, IL = -100mA 2.5 mV/mA 7 ∆VO / ∆VI Transient Line Response V I = 20V, VPulse = 3V, IL = -5mA 30 mV/V 7 ∆VI / ∆VO Ripple Rejection V I = 20V, IL = -350mA, eI =1 VRMS at f = 2400Hz 53 dB 4 DC Drift Parameters Delta calculations performed on JAN S devices at group B, Subgroup 5, only. Symbol Parameter Conditions Notes Min Max Unit Sub- groups VO Output Voltage V I = 18.5V, IL = -5mA -0.075 0.075 V 1 VI = 18.5V, IL = -1A -0.075 0.075 V 1 VI = 30V, IL = -5mA -0.075 0.075 V 1 VI = 30V, IL = -1A -0.075 0.075 V 1 VI = 35V, IL = -5mA -0.075 0.075 V 1 VI = 35V, IL = -0.1A -0.075 0.075 V 1 ISCD Stand by Current Drain V I = 20V, IL = -5mA -20 20 % 1 LM140JAN www.national.com 8

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. Note 2: The maximum power dissipation must be derated at elevated temperatures and is dictated by TJmax (maximum junction temperature), θJA (package junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is PDmax =( TJmax -T A)/θJA or the number given in the Absolute Maximum Ratings, whichever is lower. Note 3: Human body model, 100pF discharged through 1.5KΩ Note 4: Tested at TA = +125˚C, correlated to TA = +150˚C. Note 5: Tested at extremes as a set up for∆VO/∆T tests. Note 6: Calculated parameter. For calculations use VO @ VI = 10V, IL = −5mA.(Note 5) Note 7: Calculated parameter. For calculations use VO @ VI = 17V, IL = −5mA.(Note 5) Note 8: Calculated parameter. For calculations use VO @ VI = 20V, IL = −5mA.(Note 5) LM140JAN www.national.com9

Revision History

Released Revision Section Originator Changes 02/07/06 A New Release, Corporate format L. Lytle 6 MDS data sheets converted into one Corp. data sheet format. The drift tables were eliminated from the 883 section since it did not apply. MDS data sheets MJLM140-05-H Rev 0B0, MJLM140-05-K Rev. 0B0, MJLM140-12-H Rev 0B0, MJLM140-12-K Rev 0B0, MJLM140-15-H Rev 0B0, and MJLM140-15-K Rev 0B0 will be archived. LM140JAN www.national.com 10

Physical Dimensions inches (millimeters) unless otherwise noted Metal Can TO-39 (H) Steel Metal Can Package (K) LM140JAN www.national.com11

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. For the most current product information visit us at www.national.com. LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. BANNED SUBSTANCE COMPLIANCE National Semiconductor manufactures products and uses packing materials that meet the provisions of the Customer Products Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain no ‘‘Banned Substances’’ as defined in CSP-9-111S2. Leadfree products are RoHS compliant. National Semiconductor Americas Customer Support Center Email: new.feedback@nsc.com Tel: 1-800-272-9959 National Semiconductor Europe Customer Support Center Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Français Tel: +33 (0) 1 41 91 8790 National Semiconductor Asia Pacific Customer Support Center Email: ap.support@nsc.com National Semiconductor Japan Customer Support Center Fax: 81-3-5639-7507 Email: jpn.feedback@nsc.com Tel: 81-3-5639-7560 www.national.com LM140JAN Three Terminal Positive Regulators