LM140H-12/883

LM140H-15_883 TI1 | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

LM140QML Three Terminal Positive Regulators Literature Number: SNVS382A

April 3, 2008 LM140QML Three Terminal Positive Regulators General Description The monolithic 3-terminal positive voltage regulators employ internal current-limiting, thermal shutdown and safe-area compensation, making them essentially indestructible. If ad- equate heat sinking is provided, they can deliver over 0.5A output current. They are intended as fixed voltage regulators in a wide range of applications including local (on-card) reg- ulation for elimination of noise and distribution problems as- sociated with single-point regulation. In addition to use as fixed voltage regulators, these devices can be used with ex- ternal components to obtain adjustable output voltages and currents. Considerable effort was expended to make the entire series of regulators easy to use and minimize the number of external components. It is not necessary to bypass the output, al- though this does improve transient response. Input bypassing is needed only if the regulator is located far from the filter ca- pacitor of the power supply.

Features

■ Complete specifications at 1.0A and 0.5A loads ■ No external components ■ Internal thermal overload protection ■ Internal short circuit current-limiting ■ Output transistor safe-area compensation

Ordering Information

NS Part Number SMD Part Number NS Package Number Package Description LM140H-5.0/883 H03A 3LD TO-39 Metal Can LM140H-12/883 H03A 3LD TO-39 Metal Can LM140H-15/883 H03A 3LD TO-39 Metal Can LM140K-5.0/883 K02C 2LD TO-3 Metal Can LM140K-12/883 K02C 2LD TO-3 Metal Can LM140K-15/883 K02C 2LD TO-3 Metal Can Connection Diagrams Steel Metal Can TO-39 Package (H) 20155401 Bottom View See NS Package Number H03A TO-3 Metal Can (K) 20155402 Bottom View See NS Package Number K02C © 2008 National Semiconductor Corporation 201554 www.national.com LM140QML Three Terminal Positive Regulators

Absolute Maximum Ratings (Note 1) DC Input Voltage 35V Internal Power Dissipation (Note 2) Internally Limited Maximum Junction Temperature (TJmax) 150°C Storage Temperature Range -65°C ≤ TA ≤ +150°C Operating Temperature Range -55°C ≤ TA ≤ +125°C Lead Temperature (Soldering 10 seconds) 300°C Thermal Resistance θJA T0−39 (Still Air) 232°C/W T0−39 (500 LF/Min Air Flow) 77°C/W T0−3 (Still Air) 35°C/W T0−3 (500 LF/Min Air Flow) TBD θJC T0−39 15°C/W T0−3 4°C/W ESD Susceptibility (Note 3) 2KV Quality Conformance Inspection MIL-Std-883, Method 5005 - Group A Subgroup Description Temp °C

1 Static tests at +25

2 Static tests at +125

3 Static tests at -55

4 Dynamic tests at +25

5 Dynamic tests at +125

6 Dynamic tests at -55

7 Functional tests at +25

8A Functional tests at +125 8B Functional tests at -55

9 Switching tests at +25

10 Switching tests at +125

11 Switching tests at -55

12 Settling time at +25

13 Settling time at +125

14 Settling time at -55

www.national.com 2 LM140QML

LM140H–5.0 Electrical Characteristics DC Parameters The following conditions apply, unless otherwise specified. DC: V I = 10V, IL =350mA Symbol Parameter Conditions Notes Min Max Unit Sub- groups VO Output Voltage VI = 35V, IL = 5mA 4.75 5.75 V 1 4.80 5.20 V 1 VI = 8V 4.70 5.30 V 1, 2, 3 VI = 8V, IL = 5mA 4.70 5.30 V 1, 2, 3 VI = 20V, IL = 5mA 4.70 5.30 V 1, 2, 3 VI = 20V 4.70 5.30 V 1, 2, 3 RLine Line Regulation 7V ≤ VI ≤ 25V, IL = 200mA -50 50 mV 1 8V ≤ VI ≤ 25V, IL = 200mA -50 50 mV 2, 3 8V ≤ VI ≤ 20V, IL = 200mA -25 25 mV 1 -40 40 mV 2, 3 RLoad Load Regulation 5mA ≤ IL ≤ 500mA -50 50 mV 1 -100 100 mV 2, 3 5mA ≤ IL ≤ 200mA -25 25 mV 1 -50 50 mV 2, 3 IQ Quiescent Current 7.0 mA 1, 2, 3 ΔIQ Quiescent Current Change 8V ≤ VI ≤ 25V, IL = 200mA -0.8 0.8 mA 1, 2, 3 5mA ≤ IL ≤ 350mA -0.5 0.5 mA 1, 2, 3 IPk Peak Current VI - VO = 7V (Note 4) 0.4 2.0 A 1, 2, 3 VDO Dropout Voltage (Note 5) 2.5 V 1 IOS Short Circuit Current VI = 35V 1.0 A 1, 2, 3 AC Parameters The following conditions apply, unless otherwise specified. AC: V I = 10V, IL =350mA Symbol Parameter Conditions Notes Min Max Unit Sub- groups RR Ripple Rejection IL = 125mA, eI = 1VRMS, ƒ = 2.4KHz, VI = 10V 62 dB 4, 5, 6 3 www.national.com LM140QML

LM140H–12 Electrical Characteristics DC Parameters The following conditions apply, unless otherwise specified. DC: V I = 19V, IL =350mA Symbol Parameter Conditions Notes Min Max Unit Sub- groups VO Output Voltage VI = 35V, IL = 5mA 11.4 12.6 V 1 11.5 12.5 V 1 VI = 15.5V 11.4 12.6 V 1, 2, 3 VI = 15.5V, IL = 5mA 11.4 12.6 V 1, 2, 3 VI = 27V, IL = 5mA 11.4 12.6 V 1, 2, 3 VI = 27V 11.4 12.6 V 1, 2, 3 RLine Line Regulation 14.5V ≤ VI ≤ 30V, IL = 200mA -60 60 mV 1 15.0V ≤ VI ≤ 30V, IL = 200mA -120 120 mV 2, 3 16V ≤ VI ≤ 25V, IL = 200mA -30 30 mV 1 -60 60 mV 2, 3 RLoad Load Regulation 5mA ≤ IL ≤ 500mA -120 120 mV 1 -240 240 mV 2, 3 5mA ≤ IL ≤ 200mA -60 60 mV 1 -120 120 mV 2, 3 IQ Quiescent Current 7.0 mA 1, 2, 3 ΔIQ Quiescent Current Change 14.5V ≤ VI ≤ 30V, IL = 200mA -0.8 0.8 mA 1, 2, 3 5mA ≤ IL ≤ 350mA -0.5 0.5 mA 1, 2, 3 IPk Peak Current VI - VO = 7V (Note 4) 0.4 2.0 A 1, 2, 3 VDO Dropout Voltage (Note 5) 2.5 V 1 IOS Short Circuit Current VI = 35V 1.0 A 1, 2, 3 AC Parameters Symbol Parameter Conditions Notes Min Max Unit Sub- groups RR Ripple Rejection VI = 17V, IL = 125mA, eI = 1VRMS, ƒ = 2.4KHz 55 dB 4, 5, 6 www.national.com 4 LM140QML

LM140H–15 Electrical Characteristics DC Parameters The following conditions apply, unless otherwise specified. DC: V I = 23V, IL =350mA Symbol Parameter Conditions Notes Min Max Unit Sub- groups VO Output Voltage VI = 35V, IL = 5mA 14.25 15.75 V 1 14.40 15.60 V 1 VI = 18.5V 14.25 15.75 V 1, 2, 3 VI = 18.5V, IL = 5mA 14.25 15.75 V 1, 2, 3 VI = 30V, IL = 5mA 14.25 15.75 V 1, 2, 3 VI = 30V 14.25 15.75 V 1, 2, 3 RLine Line Regulation 17.5V ≤ VI ≤ 30V, IL = 200mA -60 60 mV 1 18.5V ≤ VI ≤ 30V, IL = 200mA -120 120 mV 2, 3 20V ≤ VI ≤ 30V, IL = 200mA -30 30 mV 1 -60 60 mV 2, 3 RLoad Load Regulation 5mA ≤ IL ≤ 500mA -150 150 mV 1 -300 300 mV 2, 3 5mA ≤ IL ≤ 200mA -75 75 mV 1 -150 150 mV 2, 3 IQ Quiescent Current 7.0 mA 1, 2, 3 ΔIQ Quiescent Current Change 17.5V ≤ VI ≤ 30V, IL = 200mA -0.8 0.8 mA 1, 2, 3 5mA ≤ IL ≤ 350mA -0.5 0.5 mA 1, 2, 3 IPk Peak Current VI - VO = 7V (Note 4) 0.4 2.0 A 1, 2, 3 VDO Dropout Voltage (Note 5) 2.5 V 1 IOS Short Circuit Current VI = 35V 1.0 A 1, 2, 3 AC Parameters The following conditions apply, unless otherwise specified. AC: V I = 23V, IL =350mA Symbol Parameter Conditions Notes Min Max Unit Sub- groups RR Ripple Rejection VI=20V, IL=125mA, eI=1VRMS, ƒ = 2.4KHz 54 dB 4, 5, 6 5 www.national.com LM140QML

LM140K–5.0 Electrical Characteristics DC Parameters The following conditions apply, unless otherwise specified. DC: V I = 10V, IL = 5mA Symbol Parameter Conditions Notes Min Max Unit Sub- groups IQ Quiescent Current IL = 1A 6.0 mA 1 7.0 mA 2, 3 ΔQ Quiescent Current Change IL = 1A, 8V ≤ VI ≤ 20mA -0.8 0.8 mA 1 IL ≤ 500mA, 8V ≤ VI ≤ 25V -0.8 0.8 mA 1, 2, 3 5mA, ≤ IL ≤ 1.0A -0.5 0.5 mA 1, 2, 3 VO Output Voltage 4.80 5.20 V 1 VI = 8V 4.75 5.25 V 1, 2, 3 VI = 8V, IL = 1A 4.75 5.25 V 1, 2, 3 VI = 20V 4.75 5.25 V 1, 2, 3 VI = 20V, IL = 1A 4.75 5.25 V 1, 2, 3 RLine Line Regulation IL = 500mA, 7V ≤ VI ≤ 25V -50 50 mV 1, 2, 3 IL = 1A, 7.3V ≤ VI ≤ 20V -50 50 mV 1 IL = 1A, 8.0V ≤ VI ≤ 20V -50 50 mV 2, 3 IL = 1A, 8V ≤ VI ≤ 12V -25 25 mV 1, 2, 3 RLoad Load Regulation 5mA ≤ IL ≤ 1.5A -50 50 mV 1 5mA ≤ IL ≤ 1.0A -50 50 mV 2, 3 250mA ≤ IL ≤ 750mA -25 25 mV 1 IOS Current Limit -4.0 -0.02 A 1 VI = 35V -2.0 -0.02 A 1 AC Parameters The following conditions apply, unless otherwise specified. AC: V I = 10V, IL = 5mA Symbol Parameter Conditions Notes Min Max Unit Sub- groups RR Ripple Rejection ƒ = 120Hz, IL = 350mA, eI = 1VRMS 68 dB 4 www.national.com 6 LM140QML

LM140K–12 Electrical Characteristics DC Parameters The following conditions apply, unless otherwise specified. DC: V I = 19V, IL = 5mA Symbol Parameter Conditions Notes Min Max Unit Sub- groups IQ Quiescent Current IL = 1A 6.0 mA 1 7.0 mA 2, 3 ΔIQ Quiescent Current Change IL = 1A, 15.5V ≤ VI ≤ 27V -0.8 0.8 mA 1 IL = 500mA 15V ≤ VI ≤ 30V -0.8 0.8 mA 1, 2, 3 5mA ≤ IL ≤ 1A -0.5 0.5 mA 1, 2, 3 VO Output Voltage 11.5 12.5 V 1 VI = 15.5V 11.4 12.6 V 1, 2, 3 VI = 15.5V, IL = 1A 11.4 12.6 V 1, 2, 3 VI = 27V 11.4 12.6 V 1, 2, 3 VI = 27V, IL = 1A 11.4 12.6 V 1, 2, 3 RLine Line Regulation IL = 500mA, 14.5V ≤ VI ≤ 25V -120 120 mV 1, 2, 3 IL = 1A, 14.6V ≤ VI ≤ 27V -120 120 mV 1 IL = 1A, 15.0V ≤ VI ≤ 27V -120 120 mV 2, 3 IL = 1A, 16V ≤ VI ≤ 22V -60 60 mV 1, 2, 3 RLoad Load Regulation 5mA ≤ IL ≤ 1.5A -120 120 mV 1 5mA ≤ IL ≤ 1.0A -120 120 mV 2, 3 250mA ≤ IL ≤ 750mA -60 60 mV 1 IOS Current Limit VI = 17V -3.5 -0.02 A 1 VI = 35V -2.0 -0.02 A 1 AC Parameters The following conditions apply, unless otherwise specified. AC: V I = 19V, IL = 5mA Symbol Parameter Conditions Notes Min Max Unit Sub- groups RR Ripple Rejection ƒ = 120Hz, IL = 350mA, eI = 1VRMS 61 dB 4 7 www.national.com LM140QML

LM140K–15 Electrical Characteristics DC Parameters The following conditions apply, unless otherwise specified. DC: V I = 23V, IL = 5mA Symbol Parameter Conditions Notes Min Max Unit Sub- groups IQ Quiescent Current IL = 1A 6.0 mA 1 7.0 mA 2, 3 ΔIQ Quiescent Current Change IL = 1A, 18.5V ≤ VI ≤ 30V -0.8 0.8 mA 1 IL = 500mA, 18.5V ≤ VI ≤ 30V -0.8 0.8 mA 2, 3 5mA ≤ IL ≤ 1A -0.5 0.5 mA 1, 2, 3 VO Output Voltage 14.4 15.6 V 1 VI = 18.5V 14.25 15.75 V 1, 2, 3 VI = 18.5V, IL = 1A 14.25 15.75 V 1, 2, 3 VI = 30V 14.25 15.75 V 1, 2, 3 VI = 30V, IL = 1A 14.25 15.75 V 1, 2, 3 RLine Line Regulation IL = 500mA, 17.5V ≤ VI ≤ 30V -150 150 mV 1 IL = 500mA, 18.5V ≤ VI ≤ 30V -150 150 mV 2, 3 IL = 1A, 17.7V ≤ VI ≤ 30V -75 75 mV 1 IL = 1A, 20V ≤ VI ≤ 26V -75 75 mV 1, 2, 3 RLoad Load Regulation 5mA ≤ IL ≤ 1.5A -150 150 mV 1 5mA ≤ IL ≤ 1.0A -150 150 mV 2, 3 250mA ≤ IL ≤ 750mA -75 75 mV 1 IOS Current Limit VI = 20V -3.5 -0.02 A 1 VI =35V -2.0 -0.02 A 1 AC Parameters The following conditions apply, unless otherwise specified. AC: V I = 23V, IL = 5mA Symbol Parameter Conditions Notes Min Max Unit Sub- groups RR Ripple Rejection ƒ = 120Hz, IL = 350mA, eI = 1VRMS 60 dB 4 Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. Note 2: The maximum power dissipation must be derated at elevated temperatures and is dictated by TJmax (maximum junction temperature), θJA (package junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is PDmax = (TJmax - TA)/ θJA or the number given in the Absolute Maximum Ratings, whichever is lower. Note 3: Human body model, 100pF discharged through 1.5KΩ Note 4: VO is set to 90% VRef Note 5: VDO = VI − VO when VO is 95% of VRef. www.national.com 8 LM140QML

Released Revision Section Originator Changes 02/21/06 A New Release, Corporate format L. Lytle 6 MDS data sheets converted into one Corp. data sheet format. The drift tables were eliminated from the 883 section since it did not apply. MDS data sheets MNLM140-05H Rev 0B0, MNLM140-05-K Rev. 0C0, MNLM140-12H Rev 0A0, MNLM140-12K Rev 0B0, MNLM140-15H Rev 0A0, and MNLM140-15K Rev 0B0 will be archived. 9 www.national.com LM140QML

Physical Dimensions inches (millimeters) unless otherwise noted Metal Can TO-39 (H) Steel Metal Can Package (K) www.national.com 10 LM140QML

11 www.national.com LM140QML

LM140QML Three Terminal Positive Regulators For more National Semiconductor product information and proven design tools, visit the following Web sites at: Products Design Support Amplifiers www.national.com/amplifiers WEBENCH www.national.com/webench Audio www.national.com/audio Analog University www.national.com/AU Clock Conditioners www.national.com/timing App Notes www.national.com/appnotes Data Converters www.national.com/adc Distributors www.national.com/contacts Displays www.national.com/displays Green Compliance www.national.com/quality/green Ethernet www.national.com/ethernet Packaging www.national.com/packaging Interface www.national.com/interface Quality and Reliability www.national.com/quality LVDS www.national.com/lvds Reference Designs www.national.com/refdesigns Power Management www.national.com/power Feedback www.national.com/feedback Switching Regulators www.national.com/switchers LDOs www.national.com/ldo LED Lighting www.national.com/led PowerWise www.national.com/powerwise Serial Digital Interface (SDI) www.national.com/sdi Temperature Sensors www.national.com/tempsensors Wireless (PLL/VCO) www.national.com/wireless THE CONTENTS OF THIS DOCUMENT ARE PROVIDED IN CONNECTION WITH NATIONAL SEMICONDUCTOR CORPORATION (“NATIONAL”) PRODUCTS. NATIONAL MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY OR COMPLETENESS OF THE CONTENTS OF THIS PUBLICATION AND RESERVES THE RIGHT TO MAKE CHANGES TO SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY TIME WITHOUT NOTICE. NO LICENSE, WHETHER EXPRESS, IMPLIED, ARISING BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. TESTING AND OTHER QUALITY CONTROLS ARE USED TO THE EXTENT NATIONAL DEEMS NECESSARY TO SUPPORT NATIONAL’S PRODUCT WARRANTY. EXCEPT WHERE MANDATED BY GOVERNMENT REQUIREMENTS, TESTING OF ALL PARAMETERS OF EACH PRODUCT IS NOT NECESSARILY PERFORMED. NATIONAL ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR BUYER PRODUCT DESIGN. BUYERS ARE RESPONSIBLE FOR THEIR PRODUCTS AND APPLICATIONS USING NATIONAL COMPONENTS. PRIOR TO USING OR DISTRIBUTING ANY PRODUCTS THAT INCLUDE NATIONAL COMPONENTS, BUYERS SHOULD PROVIDE ADEQUATE DESIGN, TESTING AND OPERATING SAFEGUARDS. EXCEPT AS PROVIDED IN NATIONAL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NATIONAL ASSUMES NO LIABILITY WHATSOEVER, AND NATIONAL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE SALE AND/OR USE OF NATIONAL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. National Semiconductor and the National Semiconductor logo are registered trademarks of National Semiconductor Corporation. All other brand or product names may be trademarks or registered trademarks of their respective holders. Copyright© 2008 National Semiconductor Corporation For the most current product information visit us at www.national.com National Semiconductor Americas Technical Support Center Email: new.feedback@nsc.com Tel: 1-800-272-9959 National Semiconductor Europe Technical Support Center Email: europe.support@nsc.com German Tel: +49 (0) 180 5010 771 English Tel: +44 (0) 870 850 4288 National Semiconductor Asia Pacific Technical Support Center Email: ap.support@nsc.com National Semiconductor Japan Technical Support Center Email: jpn.feedback@nsc.com www.national.com

Texas InstrumentsIncorporatedand itssubsidiaries(TI)reservetherighttomake corrections,modifications,enhancements,improvements, and otherchanges toitsproductsand servicesatany timeand todiscontinueany productorservicewithoutnotice.Customersshould obtainthelatestrelevantinformationbeforeplacingordersand shouldverifythatsuch informationiscurrentand complete.Allproductsare soldsubjecttoTI’s termsand conditionsofsalesuppliedatthetimeoforderacknowledgment. TIwarrantsperformanceofitshardwareproductstothespecificationsapplicableatthetimeofsaleinaccordancewithTI’s standard warranty.Testingand otherqualitycontroltechniquesareused totheextentTIdeems necessarytosupportthiswarranty.Exceptwhere mandated by governmentrequirements,testingofallparametersofeach productisnotnecessarilyperformed. TIassumes no liabilityforapplicationsassistanceorcustomerproductdesign.Customersareresponsiblefortheirproductsand applicationsusingTIcomponents.To minimizetherisksassociatedwithcustomerproductsand applications,customersshouldprovide adequatedesignand operatingsafeguards. TIdoes notwarrantorrepresentthatany license,eitherexpressorimplied,isgrantedunderany TIpatentright,copyright,mask work right, orotherTIintellectualpropertyrightrelatingtoany combination,machine,orprocessinwhichTIproductsorservicesareused.Information publishedby TIregardingthird-partyproductsorservicesdoes notconstitutea licensefromTItouse such productsorservicesora warrantyorendorsementthereof.Use ofsuch informationmay requirea licensefroma thirdpartyunderthepatentsorotherintellectual propertyofthethirdparty,ora licensefromTIunderthepatentsorotherintellectualpropertyofTI. ReproductionofTIinformationinTIdatabooks ordatasheetsispermissibleonlyifreproductioniswithoutalterationand isaccompanied by allassociatedwarranties,conditions,limitations,and notices.Reproductionofthisinformationwithalterationisan unfairand deceptive businesspractice.TIisnotresponsibleorliableforsuch altereddocumentation.Informationofthirdpartiesmay be subjecttoadditional restrictions. ResaleofTIproductsorserviceswithstatementsdifferentfromorbeyond theparametersstatedby TIforthatproductorservicevoidsall expressand any impliedwarrantiesfortheassociatedTIproductorserviceand isan unfairand deceptivebusinesspractice.TIisnot responsibleorliableforany such statements. TIproductsarenotauthorizedforuse insafety-criticalapplications(suchas lifesupport)where a failureoftheTIproductwouldreasonably be expectedtocause severepersonalinjuryordeath,unlessofficersofthepartieshave executedan agreementspecificallygoverning such use.Buyersrepresentthattheyhave allnecessaryexpertiseinthesafetyand regulatoryramificationsoftheirapplications,and acknowledgeand agreethattheyaresolelyresponsibleforalllegal,regulatoryand safety-relatedrequirementsconcerningtheirproducts and any use ofTIproductsinsuch safety-criticalapplications,notwithstandingany applications-relatedinformationorsupportthatmay be providedby TI.Further,Buyersmust fullyindemnifyTIand itsrepresentativesagainstany damages arisingoutoftheuse ofTIproductsin such safety-criticalapplications. TIproductsareneitherdesignednorintendedforuse inmilitary/aerospaceapplicationsorenvironmentsunlesstheTIproductsare specificallydesignatedby TIas military-gradeor"enhanced plastic." Onlyproductsdesignatedby TIas military-grademeet military specifications.Buyersacknowledgeand agreethatany such use ofTIproductswhichTIhas notdesignatedas military-gradeissolelyat theBuyer's risk,and thattheyaresolelyresponsibleforcompliancewithalllegaland regulatoryrequirementsinconnectionwithsuch use. TIproductsareneitherdesignednorintendedforuse inautomotiveapplicationsorenvironmentsunlessthespecificTIproductsare designatedby TIas compliantwithISO/TS 16949 requirements.Buyersacknowledgeand agreethat,iftheyuse any non-designated productsinautomotiveapplications,TIwillnotbe responsibleforany failuretomeet such requirements. FollowingareURLs where you can obtaininformationon otherTexas Instrumentsproductsand applicationsolutions: Products Applications Audio www.ti.com/audio Communicationsand Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP ® Products www.dlp.com Energyand Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocksand Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space,Avionicsand Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportationand Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Videoand Imaging www.ti.com/video RFID www.ti-rfid.com OMAP MobileProcessors www.ti.com/omap WirelessConnectivity www.ti.com/wirelessconnectivity TIE2E Community Home Page e2e.ti.com MailingAddress:Texas Instruments,PostOfficeBox 655303,Dallas,Texas 75265 Copyright© 2011,Texas InstrumentsIncorporated