LM340T-5 TI1 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 28
Technical content
3-terminal positive voltage regulators employ internal• Output Voltage Tolerances of ±2% at Tj = 25°C current-limiting, thermal shutdown and safe-areaand ±4% Over the Temperature Range compensation, making them essentially indestructible.
- Internal Thermal Overload Protection single-point regulation. In addition to use as fixed voltage regulators, these devices can be used with• Internal Short-circuit Current Limit external components to obtain adjustable output• Output Transistor Safe Area Protection voltages and currents.• P+ Product Enhancement Tested Considerable effort was expended to make the entire series of regulators easy to use and minimize the number of external components. It is not necessary to bypass the output, although this does improve transient response. Input bypassing is needed only if the regulator is located far from the filter capacitor of the power supply. The 5V, 12V, and 15V regulator options are available in the steel TO-3 power package. The LM340A/LM340-N/LM78XXC series is available in the TO-220 plastic power package, and the LM340-N-5.0 is available in the SOT-223 package, as well as the LM340-5.0 and LM340-12 in the surface-mount DDPAK/TO-263 package. Typical Applications *Required if the regulator is located far from the power supply filter. **Although no output capacitor is needed for stability, it does help transient response. (If needed, use 0.1 μF, ceramic disc). VOUT = 5V + (5V/R1 + IQ) R2 5V/R1 > 3 IQ, load regulation (Lr) ≈ [(R1 + R2)/R1] (Lr of LM340-5).
Figure 1. Fixed Output Regulator Figure 2. Adjustable Output Regulator Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. 2All trademarks are the property of their respective owners. necessarily include testing of all parameters.
ΔIQ = 1.3 mA over line and load changes. Figure 3. Current Regulator Figure 4. Comparison between SOT-223 and Figure 5. DDPAK/TO-263 Surface-Mount Package Figure 6. 3-Lead SOT-223 during storage or handling to prevent electrostatic damage to the MOS gates. LM140K may also be procured as JAN devices on slash sheet JM38510/107. 37°C/W; and with 1.6 or more inches of copper area, θJA is 32°C/W. (5) ESD rating is based on the human body model, 100 pF discharged through 1.5 kΩ.
2 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated
LM340-N, LM78xx www.ti.com SNOSBT0J – FEBRUARY 2000– REVISED DECEMBER 2013 Operating Conditions(1) (continued) LM140 −55°C to +125°C Temperature Range (TA)(2) LM340A, LM340-N 0°C to +125°C LM7808C 0°C to +125°C (2) The maximum allowable power dissipation at any ambient temperature is a function of the maximum junction temperature for operation (TJMAX = 125°C or 150°C), the junction-to-ambient thermal resistance (θJA), and the ambient temperature (TA). PDMAX = (TJMAX − TA)/θJA. If this dissipation is exceeded, the die temperature will rise above TJMAX and the electrical specifications do not apply. If the die temperature rises above 150°C, the device will go into thermal shutdown. For the TO-3 package (NDS), the junction-to-ambient thermal resistance (θJA) is 39°C/W. When using a heatsink, θJA is the sum of the 4°C/W junction-to-case thermal resistance (θJC) of the TO-3 package and the case-to-ambient thermal resistance of the heatsink. For the TO-220 package (NDE), θJA is 54°C/W and θJC is 4°C/W. If SOT-223 is used, the junction-to-ambient thermal resistance is 174°C/W and can be reduced by a heatsink (see Applications Hints on heatsinking).If the DDPAK\\TO-263 package is used, the thermal resistance can be reduced by increasing the PC board copper area thermally connected to the package: Using 0.5 square inches of copper area, θJA is 50°C/W; with 1 square inch of copper area, θJAis 37°C/W; and with 1.6 or more inches of copper area, θJA is 32°C/W. Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback 3 Product Folder Links: LM340-N LM78xx
LM340-N, LM78xx SNOSBT0J – FEBRUARY 2000– REVISED DECEMBER 2013 www.ti.com IOUT = 1A, 0°C ≤ TJ ≤ + 125°C (LM340A) unless otherwise specified(1) Output Voltage 5V 12V 15V Symbol Input Voltage (unless otherwise noted) 10V 19V 23V Units Parameter Conditions Min Typ Max Min Typ Max Min Typ Max VMIN ≤ VIN ≤ VMAX (7.5 ≤ VIN ≤ 20) (14.8 ≤ VIN ≤ 27) (17.9 ≤ VIN ≤ 30) V ΔVO Line IO = 500 mA 10 18 22 mV Regulation ΔVIN (7.5 ≤ VIN ≤ 20) (14.8 ≤ VIN ≤ 27) (17.9 ≤ VIN ≤ 30) V TJ = 25°C 3 10 4 18 4 22 mV TJ = 25°C 4 9 10 mV Over Temperature 12 30 30 mV ΔVIN (8 ≤ VIN ≤ 12) (16 ≤ VIN ≤ 22) (20 ≤ VIN ≤ 26) V ΔVO Load TJ = 5 mA ≤ IO ≤ 1.5A 10 25 12 32 12 35 mV Regulation 25°C 250 mA ≤ IO ≤ 15 19 21 mV 750 mA Over Temperature, 25 60 75 mV 5 mA ≤ IO ≤ 1A IQ Quiescent TJ = 25°C 6 6 6 mA Current Over Temperature 6.5 6.5 6.5 mA ΔIQ Quiescent 5 mA ≤ IO ≤ 1A 0.5 0.5 0.5 mA Current TJ = 25°C, IO = 1A 0.8 0.8 0.8 mAChange VMIN ≤ VIN ≤ VMAX (7.5 ≤ VIN ≤ 20) (14.8 ≤ VIN ≤ 27) (17.9 ≤ VIN ≤ 30) V IO = 500 mA 0.8 0.8 0.8 mA VMIN ≤ VIN ≤ VMAX (8 ≤ VIN ≤ 25) (15 ≤ VIN ≤ 30) (17.9 ≤ VIN ≤ 30) V VN Output Noise TA = 25°C, 10 Hz ≤ f ≤ 100 40 75 90 μV Voltage kHz Ripple TJ = 25°C, f = 120 Hz, IO = 68 80 61 72 60 70 dB Rejection 1A or f = 120 Hz, IO = 500 mA, 68 61 60 dB Over Temperature, VMIN ≤ VIN ≤ VMAX (8 ≤ VIN ≤ 18) (15 ≤ VIN ≤ 25) (18.5 ≤ VIN ≤ 28.5) V RO Dropout TJ = 25°C, IO = 1A 2.0 2.0 2.0 V Voltage Output f = 1 kHz 8 18 19 mΩ Resistance Short-Circuit TJ = 25°C 2.1 1.5 1.2 A Current Peak Output TJ = 25°C 2.4 2.4 2.4 A Current Average TC Min, TJ = 0°C, IO = 5 mA −0.6 −1.5 −1.8 mV/°C of VO VIN Input Voltage TJ = 25°C Required to 7.5 14.5 17.5 VMaintain Line Regulation (1) All characteristics are measured with a 0.22 μF capacitor from input to ground and a 0.1 μF capacitor from output to ground. All characteristics except noise voltage and ripple rejection ratio are measured using pulse techniques (tw ≤ 10 ms, duty cycle ≤ 5%). Output voltage changes due to changes in internal temperature must be taken into account separately.
4 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LM340-N LM78xx
LM340-N, LM78xx www.ti.com SNOSBT0J – FEBRUARY 2000– REVISED DECEMBER 2013 −55°C ≤ TJ ≤ +150°C unless otherwise specified Output Voltage 5V 12V 15V Symb Input Voltage (unless otherwise noted) 10V 19V 23V Unitsol Parameter Conditions Min Typ Max Min Typ Max Min Typ Max VMIN ≤ VIN ≤ VMAX (8 ≤ VIN ≤ 20) (15.5 ≤ VIN ≤ 27) (18.5 ≤ VIN ≤ 30) V ΔVO Line IO = 500 TJ = 25°C 3 50 4 120 4 150 mV Regulation mA ΔVIN (7 ≤ VIN ≤ 25) (14.5 ≤ VIN ≤ 30) (17.5 ≤ VIN ≤ 30) V −55°C ≤ TJ ≤ 50 120 150 mV +150°C ΔVIN (8 ≤ VIN ≤ 20) (15 ≤ VIN ≤ 27) (18.5 ≤ VIN ≤ 30) V IO ≤ 1A TJ = 25°C 50 120 150 mV −55°C ≤ TJ ≤ 25 60 75 mV +150°C ΔVIN (8 ≤ VIN ≤ 12) (16 ≤ VIN ≤ 22) (20 ≤ VIN ≤ 26) V ΔVO Load TJ = 5 mA ≤ IO ≤ 10 50 12 120 12 150 mV Regulation 25°C 1.5A 250 mA ≤ IP ≤ 25 60 75 mV 750 mA −55°C ≤ TJ ≤ +150°C, 50 120 150 mV 5 mA ≤ IO ≤ 1A IQ Quiescent IO ≤ 1A TJ = 25°C 6 6 6 mA Current −55°C ≤ TJ ≤ 7 7 7 mA +150°C ΔIQ Quiescent 5 mA ≤ IO ≤ 1A 0.5 0.5 0.5 mA Current TJ = 25°C, IO ≤ 1A 0.8 0.8 0.8 mAChange VMIN ≤ VIN ≤ VMAX (8 ≤ VIN ≤ 20) (15 ≤ VIN ≤ 27) (18.5 ≤ VIN ≤ 30) V IO = 500 mA, −55°C ≤ TJ ≤ 0.8 0.8 0.8 mA +150°C VMIN ≤ VIN ≤ VMAX (8 ≤ VIN ≤ 25) (15 ≤ VIN ≤ 30) (18.5 ≤ VIN ≤ 30) V VN Output Noise TA = 25°C, 10 Hz ≤ f ≤ 100 40 75 90 μV Voltage kHz Ripple f = 120 IO ≤ 1A, TJ = 68 80 61 72 60 70 dB Rejection Hz 25°C or IO ≤ 500 mA, 68 61 60 dB −55°C ≤ TJ ≤+150°C VMIN ≤ VIN ≤ VMAX (8 ≤ VIN ≤ 18) (15 ≤ VIN ≤ 25) (18.5 ≤ VIN ≤ 28.5) V RO Dropout TJ = 25°C, IO = 1A 2.0 2.0 2.0 V Voltage Output f = 1 kHz 8 18 19 mΩ Resistance Short-Circuit TJ = 25°C 2.1 1.5 1.2 A Current Peak Output TJ = 25°C 2.4 2.4 2.4 A Current Average TC of 0°C ≤ TJ ≤ +150°C, IO = 5 −0.6 −1.5 −1.8 mV/°C VOUT mA (1) All characteristics are measured with a 0.22 μF capacitor from input to ground and a 0.1 μF capacitor from output to ground. All characteristics except noise voltage and ripple rejection ratio are measured using pulse techniques (tw ≤ 10 ms, duty cycle ≤ 5%). Output voltage changes due to changes in internal temperature must be taken into account separately. Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback 5 Product Folder Links: LM340-N LM78xx
LM340-N, LM78xx SNOSBT0J – FEBRUARY 2000– REVISED DECEMBER 2013 www.ti.com −55°C ≤ TJ ≤ +150°C unless otherwise specified Output Voltage 5V 12V 15V Symb Input Voltage (unless otherwise noted) 10V 19V 23V Unitsol Parameter Conditions Min Typ Max Min Typ Max Min Typ Max VIN Input Voltage TJ = 25°C, IO ≤ 1A Required to 7.5 14.6 17.7 VMaintain Line Regulation 0°C ≤ TJ ≤ +125°C unless otherwise specified Output Voltage 5V 12V 15V Symbol Input Voltage (unless otherwise noted) 10V 19V 23V Units Parameter Conditions Min Typ Max Min Typ Max Min Typ Max VMIN ≤ VIN ≤ VMAX (7.5 ≤ VIN ≤ 20) (14.5 ≤ VIN ≤ 27) (17.5 ≤ VIN ≤ 30) V ΔVO Line Regulation IO = 500 TJ = 25°C 3 50 4 120 4 150 mV mA ΔVIN (7 ≤ VIN ≤ 25) (14.5 ≤ VIN ≤ 30) (17.5 ≤ VIN ≤ 30) V 0°C ≤ TJ ≤ 50 120 150 mV +125°C ΔVIN (8 ≤ VIN ≤ 20) (15 ≤ VIN ≤ 27) (18.5 ≤ VIN ≤ 30) V IO ≤ 1A TJ = 25°C 50 120 150 mV 0°C ≤ TJ ≤ 25 60 75 mV +125°C ΔVIN (8 ≤ VIN ≤ 12) (16 ≤ VIN ≤ 22) (20 ≤ VIN ≤ 26) V ΔVO Load Regulation TJ = 5 mA ≤ IO ≤ 10 50 12 120 12 150 mV 25°C 1.5A 250 mA ≤ IO ≤ 25 60 75 mV 750 mA 5 mA ≤ IO ≤ 1A, 0°C ≤ TJ 50 120 150 mV ≤ +125°C IQ Quiescent IO ≤ 1A TJ = 25°C 8 8 8 mA Current 0°C ≤ TJ ≤ 8.5 8.5 8.5 mA +125°C ΔIQ Quiescent 5 mA ≤ IO ≤ 1A 0.5 0.5 0.5 mA Current Change TJ = 25°C, IO ≤ 1A 1.0 1.0 1.0 mA VMIN ≤ VIN ≤ VMAX (7.5 ≤ VIN ≤ 20) (14.8 ≤ VIN ≤ 27) (17.9 ≤ VIN ≤ 30) V IO ≤ 500 mA, 0°C ≤ TJ ≤ 1.0 1.0 1.0 mA +125°C VMIN ≤ VIN ≤ VMAX (7 ≤ VIN ≤ 25) (14.5 ≤ VIN ≤ 30) (17.5 ≤ VIN ≤ 30) V VN Output Noise TA = 25°C, 10 Hz ≤ f ≤ 40 75 90 μV Voltage 100 kHz Ripple Rejection IO ≤ 1A, TJ = 62 80 55 72 54 70 dB 25°C f = 120 or IO ≤ 500 62 55 54 dB Hz mA, 0°C ≤ TJ ≤ +125°C VMIN ≤ VIN ≤ VMAX (8 ≤ VIN ≤ 18) (15 ≤ VIN ≤ 25) (18.5 ≤ VIN ≤ 28.5) V (1) All characteristics are measured with a 0.22 μF capacitor from input to ground and a 0.1 μF capacitor from output to ground. All characteristics except noise voltage and ripple rejection ratio are measured using pulse techniques (tw ≤ 10 ms, duty cycle ≤ 5%). Output voltage changes due to changes in internal temperature must be taken into account separately.
6 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LM340-N LM78xx
LM340-N, LM78xx www.ti.com SNOSBT0J – FEBRUARY 2000– REVISED DECEMBER 2013 0°C ≤ TJ ≤ +125°C unless otherwise specified Output Voltage 5V 12V 15V Symbol Input Voltage (unless otherwise noted) 10V 19V 23V Units Parameter Conditions Min Typ Max Min Typ Max Min Typ Max RO Dropout Voltage TJ = 25°C, IO = 1A 2.0 2.0 2.0 V Output f = 1 kHz 8 18 19 mΩ Resistance Short-Circuit TJ = 25°C 2.1 1.5 1.2 A Current Peak Output TJ = 25°C 2.4 2.4 2.4 A Current Average TC of 0°C ≤ TJ ≤ +125°C, IO = 5 −0.6 −1.5 −1.8 mV/°C VOUT mA VIN Input Voltage TJ = 25°C, IO ≤ 1A Required to 7.5 14.6 17.7 VMaintain Line Regulation LM7808C
Electrical Characteristics
0°C ≤ TJ ≤ +150°C, VI = 14V, IO = 500 mA, CI = 0.33 μF, CO = 0.1 μF, unless otherwise specified Symbol Parameter Conditions(1) LM7808C Units Min Typ Max VO Output Voltage TJ = 25°C 7.7 8.0 8.3 V ΔVO Line Regulation TJ = 25°C 10.5V ≤ VI ≤ 25V 6.0 160 mV 11.0V ≤ VI ≤ 17V 2.0 80 ΔVO Load Regulation TJ = 25°C 5.0 mA ≤ IO ≤ 1.5A 12 160 mV 250 mA ≤ IO ≤ 750 mA 4.0 80 IQ Quiescent Current TJ = 25°C 4.3 8.0 mA ΔIQ Quiescent With Line 11.5V ≤ VI ≤ 25V 1.0 mA Current Change With Load 5.0 mA ≤ IO ≤ 1.0A 0.5 VN Noise TA = 25°C, 10 Hz ≤ f ≤ 100 kHz 52 μV ΔVI/ΔVO Ripple Rejection f = 120 Hz, IO = 350 mA, TJ = 25°C 56 72 dB VDO Dropout Voltage IO = 1.0A, TJ = 25°C 2.0 V RO Output Resistance f = 1.0 kHz 16 mΩ IOS Output Short Circuit Current TJ = 25°C, VI = 35V 0.45 A IPK Peak Output Current TJ = 25°C 2.2 A ΔVO/ΔT Average Temperature Coefficient of IO = 5.0 mA 0.8 mV/°COutput Voltage (1) All characteristics are measured with a 0.22 μF capacitor from input to ground and a 0.1 μF capacitor from output to ground. All characteristics except noise voltage and ripple rejection ratio are measured using pulse techniques (tw ≤ 10 ms, duty cycle ≤ 5%). Output voltage changes due to changes in internal temperature must be taken into account separately. Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback 7 Product Folder Links: LM340-N LM78xx
Figure 7. Figure 8. Figure 9. Figure 10. Figure 11. Figure 12.
8 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated
Figure 19. Figure 20.
10 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated
Figure 23. Transients less than or equal to this number. temperature rise vs power dissipation for the heatsink. itself as a heatsink. To optimize the heat sinking ability of the plane and PCB, solder the tab of the plane. with 1 ounce copper and no solder mask over the copper area used for heatsinking. Figure 24. θ(J–A) vs Copper (1 ounce) Area for the DDPAK/TO-263 Package for the DDPAK/TO-263 device (assuming θ(J–A) is 35°C/W and the maximum junction temperature is 125°C).
12 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated
Figure 28. Fixed Output Regulator Figure 29. High Input Voltage Circuits
14 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated
Figure 32. Positive and Negative Regulator
16 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated
LM340-N, LM78xx www.ti.com SNOSBT0J – FEBRUARY 2000– REVISED DECEMBER 2013
REVISION HISTORY
Changes from Revision I (March 2013) to Revision J Page Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback 17 Product Folder Links: LM340-N LM78xx
www.ti.com 11-Dec-2013 Addendum-Page 1 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish (6) MSL Peak Temp (3) Op Temp (°C) Device Marking (4/5) Samples LM340AT-5.0 NRND TO-220 NDE 3 45 TBD Call TI Call TI 0 to 70 LM340AT 5.0 P+ LM340AT-5.0/NOPB ACTIVE TO-220 NDE 3 45 Pb-Free (RoHS Exempt) CU SN Level-1-NA-UNLIM 0 to 70 LM340AT 5.0 P+ LM340K-5.0 ACTIVE TO-3 NDS 2 50 TBD Call TI Call TI 0 to 70 LM340K -5.0 7805P+ LM340K-5.0/NOPB ACTIVE TO-3 NDS 2 50 Green (RoHS & no Sb/Br) POST-PLATE Level-1-NA-UNLIM 0 to 70 LM340K -5.0 7805P+ LM340MP-5.0 NRND SOT-223 DCY 4 1000 TBD Call TI Call TI 0 to 70 N00A LM340MP-5.0/NOPB ACTIVE SOT-223 DCY 4 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM 0 to 70 N00A LM340MPX-5.0/NOPB ACTIVE SOT-223 DCY 4 2000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM 0 to 70 N00A LM340S-12/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR 0 to 70 LM340S -12 P+ LM340S-5.0 NRND DDPAK/ TO-263 KTT 3 45 TBD Call TI Call TI 0 to 70 LM340S -5.0 P+ LM340S-5.0/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR 0 to 70 LM340S -5.0 P+ LM340SX-12 NRND DDPAK/ TO-263 KTT 3 500 TBD Call TI Call TI 0 to 70 LM340S -12 P+ LM340SX-12/NOPB ACTIVE DDPAK/ TO-263 KTT 3 500 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR 0 to 70 LM340S -12 P+ LM340SX-5.0 NRND DDPAK/ TO-263 KTT 3 500 TBD Call TI Call TI 0 to 70 LM340S -5.0 P+ LM340SX-5.0/NOPB ACTIVE DDPAK/ TO-263 KTT 3 500 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR 0 to 70 LM340S -5.0 P+ LM340T-12 NRND TO-220 NDE 3 45 TBD Call TI Call TI 0 to 70 LM340T12 7812 P+ LM340T-12/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS & no Sb/Br) CU SN Level-1-NA-UNLIM 0 to 70 LM340T12 7812 P+ LM340T-15 NRND TO-220 NDE 3 45 TBD Call TI Call TI 0 to 70 LM340T15 7815 P+
www.ti.com 11-Dec-2013 Addendum-Page 2 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish (6) MSL Peak Temp (3) Op Temp (°C) Device Marking (4/5) Samples LM340T-15/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS & no Sb/Br) CU SN Level-1-NA-UNLIM 0 to 70 LM340T15 7815 P+ LM340T-5.0 NRND TO-220 NDE 3 45 TBD Call TI Call TI 0 to 70 LM340T5 7805 P+ LM340T-5.0/LF01 ACTIVE TO-220 NDG 3 45 Pb-Free (RoHS Exempt) CU SN Level-4-260C-72 HR LM340T5 7805 P+ LM340T-5.0/NOPB ACTIVE TO-220 NDE 3 45 Pb-Free (RoHS Exempt) CU SN Level-1-NA-UNLIM 0 to 70 LM340T5 7805 P+ LM7812CT NRND TO-220 NDE 3 45 TBD Call TI Call TI 0 to 70 LM340T12 7812 P+ LM7812CT/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS & no Sb/Br) CU SN Level-1-NA-UNLIM 0 to 70 LM340T12 7812 P+ (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device.
www.ti.com 11-Dec-2013 Addendum-Page 3 (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Reel Diameter (mm) Reel Width W1 (mm) (mm) (mm) (mm) (mm) W (mm) Pin1 Quadrant LM340SX-12 DDPAK/ TO-263 LM340SX-12/NOPB DDPAK/ TO-263 LM340SX-5.0 DDPAK/ TO-263 LM340SX-5.0/NOPB DDPAK/ TO-263 PACKAGE MATERIALS INFORMATION www.ti.com 11-Dec-2013 Pack Materials-Page 1
*All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM340MP-5.0 SOT-223 DCY 4 1000 367.0 367.0 35.0 LM340MP-5.0/NOPB SOT-223 DCY 4 1000 367.0 367.0 35.0 LM340MPX-5.0/NOPB SOT-223 DCY 4 2000 367.0 367.0 35.0 LM340SX-12 DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LM340SX-12/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LM340SX-5.0 DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LM340SX-5.0/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 PACKAGE MATERIALS INFORMATION www.ti.com 11-Dec-2013 Pack Materials-Page 2
www.ti.com
www.ti.com
www.ti.com T03F (Rev B)
MPDS094A – APRIL 2001 – REVISED JUNE 2002 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 DCY (R-PDSO-G4) PLASTIC SMALL-OUTLINE 4202506/B 06/2002 6,30 (0.248) 6,70 (0.264) 2,90 (0.114) 3,10 (0.122) 6,70 (0.264) 3,30 (0.130) 0,02 (0.0008) 0,10 (0.0040) 1,50 (0.059) 1,70 (0.067) 0,23 (0.009) 0,35 (0.014) 1 2 3 0,66 (0.026) 0,84 (0.033) 1,80 (0.071) MAX Seating Plane 0°–10° Gauge Plane 0,75 (0.030) MIN 0,25 (0.010) 0,08 (0.003) 0,10 (0.004) M 2,30 (0.091) NOTES: A. All linear dimensions are in millimeters (inches). B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion. D. Falls within JEDEC TO-261 Variation AA.
www.ti.com BOTTOM SIDE OF PACKAGE TS3B (Rev F)
Texas InstrumentsIncorporatedand itssubsidiaries(TI)reservetherighttomake corrections,enhancements,improvementsand other changes toitssemiconductorproductsand servicesperJESD46, latestissue,and todiscontinueany productorserviceperJESD48, latest issue.Buyersshouldobtainthelatestrelevantinformationbeforeplacingordersand shouldverifythatsuch informationiscurrentand complete.Allsemiconductorproducts(alsoreferredtohereinas “components”)aresoldsubjecttoTI’s termsand conditionsofsale suppliedatthetimeoforderacknowledgment. TIwarrantsperformanceofitscomponents tothespecificationsapplicableatthetimeofsale,inaccordancewiththewarrantyinTI’s terms and conditionsofsaleofsemiconductorproducts.Testingand otherqualitycontroltechniquesareused totheextentTIdeems necessary tosupportthiswarranty.Exceptwhere mandated by applicablelaw,testingofallparametersofeach component isnotnecessarily performed. TIassumes no liabilityforapplicationsassistanceorthedesignofBuyers’products.Buyersareresponsiblefortheirproductsand applicationsusingTIcomponents.To minimizetherisksassociatedwithBuyers’productsand applications,Buyersshouldprovide adequatedesignand operatingsafeguards. TIdoes notwarrantorrepresentthatany license,eitherexpressorimplied,isgrantedunderany patentright,copyright,mask work right,or otherintellectualpropertyrightrelatingtoany combination,machine,orprocessinwhichTIcomponents orservicesareused.Information publishedby TIregardingthird-partyproductsorservicesdoes notconstitutea licensetouse such productsorservicesora warrantyor endorsementthereof.Use ofsuch informationmay requirea licensefroma thirdpartyunderthepatentsorotherintellectualpropertyofthe thirdparty,ora licensefromTIunderthepatentsorotherintellectualpropertyofTI. ReproductionofsignificantportionsofTIinformationinTIdatabooks ordatasheetsispermissibleonlyifreproductioniswithoutalteration and isaccompaniedby allassociatedwarranties,conditions,limitations,and notices.TIisnotresponsibleorliableforsuch altered documentation.Informationofthirdpartiesmay be subjecttoadditionalrestrictions. ResaleofTIcomponents orserviceswithstatementsdifferentfromorbeyond theparametersstatedby TIforthatcomponent orservice voidsallexpressand any impliedwarrantiesfortheassociatedTIcomponent orserviceand isan unfairand deceptivebusinesspractice. TIisnotresponsibleorliableforany such statements. Buyeracknowledgesand agreesthatitissolelyresponsibleforcompliancewithalllegal,regulatoryand safety-relatedrequirements concerningitsproducts,and any use ofTIcomponents initsapplications,notwithstandingany applications-relatedinformationorsupport thatmay be providedby TI.Buyerrepresentsand agreesthatithas allthenecessaryexpertisetocreateand implementsafeguardswhich anticipatedangerousconsequencesoffailures,monitorfailuresand theirconsequences,lessenthelikelihoodoffailuresthatmightcause harm and takeappropriateremedialactions.BuyerwillfullyindemnifyTIand itsrepresentativesagainstany damages arisingoutoftheuse ofany TIcomponents insafety-criticalapplications. Insome cases,TIcomponents may be promotedspecificallytofacilitatesafety-relatedapplications.Withsuch components,TI’s goalisto helpenablecustomerstodesignand createtheirown end-productsolutionsthatmeet applicablefunctionalsafetystandardsand requirements.Nonetheless,such components aresubjecttotheseterms. No TIcomponents areauthorizedforuse inFDA ClassIII(orsimilarlife-criticalmedicalequipment)unlessauthorizedofficersoftheparties have executeda specialagreementspecificallygoverningsuch use. OnlythoseTIcomponents whichTIhas specificallydesignatedas militarygradeor“enhanced plastic”aredesignedand intendedforuse in military/aerospaceapplicationsorenvironments.Buyeracknowledgesand agreesthatany militaryoraerospaceuse ofTIcomponents whichhave not been so designatedissolelyattheBuyer's risk,and thatBuyerissolelyresponsibleforcompliancewithalllegaland regulatoryrequirementsinconnectionwithsuch use. TIhas specificallydesignatedcertaincomponents as meetingISO/TS16949 requirements,mainlyforautomotiveuse.Inany case ofuse of non-designatedproducts,TIwillnotbe responsibleforany failuretomeet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotiveand Transportationwww.ti.com/automotive Amplifiers amplifier.ti.com Communicationsand Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP ® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energyand Lighting www.ti.com/energy Clocksand Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space,Avionicsand Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Videoand Imaging www.ti.com/video RFID www.ti-rfid.com OMAP ApplicationsProcessors www.ti.com/omap TIE2E Community e2e.ti.com WirelessConnectivity www.ti.com/wirelessconnectivity MailingAddress:Texas Instruments,PostOfficeBox 655303,Dallas,Texas 75265 Copyright© 2013,Texas InstrumentsIncorporated