LM1403 NSC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

Y Low 400 mA operating current Y Low output impedance (0.15 X) Y Excellent line regulation (0.0001%/V typical) Y Single-supply operation Y Low temperature coefficient Y Excellent initial accuracy (0.05% typical) Y Excellent for low-voltage operation (VS e 5V, V REF e 2.500V) Y For tighter specs, refer to LM368-2.5 Connection Diagram Dual-In-Line Package TL/H/9757–1 Top View Order Number LM1403N or LM1403AN See NS Package Number N08E Typical Applications Low Voltage Reference TL/H/9757–2 C1995 National Semiconductor Corporation RRD-B30M115/Printed in U. S. A.

Absolute Maximum Ratings (Note 7) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Input Voltage 40V Power Dissipation 600 mW Output Short-Circuit Duration Continuous Storage Temperature Range b60§Ct o a150§C Operating Temperature Range 0 §Ct o a70§C Lead Temperature (Soldering, 10 sec.) 260 §C ESD rating to be determined. Electrical Characteristics (Note 1) LM1403, LM1403A Tested Design Units Parameter Conditions Typical Limit Limit (Max. Unless (Note 2) (Note 3) Noted) VOUT a2.500 V VOUT Error: LM1403 g0.05 g1.0 % LM1403A g0.04 g0.4 % Line Regulation 4.5V s VIN s 40V 0.2 3 mV Load Regulation (Note 8) 0 mA s ISOURCE s 10 mA 1.5 10 mV Thermal Regulation T e 20 ms (Note 4) g0.005 g0.02 %/100 mW Quiescent Current I L e 0 mA 0.350 1.50 mA Change of Quiescent Current vs. V IN 5.0V s VIN s 30V 3 mA/V Temperature Coefficient of V OUT (see graph): LM1403A 0 §C s TA s 70§C g11 g25 ppm/ §C (Note 5) LM1403 0 §C s TA s 70§C g15 g40 ppm/ §C Short Circuit Current V OUT e 0 30 70 100 mA Noise: 0.1 Hz–10 Hz 12 mVp-p

100 Hz–10 kHz 420 nV/ 0Hz

Note 1: Unless otherwise noted, these specifications apply: T A e 25§C, 4.9V s VIN s 15.5V, 0 s ILOAD s 0.5 mA, 0 s CL s 200 pF. Note 2: Tested Limits are guaranteed and 100% tested in production. Note 3: Design Limits are guaranteed (but not 100% production tested) over the indicated temperature and supply voltage ranges. These limits are used to calculate outgoing quality levels. Note 4: Thermal Regulation is defined as the change in the output Voltage at a time T after a step change in power dissipation of 100 mW. Note 5: Temperature Coefficient of V OUT is defined as the worst case delta-V OUT measured at Specified Temperatures divided by the total span of the Specified Temperature Range (See graphs). There is no guarantee that the Specified Temperatures are exactly at the minimum or maximum deviation. Note 6: Thermal Resistance is 160 §C/W, junction to ambient, soldered into a PC board. Note 7: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. DC and AC electrical specifications do not apply when operating the device beyond its Rated Operating Conditions (see Note 1 and Conditions). Note 8: Load regulation is measured on the output pin at a point (/8× below the base of the package. Regulation is measured at constant junction temperature, using pulse testing with a low duty cycle. Changes in output voltage due to heating effects are covered under the specification for thermal regulation.

Typical Performance Characteristics (Note 1) Voltage and Temperature Quiescent Current vs Input Output Current Dropout Voltage vs Output Current Output Change vs Frequency Output Impedance vs Frequency Ripple Rejection vs (1) LM1403 as is. (2) With 10 X in series with 10 mF, VOUT to GND. Temperature Coefficient Frequency Output Noise vs. TL/H/9757–3 Typical Temperature Coefficient Calculations: T.C. e 1.7 mV/(70 § c 2.5V) e 9.7 ppm/ §C

Improved Noise Performance TL/H/9757–4 g2.5V, g1.25V References TL/H/9757–5 Re Thin Film Resistor Network, g0.05% Matching and 5 ppm Tracking (Beckman 694-3-R-10K-A), (Caddock T-914-10K-100-05) or similar. Multiple Output Voltages TL/H/9757–6 R e Thin Film Resistor Network 0.05% Matching and 5 ppm Tracking (Beckman 694-3-R-10K-A), (Caddock T-914-10K-100-05) or similar. TL/H/9757–7 Reference with Booster TL/H/9757–8 100 mA Boosted Reference TL/H/9757–9

Typical Applications (Continued) Buffered High-Current Reference with Filter TL/H/9757–10 Simplified Schematic Diagram TL/H/9757–11

LM1403/LM1403A Precision 2.50V Reference Physical Dimensions inches (millimeters) Lit. Ý106560 Plastic Dual-In-Line Package (N) Order Number LM1403N or LM1403AN LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant support device or system whose failure to perform can into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life failure to perform, when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can effectiveness. be reasonably expected to result in a significant injury to the user. National Semiconductor National Semiconductor National Semiconductor National Semiconductor Corporation Europe Hong Kong Ltd. Japan Ltd.

1111 West Bardin Road Fax: (

a49) 0-180-530 85 86 13th Floor, Straight Block, Tel: 81-043-299-2309 Arlington, TX 76017 Email: cnjwge @ tevm2.nsc.com Ocean Centre, 5 Canton Rd. Fax: 81-043-299-2408 Tel: 1(800) 272-9959 Deutsch Tel: ( a49) 0-180-530 85 85 Tsimshatsui, Kowloon Fax: 1(800) 737-7018 English Tel: ( a49) 0-180-532 78 32 Hong Kong Fran3ais Tel: ( a49) 0-180-532 93 58 Tel: (852) 2737-1600 Italiano Tel: ( a49) 0-180-534 16 80 Fax: (852) 2736-9960 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.