LM136-50 NSC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Features

n Low temperature coefficient n Wide operating current of 600 µA to 10 mA n 0.6Ω dynamic impedance n ± 1% initial tolerance available n Guaranteed temperature stability n Easily trimmed for minimum temperature drift n Fast turn-on n Three lead transistor package Connection Diagrams TO-92 Plastic Package DS005716-4 Bottom View Order Number LM236AZ-5.0, LM336Z-5.0 or LM336BZ-5.0 See NS Package Number Z03A TO-46 Metal Can Package DS005716-5 Bottom View Order Number LM136H-5.0, LM136AH-5.0, LM136AH-5.0/883, or LM236AH-5.0 See NS Package Number H03H June 1999 LM136-5.0/LM236-5.0/LM336-5.0 5.0V Reference Diode © 1999 National Semiconductor Corporation DS005716 www.national.com

Connection Diagrams (Continued) Typical Applications DS005716-7 Order Number LM336M-5.0 or LM336BM-5.0 See NS Package Number M08A 5.0V Reference DS005716-1 5.0V Reference with Minimum Temperature Coefficient DS005716-15 † Adjust to 5.00V * Any silicon signal diode Trimmed 4V to 6V Reference with Temperature Coefficient Independent of Breakdown Voltage DS005716-3 * Does not affect temperature coefficient www.national.com 2

Absolute Maximum Ratings(Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Reverse Current 15mA Forward Current 10mA Storage Temperature −60˚C to +150˚C Operating Temperature Range (Note 2) LM136-5.0 −55˚C to +150˚C LM236-5.0 −25˚C to +85˚C LM336-5.0 0˚C to +70˚C Soldering Information Vapor Phase (60 sec.) 215˚C Infrared (15 sec.) 220˚C See AN-450 “Surface Mounting Methods and Their Effect on Product Reliability” (appendix D) for other methods of solder- ing surface mount devices.

Electrical Characteristics

(Note 3) LM136A-5.0/LM236A-5.0 LM336B-5.0 Parameter Conditions LM136-5.0/LM236-5.0 LM336-5.0 Units Min Typ Max Min Typ Max Reverse Breakdown Voltage T A =25˚C, IR =1m A Reverse Breakdown Change T A =25˚C, 6 12 6 20 mV With Current 600 µA ≤IR ≤10 mA Reverse Dynamic Impedance T A =25˚C, IR =1 mA, f= 100 Hz 0.6 1.2 0.6 2 Ω Temperature Stability V R Adjusted 5.00V (Note 4) I R =1 mA, (Figure 2) 0˚C≤TA≤70˚C (LM336-5.0) 4 12 mV Reverse Breakdown Change 600 µA ≤IR ≤10 mA 6 17 6 24 mV With Current Adjustment Range Circuit of Figure 1 ±1 ±1V Reverse Dynamic Impedance IR = 1 mA 0.8 1.6 0.8 2.5 Ω Long Term Stability T A =25˚C±0.1˚C, IR =1 mA, t= 1000 hrs 20 20 ppm Note 1:Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Electrical specifications do not apply when operating the device beyond its specified operating conditions. Note 2:For elevated temperature operation, Tjmax is: LM136 150˚C LM236 125˚C LM336 100˚C Thermal Resistance TO-92 TO-46 SO-8 θja(Junction to Ambient) 180˚C/W (0.4" Leads) 440˚C/W 165˚C/W 170˚C/W (0.125" Leads) θja(Junction to Case) N/A 80˚C/W N/A Note 3:Unless otherwise specified, the LM136-5.0 is specified from −55˚C≤TA≤+125˚C, the LM236-5.0 from −25˚C≤TA≤+85˚C and the LM336-5.0 from 0˚C≤TA≤+70˚C. Note 4:Temperature stability for the LM336 and LM236 family is guaranteed by design. Design limits are guaranteed (but not 100% percent production tested) over the indicated temperature and supply voltage ranges. These limits are not used to calculate outgoing quality levels. Stability is defined as the maximum charge in VREF from 25˚C to TA(min) or TA(max). www.national.com3

Precision Power Regulator with Low Temperature Coefficient DS005716-11 * Adjust for 6.25V across R1 5V Crowbar DS005716-12 Adjustable Shunt Regulator DS005716-13 www.national.com 6

Typical Applications(Continued) Linear Ohmmeter DS005716-14 Op Amp with Output Clamped DS005716-24 Bipolar Output Reference DS005716-25 5.0V Square Wave Calibrator DS005716-26 10V Buffered Reference DS005716-27 www.national.com7

Typical Applications(Continued) Low Noise Buffered Reference DS005716-28 Wide Input Range Reference DS005716-29 www.national.com 8

www.national.com9

Physical Dimensionsinches (millimeters) unless otherwise noted TO-46 Metal Can Package (H) Order Number LM136H-5.0, LM136H-5.0/883, LM236H-5.0, LM136AH-5.0, LM136AH-5.0/883 or LM236AH-5.0 Small Outline (SO-8) Package Order Number LM336M-5.0 or LM336BM-5.0 www.national.com 10

Physical Dimensionsinches (millimeters) unless otherwise noted (Continued) LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com National Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 1 80-530 85 85 English Tel: +49 (0) 1 80-532 78 32 Français Tel: +49 (0) 1 80-532 93 58 Italiano Tel: +49 (0) 1 80-534 16 80 National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: sea.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5639-7560 Fax: 81-3-5639-7507 www.national.com Plastic Package (Z) Order Number LM236AZ-5.0, LM336Z-5.0 or LM336BZ-5.0 LM136-5.0/LM236-5.0/LM336-5.0 5.0V Reference Diode National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.