LM136-5.0

LM136-5.0 NSC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

Features

n Low temperature coefficient n Wide operating current of 600 µA to 10 mA n 0.6Ω dynamic impedance n ± 1% initial tolerance available n Guaranteed temperature stability n Easily trimmed for minimum temperature drift n Fast turn-on n Three lead transistor package Connection Diagrams TO-92 Plastic Package 00571604 Bottom View Order Number LM336Z-5.0 or LM336BZ-5.0 See NS Package Number Z03A TO-46 Metal Can Package 00571605 Bottom View Order Number LM136H-5.0, LM136AH-5.0, LM136AH-5.0/883, or LM236AH-5.0 See NS Package Number H03H 00571607 Order Number LM336M-5.0 or LM336BM-5.0 See NS Package Number M08A September 2003 LM136-5.0/LM236-5.0/LM336-5.0 5.0V Reference Diode © 2003 National Semiconductor Corporation DS005716 www.national.com

5.0V Reference 00571601 5.0V Reference with Minimum Temperature Coefficient 00571615 † Adjust to 5.00V * Any silicon signal diode Trimmed 4V to 6V Reference with Temperature Coefficient Independent of Breakdown Voltage 00571603 * Does not affect temperature coefficient www.national.com 2

Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Reverse Current 15mA Forward Current 10mA Storage Temperature −60˚C to +150˚C Operating Temperature Range (Note 2) LM136-5.0 −55˚C to +150˚C LM236-5.0 −25˚C to +85˚C LM336-5.0 0˚C to +70˚C Soldering Information Vapor Phase (60 sec.) 215˚C Infrared (15 sec.) 220˚C See AN-450 “Surface Mounting Methods and Their Effect on Product Reliability” (appendix D) for other methods of sol- dering surface mount devices.

Electrical Characteristics

(Note 3) LM136A-5.0/LM236A-5.0 LM336B-5.0 Parameter Conditions LM136-5.0/LM236-5.0 LM336-5.0 Units Min Typ Max Min Typ Max Reverse Breakdown Voltage T A=25˚C, IR=1 mA Reverse Breakdown Change T A=25˚C, 6 12 6 20 mV With Current 600 µA ≤IR≤10 mA Reverse Dynamic Impedance T A=25˚C, IR=1 mA, f = 100 Hz 0.6 1.2 0.6 2 Ω Temperature Stability V R Adjusted 5.00V (Note 4) I R=1 mA, (Figure 2) 0˚C≤TA≤70˚C (LM336-5.0) 4 12 mV Reverse Breakdown Change 600 µA ≤IR≤10 mA 6 17 6 24 mV With Current Adjustment Range Circuit of Figure 1 ±1 ±1V Reverse Dynamic Impedance I R = 1 mA 0.8 1.6 0.8 2.5 Ω Long Term Stability T A=25˚C±0.1˚C, IR=1 mA, t = 1000 hrs 20 20 ppm Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Electrical specifications do not apply when operating the device beyond its specified operating conditions. Note 2: For elevated temperature operation, T j max is: LM136 150˚C LM236 125˚C LM336 100˚C Thermal Resistance TO-92 TO-46 SO-8 θja (Junction to Ambient) 180˚C/W (0.4" Leads) 440˚C/W 165˚C/W 170˚C/W (0.125" Leads) θja (Junction to Case) N/A 80˚C/W N/A Note 3: Unless otherwise specified, the LM136-5.0 is specified from −55˚C ≤TA≤+125˚C, the LM236-5.0 from −25˚C ≤TA≤+85˚C and the LM336-5.0 from 0˚C≤TA≤+70˚C. Note 4: Temperature stability for the LM336 and LM236 family is guaranteed by design. Design limits are guaranteed (but not 100% percent production tested) over the indicated temperature and supply voltage ranges. These limits are not used to calculate outgoing quality levels. Stability is defined as the maxi mum charge in VREF from 25˚C to TA(min) or TA(max). www.national.com3

Typical Performance Characteristics Reverse Voltage Change Zener Noise Voltage 00571617 00571618 Dynamic Impedance Response Time 00571619 00571620 Reverse Characteristics Temperature Drift 00571621 00571622 www.national.com 4

Precision Power Regulator with Low Temperature Coefficient 00571611 * Adjust for 6.25V across R1 5V Crowbar 00571612 Adjustable Shunt Regulator 00571613 www.national.com 6

Typical Applications (Continued) Linear Ohmmeter 00571614 Op Amp with Output Clamped 00571624 www.national.com7

Typical Applications (Continued) Bipolar Output Reference 00571625 5.0V Square Wave Calibrator 00571626 10V Buffered Reference 00571627 www.national.com 8

Typical Applications (Continued) Low Noise Buffered Reference 00571628 Wide Input Range Reference 00571629 www.national.com9

www.national.com 10

Physical Dimensions inches (millimeters) unless otherwise noted TO-46 Metal Can Package (H) Order Number LM136H-5.0, LM136H-5.0/883, LM236H-5.0, LM136AH-5.0, LM136AH-5.0/883 or LM236AH-5.0 Small Outline (SO-8) Package Order Number LM336M-5.0 or LM336BM-5.0 www.national.com11

Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Plastic Package (Z) Order Number LM336Z-5.0 or LM336BZ-5.0 LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Americas Customer Support Center Email: new.feedback@nsc.com Tel: 1-800-272-9959 National Semiconductor Europe Customer Support Center Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Français Tel: +33 (0) 1 41 91 8790 National Semiconductor Asia Pacific Customer Support Center Email: ap.support@nsc.com National Semiconductor Japan Customer Support Center Fax: 81-3-5639-7507 Email: jpn.feedback@nsc.com Tel: 81-3-5639-7560 www.national.com LM136-5.0/LM236-5.0/LM336-5.0 5.0V Reference Diode National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the righ t at any time without notice to change said circuitry and specifications.