LINKRUNNER DIALIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MDEXLUMILINE_D Dialight Corporation
1501 Route 34 South • Farmingdale, NJ 07727 USA
Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MATERIALS/FINISH
APPLICATIONS
/triangleupExtremely long life of 50,000 hours at 55ºC PCB temperature /triangleupDurable F-Form optics holder allow for easy changing of 4 lens options (5, 15, 25 degree + 5x20 degree oval)** /triangleupAvailable in 6 colors (Cool White, Warm White, Red, Blue, Green, Amber) /triangleupAluminium based PCB for easier heat dissipation and more efficient operation /triangleupUnits with production dates of 8/07 or later come with
22 AWG 12” lead wires pre-attached (red+ / black-)
/triangleup LUXEON® I LEDs /triangleup 1.6mm Aluminium clad PCB substrate /triangleup White solder resist finish Height (all models including lens) = 15.5mm (0.61”) LumiLine 3: 324mm X 20.5mm (12.75” x 0.8”) LumiLine 9: 324mm X 20.5mm (12.75” x 0.8”) PART NUMBERS /triangleup Display case lighting /triangleup Cove lighting /triangleup Wall washing /triangleup Any application requiring efficiency & long life in a linear light pattern OPERATING CONDITIONS /triangleup Recommended PCB temp=55ºC Maximum PCB temp = 105ºC /triangleup LED Life @ 55ºC PCB temp = 50,000 hours /triangleup For maximum performance efficiency and longevity, all “LumiLine” LED Light Engines should be screwed or affixed using thermal adhesive to an appropriate heat sink /triangleup Maximum input current = 350mA /triangleup Thermal conductivity = 1.3W/m-k /triangleup Breakdown voltage = 2kV # of LEDs (A) 3 = 3 LEDs / LumiLine 3 9 = 9 LEDs / LumiLine 9 LED Color (B) W = Cool White WW = Warm White R = Red G = Green B = Blue A = Amber * Lens to be purchased and installed seperately This figure indicates half-divergence angle LENS Type (CCC) 005 = 5 Degree 015 = 15 Degree 025 = 25 Degree 520 = 5 X 20 Degree XXX = no lens* Dialight reserves the right to make changes at any time in order to supply the best product possible.
Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDEXLUMILINE_D Maximum current input 350mA Maximum power consumption 1.2W per LED for White / Blue / Green / Warm White, 1.0W per LED for Red / Amber. Recommended min gauge wire, AWG24 Dialight reserves the right to make changes at any time in order to supply the best product possible. LUMILINE LED LIGHT ENGINES SINGLE COLOR PHOTOMETRIC DATA TYPICAL LED PHOTOMETRIC DATA ELECTRICAL SPECIFICATIONS LED Color Forward Voltage (Typ) Max.Current (mA) Max. Power (Watts) Dom Wavelength / CCT Min Luminous Flux (lm) / Radiometric Power (mW) Typ Luminous Flux (lm) / Radiometric Power (mW)Min Typ Max Red 2.95 350 1.03 620.5 nm 627 nm 645 nm 30.6 lm 44 lm Green 3.42 350 1.20 520 nm 530 nm 550 nm 30.6 lm 53 lm Royal Blue 3.42 350 1.20 440 nm 455 nm 460 nm 145 mW 220 mW White 3.42 350 1.20 4500 K 5500 K 10000 K 30.6 lm 45 lm Amber 2.95 350 1.03 584.5 nm 590 nm 597 nm 23.5 lm 42 lm W White 3.42 350 1.20 2850 K 3300 K 3800 K 13.9 lm 20 lm Results are LED manufacturer’s test data @ 25ºC JTC’. Light output at 55ºC PCB temperature will be approximately 15-20% lower. Elevated temperatures will result in further degradation of light output. For maximum performance use appropriate heat sinking .