LIN ZFSWITCHES | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
www.cherryswitches.com Page 1 of 2 Last update 2016-07-12; specifications subject to change without notice. Linear Position Sensors LIN Sensors – Kit with magnet Thin, programmable, non-contact magnetic position sensors with dual outputs available
Description
The LIN Series sensors are non-contact linear position sensors with one or two independent outputs. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to a linear displacement of the actuator magnet. The included actuator magnet is specifically paired to the sensor and is required to assure proper operation. Other magnets may yield less than optimal performance. Features Typical Applications Easy setup and robust monitoring with M4 screws Dual independent (redundant) outputs assure high reliability Custom programming available for: range, slope, PWM output No mechanical interface means no parts to wear out or jam Comes with 20 AWG 305 mm (12”) discrete wire leads or harness with connector RoHS Compliant IP68* Suitable for wide air gap applications Compliant to industrial/automotive EMC/EMI/ESD directives Hydraulic valves Hydraulic controls Electric drives Pneumatic controls Zero-contact encoder alternative Gear selection / shifting position Environmental Specifications Operating Temperature -40 ⁰C to 140 ⁰C (-40 ⁰F to 284 ⁰F) Ingress Protection IP68* *Contact ZF for details on testing conditions Electrical Specifications Input Supply Voltage Maximum Overvoltage Reverse Battery Protection
5.0 VDC ± 10% 16 VDC 12 VDC
Output Signal 0.5 – 4.5 VDC (with nominal input) Input Current Single output 8 mA typ., 10 mA max. Dual output 16 mA typ., 20 mA max. Resolution 12 bit Accuracy, overall ±2% Full scale Output Linearity ±1%Full scale Mechanical Specifications Measuring Range Up to 45 mm Air Gap 4.5 mm (0.18”) Maximum Magnet Misalignment 2 mm (0.08”) Output is calibrated to meet spec within air gap shown; any variation will affect performance
www.cherryswitches.com Page 2 of 2 Last update 2016-07-12; specifications subject to change without notice. Typical Output vs. Linear Displacement (as percentage of input) Dimensions mm (inches) Products Part Number Output Interface LIN-11HAW1 Analog single 20 AWG x 305 mm (12") discrete wires LIN-21HAW1 Analog dual 20 AWG x 305 mm (12") discrete wires