LHY-1H MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits The Big Deal

  • Ultra High IP3
  • Broadband High Dynamic Range without external Matching Components
  • Small size 2 x 2 mm Product Overview LHY-1H+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition, the LHY-1H+, unlike competitive models, is well matched (input and output) over a broad frequency range without the need for external matching components. Lead finish is tin-silver over nickel. It is enclosed in a 2x2 mm MCLP package for low parasitic interface. LHY-1H+ Key Features Feature Advantages Broad Band: 0.05 to 6.0 GHz Broadband covering primary wireless communications bands: Cellular, PCS, LTE, WiMAX Extremely High IP3 versus DC power Consumption 41 dBm typical at 2 GHz The LHY-1H+ matches industry leading IP3 performance relative to device size and power consumption. The combination of the design and E-PHEMT Structure provides enhanced linearity over a broad frequency range as evidence in the IP3 being typically 17 dB above the P 1dB point. This feature makes this amplifier ideal for use in:
  • Driver amplifiers for complex waveform up converter paths
  • Drivers in linearized transmit systems
  • Secondary amplifiers in ultra High Dynamic range receivers Low Noise Figure: 2.7 dB typ. up to 4 GHz 3.1 dB typ. up to 6 GHz A unique feature of the LHY-1H+ which separates this design from all competitors is the low noise figure performance in combination with the high dynamic range. Small size 2 x 2 mm Saves PCB area 50Ω 0.05 to 6 GHz CASE STYLE: MC1630-1

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits simplified schematic and pad description Function Pad Number Description RF-IN 2 RF input pin. RF-OUT and DC-IN 5 RF output and bias pin. GND 1,3,4,6 paddle Connections to ground. 0.05-6 GHz CASE STYLE: MC1630-1 LHY-1H+ Product Features

  • High IP3, 41 dBm typ. at 2 GHz, 5V
  • Gain, 14.0 dB typ. at 2 GHz, 5V
  • High Pout, P1dB 22.5 dBm typ. at 2 GHz, 5V
  • Low noise figure, 2.1 dB @2 GHz, 5V
  • Usable to 4.0V
  • No external matching components required REV. OR M156356 LHY -1H+ TH/RS/CP/AM 160927 General Description LHY-1H+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition, the LHY-1H+ has well matched input and output over a broad frequency range without the need for external matching components. Lead finish is tin-silver over nickel. It has repeatable performance from lot to lot and is enclosed in a 2 x 2 mm MCLP package for low parasitic interface. Typical Applications
  • Base station infrastructure
  • Portable Wireless
  • CATV & DBS
  • MMDS & Wireless LAN
  • LTE RF-IN RF-OUT and DC-IN GND +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications

Monolithic E-PHEMT MMIC Amplifier Page 3 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Absolute Maximum Ratings3 Parameter Ratings Operating Temperature (ground lead) -40°C to 85°C Storage Temperature -65°C to 150°C Operating Current at 5V 210 mA Power Dissipation 1 W Input Power (CW) 24 dBm DC Voltage on Pad 5 6 V 3. Permanent damage may occur if any of these limits are exceeded. Electrical maximum ratings are not intended for continuous normal operation. LHY-1H+ 1. Measured on Mini-Circuits Characterization test board TB-621+. See Characterization Test Circuit (Fig. 1) 2. (Current at 85°C — Current at -45°C)/130 Electrical Specifications1 at 25°C, unless noted Parameter Condition (GHz) Vd=5.0V Vd=4.5V Vd=4.0V Units Frequency Range 0.05 6 0.05-6 0.05-6 GHz 2.0 14.0 13.8 13.6 3.0 12.4 12.2 11.9 6.0 8.5 8.3 8.0 Input Return Loss 0.05 11.1 11.0 10.6 dB 2.0 10.9 10.8 10.6 3.0 9.2 9.1 8.9 4.0 7.8 7.7 7.6 6.0 6.7 6.7 6.7 Output Return Loss 0.05 14.1 14.0 13.8 dB 2.0 18.8 18.0 16.8 3.0 17.3 16.6 15.4 4.0 16.2 15.4 14.3 6.0 13.7 13.3 12.6 Reverse Isolation 2.0 19.3 19.1 18.9 dB 3.0 22.8 21.5 19.9 4.0 22.7 21.5 20.0 6.0 22.3 21.2 19.7 Output IP3 0.05 40.1 37.9 34.6 dBm 2.0 41.0 36.3 33.0 3.0 41.6 36.2 32.6 4.0 40.8 35.7 32.2 6.0 39.4 35.4 31.9 Noise Figure 0.05 1.6 1.5 1.4 dB 0.8 1.8 1.7 1.7 2.0 2.1 2.0 2.0 3.0 2.3 2.3 2.2 4.0 2.6 2.4 2.4 6.0 3.1 3.1 2.8 Device Operating Current 144 165 116 88 mA Device Current Variation vs. Temperature2 113 136 152 µA/°C Device Current Variation vs Voltage 0.059 0.057 0.056 mA/mV Thermal Resistance, junction-to-ground lead 55 55 55 °C/W

Monolithic E-PHEMT MMIC Amplifier Page 4 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits LHY-1H+ Fig 1. Block Diagram of Test Circuit used for characterization. (DUT soldered on Mini-Circuits Characterization test board TB-621+) Gain, Return loss, Output power at 1dB compression (P1 dB) , output IP3 (OIP3) and noise figure measured using Agilent’s N5242A PNA-X microwave network analyzer. Conditions: 1. Gain and Return loss: Pin= -25dBm 2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 5 dBm/tone at output. Characterization Test Circuit Recommended Application Circuit Product Marking RF-IN RF-OUT5 Vcc (Supply voltage) BLK-18+ Bias-Tee ZX85-12G-S+ DUT TB-621+ 1,3,4,6 & paddle +5V LHY Fig 2. Test Board includes case, connectors, and components soldered to PCB. Marking may contain other features or characters for internal lot control

Monolithic E-PHEMT MMIC Amplifier Page 5 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits LHY-1H+ Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles, 260°C Soak 85°C/85RH 168 hours Bake at 125°C, 24 hours Visual Inspection Electrical Test SAM Analysis Start MSL Test Flow Chart ESD Rating Human Body Model (HBM): Class 1B (500 to <1000V) in accordance with ANSI/ESD STM 5.1 - 2001 Machine Model (MM): Class M1 (>25V) in accordance with ANSI/ESD STM5.2-1999 MSL Rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D Performance Data Data Table Swept Graphs S-Parameter (S2P Files) Data Set (.zip file) Case Style MC1630-1 (2x2 mm MCLP) Plastic package, exposed paddle lead finish: tin-silver over nickel Tape & Reel F66 Standard quantities available on reel 7” reels with 20, 50, 100, 200, 500 or 1K devices Suggested Layout for PCB Design PL-493 Evaluation Board TB-901+ Environmental Ratings ENV08T1 Additional Detailed Technical Information additional information is available on our dash board. To access this information click here Stop Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp