LHX NICHICON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
ALUMINUM ELECTROLYTIC CAPACITORS LHX Snap-in Terminal Type, 125°C Long Life Assurance Drawing 10±0.1 2ʷφ2±0.1 (Terminal dimensions) (PC board hole dimensions) 4.0±0.5 ʢ2.5ʣ 1.5 0.8 +0.2 -0.1 +0.2-0.10.8+0.2 -0.1 Polarity bar ʢ10ʣ L±2.5 φD+1.5max. 4.0±0.5 Pressure relief vent Sleeve (Polyolefin) Type numbering system (Example : 450V 220 µF) L H X W M 9 1 0 E L 1 1 14 B 3 0 Configuration Case dia. code Case length code Capacitance tolerance (±20%) Rated capacitance (220µF) Rated voltage (450V) Series name Type φD Code B 35 C Frequency coefficient of rated ripple current Frequency (Hz) 50 60 120 300 1 k 10k 50k or more Specifications Performance CharacteristicsItem Rated Voltage Range Marking Category Temperature Range Rated Capacitance Range Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ) Stability at Low Temperature Endurance – 40 to +125°C 450V 220 to 680µF ± 20% at 120Hz, 20°C Printed with white color letter on black sleeve. The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 5000 hours at 125°C, the peak voltage shall not exceed the rated voltage. 0.20max. 120Hz at 20°C Impedance ratio Z(–25°C) / Z(+20°C) 8 (120Hz) Less than or equal to the initial specified value Within ± 20% of the initial capacitance value Leakage current Capacitance change tan δ 200% or less than the initial specified value Less than or equal to the initial specified value Within ± 15% of the initial capacitance value Leakage current Capacitance change tan δ 150% or less than the initial specified valueShelf Life After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the requirements listed at right. I (µA) (After 5 minutes' application of rated voltage at 20°C) [ C : Rated Capacitance (µF) V : Voltage (V)] 3 CV 3 CV 3 CV LHX LHT Dimensions 450V (2W) Cap. (µF) Size φD × L(mm) Rated ripple (mArms) Leakage Current (mA) Code 220 30 × 30 1120 0.94 LHX2W221MELB30 270 30 × 35 1270 1.04 LHX2W271MELB35 35 × 30 1340 1.04 LHX2W271MELC30 330 30 × 45 1480 1.15 LHX2W331MELB45 35 × 35 1510 1.15 LHX2W331MELC35 390 30 × 50 1640 1.25 LHX2W391MELB50 35 × 40 1700 1.25 LHX2W391MELC40 470 30 × 55 1840 1.37 LHX2W471MELB55 35 × 45 1910 1.37 LHX2W471MELC45 560 35 × 50 2130 1.50 LHX2W561MELC50 680 35 × 60 2430 1.65 LHX2W681MELC60 Rated ripple current (mArms) at 125°C 120Hz Long Life product of LHT series . Contributing to high temperature support and high reliability of equipment. Compliant of the RoHS directive (2011/65/EU,(EU)2015/863). Other terminations available upon request. Please refer to the Guidelines for Aluminum Electrolytic Capacitors. NEW long life assurance CAT.8100N