LHR4301-2

LHR4101-2 POWER-ONE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

www.power-one.com Edition 5/07.2001

• Class II equipment (double insulation)
• Short circuit protection
• Compact, low cost solution LHR, LGR 4/5000 Series 10...30 Watt AC-DC Converters Input voltage ranges 85...265 V AC 88…168 V DC 1 or 2 outputs up to 48 V DC

4300 V DC I/O electric strength test voltage

Output 1 Output 2 Input voltage Rated power Type U o nom Io nom U o nom Io nom U i TA = 50°C [V DC] [A] [V DC] [A] Po tot [W] 3.3 3 - - 10 LHR 4101-2 3.3 7 - - 23 LGR 4101-2 5 2 - - 10 LHR 4001-2 5 5 - - 25 LGR 4001-2 12 1.2 - - 14.4 LHR 4301-2 12 2.5 - - 30 LGR 4301-2 15 1 - - 15 LHR 4501-2 15 2 - - 30 LGR 4501-2 24 0.6 - - 85 … 264 V AC 14.4 LHR 4601-2 24 1.25 - - (47… 63 Hz) 30 LGR 4601-2 3.3 1.5 +5 1 88… 168 V DC 10 LHR 5101-2 3.3 2.5 +5 2.5 20.8 LGR 5101-2 +5 1.25 -5 1.25 12.5 LHR 5001-2 +5 2.5 -5 2.5 25 LGR 5001-2 +5 1 +12 0.5 11 LHR 5020-2 +5 2.5 +12 1.25 27.5 LGR 5020-2 +12 0.6 -12 0.6 14.4 LHR 5320-2 +12 1.25 -12 1.25 30 LGR 5320-2 +15 0.5 -15 0.5 15 LHR 5540-2 +15 1.0 -15 1.0 30 LGR 5540-2 +24 0.3 -24 0.3 15 LHR 5660-2 +24 0.625 -24 0.625 30 LGR 5660-2

www.power-one.com Edition 5/07.2001 Board Mountable LHR, LGR 4/5000 Series Input Input voltage continuous range 85...264 V AC / 88 … 168 V DC Input frequency 47...63 Hz Output Efficiency 230 V AC, Io nom up to 86% Output voltage switching noiseU i nom, Io nom, 20 MHz bandwidth, peak-peak <1% Line and load regulation U o1 U i min… U i max, (10… 100%) • Io nom ±1% Line and load regulation U o2 U i min… U i max, (10… 100%) • Io nom ±2% Minimum load not required on single output types recommended 0.1 Io nom on double output types Hold-up time 110/230 V AC, Io nom >10 ms Protection Output overload hiccup mode on LHR types / rectangular on LGR types Short circuit No load Control Trim /R ±80… 110% U o nom Safety and EMC Safety marks UL, ULc, CE Electric strength test voltage I/O 3000 V AC Electrostatic discharge IEC/EN 61000-4-2, level 4 (15 kV) criterion A Electromagnetic field IEC/EN 61000-4-3, level 3 (10 V/m) criterion A Electr. fast transients/burst IEC/EN 61000-4-4, level 3 (i, ±2 kV) criterion A Surge IEC/EN 61000-4-5, level 3 (2 kV) criterion A Electromagnetic emissions CISPR 22/EN 55022, conducted class B

900 MHz Test ENV50204, 3V/m criterion A

Ambient temperature U i nom, Io nom, convection cooled –10...50°C Storage temperature non operational –40...100°C Relative humidity non condensing 5...95% Shock peak acceleration 20 g n Random vibration 2 gn rms Options Trim pin not fitted (single output units only)

www.power-one.com Edition 5/07.2001 Mechanical data Tolerances ±0.3 mm (0.012") unless otherwise indicated. European Projection 50.8 (2") 23 (0.91") +0.5/-0 76.2 (3") S09005 Measuring point of case temperature TC 25.4 (1") 40.6 (1.59") 7.6 (0.3") 66 (2.60") 4.5 (0.18") 10.1 (0.4") ø 0.8x0.8 41.7 (1.64") 63.5 (2.5") 25.4 (1") 88.9 (3.5") S09006 Measuring point of case temperature TC 81.2 (3.2") 4.5 (0.18") ø 0.8 x 0.8 55.9 (2.28") 6 4 54.4 (2.14") LHR LGR LHR, LGR 4/5000 Series 10...30 Watt AC-DC Converters

www.power-one.com Edition 5/07.2001 Pin allocation LHR Pin Electrical determination LHR 4/5000 Dual Single Dual assym.

1 Input voltage L L L

2 Input voltage N N N

3 Output positive Vo+ Vo+ Vo1+

4 Control input Trim … /Trim … /Trim

1 … /Trim1

5 Output negative - Vo - -

Output return potential Vo- - Go 6 Output return potential or positive n.c. Go Vo2+ 1 Pin not fitted with option K. Board Mountable LHR, LGR 4/5000 Series Pin allocation LGR Pin Electrical determination LGR 4/5000 Dual Single Dual assym.

4 Control input Trim - … /R

1 … /R1

5 Output return potential Vo - Go Go

7 R input … /R1 --

Output negative or positive - Vo- Vo2+ 1 Pin not fitted with option K.