LHL10124J | DigiCamel IC Datasheet

Online Datasheet

Read LHL10124J online.

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 20

Technical content

Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS ˙ Product information in this catalog is as of October 2014. All of the contents speciﬁed herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be- fore practical application or usage of the Products. Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipm ent incor- porating such products, which are caused under the conditions other than those speciﬁed in this catalog or indi- vidual speciﬁcation. ˙ Please contact TAIYO YUDEN CO., LTD. for further details of product speciﬁcations as the individual speciﬁcation is available. ˙ Please conduct validation and veriﬁcation of products in actual condition of mounting and operating environment before commercia l shipment of the equipment. ˙ All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the ﬁeld such as tran sportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct inﬂuence to harm or injure a human body, please contact TAIYO YUDEN CO., LTD. for more detail in ad- vance. Do not incorporate the products into any equipment in ﬁelds such as aerospace, aviation , nuclear control, subma- rine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufﬁcient reliabil- ity evaluation check for safety shall be performe d bef ore commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. ˙ The contents of this catalog are applicable to the products which are purchased from our sales ofﬁces or distribu- tors (so called ʠTAIYO YUDENʟs ofﬁcial sales channel ʡ). It is only applicable to the products purchased from any of TAIYO YUDEN ʟ s ofﬁcial sales channel. ˙ Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. TAIYO YUDEN CO., LTD. grants no license for such rights. ˙ Caution for export Certain items in this catalog may require speciﬁ c procedures for export according to ʠForeign Exchange and For- eign Trade Control Law ʡ of Japan, ʠU.S. Export Administration Regulations ʡ, and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff.

i_leaded_LH_e-E03R02 RADIAL LEADED INDUCTORS ■PARTS NUMBER *Operating Temp. : -25～+105℃（Including self-generated heat） L H △ L △ 0 8 T B 1 0 1 K △ △ △ △＝Blank space ① ② ③ ④ ⑤ ⑥ ⑦ ①Series name Code Series name LH△ Radial leaded inductor ②Characteristics Code Characteristics L△ Standard type Taping available LP Shielded type Bulk LC High current type ③Dimensions（D） Code Dimensions（D）［mm max.］ 08 9.0 10 11.0 12 13.0 13 14.0 16 17.0 ④Packaging Code Packaging NB Bulk（LHL） TB Ammo packaging（LHL） ⑤Nominal inductance Code （example） Nominal inductance［μH］ 1R0 1.0 150 15 102 1000 ※R＝Decimal point ⑥Inductance tolerance Code Inductance tolerance J ±5％ K ±10％ M ±20％ N ±30％ ⑦Internal code Code Internal code △△△ Standard ■STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY LHL /LHLC LHLP Type D H2 ℓ F φd Standard quantity [pcs] Box Bulk Taping LH L 08 LH LC08 9.0 max （0.354 max） 9.5 max （0.374 max） 5.0±1.0 （0.197±0.039） 5.0±1.0 （0.197±0.039） 0.6±0.05 （0.024±0.002）－ 100 1000 LH L 10 LH LC10 11.0 max （0.433 max） 14.0 max （0.551 max） 5.0±1.0 （0.197±0.039） 5.0±1.0 （0.197±0.039） 0.6±0.05 LH L 13 14.0 max （0.551 max） 17.0 max （0.669 max） 5.0±1.0 （0.197±0.039） 7.5±1.0 （0.295±0.039） 0.8±0.05 LH LP10 11.0 max （0.433 max） 11.0 max （0.433 max） 5.0±1.0 （0.197±0.039） 5.0±1.0 （0.197±0.039） 0.6±0.05 LH LP12 13.0 max （0.512 max） 16.0 max （0.624 max） 5.0±1.0 （0.197±0.039） 5.0±1.0 （0.197±0.039） 0.6±0.05 LH LP16 17.0 max （0.669 max） 19.0 max （0.741 max） 5.0±1.0 （0.197±0.039） 7.5±1.0 （0.295±0.039） 0.8±0.05 Unit：mm（inch） ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) INDUCTORS ／LEADED INDUCTORS RADIAL LEADED INDUCTORS WAVE

■PARTS NUMBER

LHL08 LH L 08[]1R0N RoHS 1.0 ±30％ 40 76 0.013 4.7 7.96 LH L 08[]1R5M RoHS 1.5 ±20％ 40 65 0.014 4.4 7.96 LH L 08[]2R2M RoHS 2.2 ±20％ 40 56 0.017 4.1 7.96 LH L 08[]2R7M RoHS 2.7 ±20％ 40 48 0.019 3.5 7.96 LH L 08[]3R3M RoHS 3.3 ±20％ 40 41 0.021 3.2 7.96 LH L 08[]3R9M RoHS 3.9 ±20％ 40 33 0.024 3.1 7.96 LH L 08[]4R7M RoHS 4.7 ±20％ 40 30 0.025 3.0 7.96 LH L 08[]5R6M RoHS 5.6 ±20％ 40 23 0.028 2.9 7.96 LH L 08[]6R8M RoHS 6.8 ±20％ 40 21 0.030 2.8 7.96 LH L 08[]8R2M RoHS 8.2 ±20％ 40 19 0.034 2.5 7.96 LH L 08[]100K RoHS 10 ±10％ 65 17 0.041 2.4 2.52 LH L 08[]120K RoHS 12 ±10％ 65 16 0.044 2.3 2.52 LH L 08[]150K RoHS 15 ±10％ 50 13 0.053 2.0 2.52 LH L 08[]180K RoHS 18 ±10％ 50 12 0.060 1.9 2.52 LH L 08[]220K RoHS 22 ±10％ 50 11 0.068 1.8 2.52 LH L 08[]270K RoHS 27 ±10％ 50 10 0.091 1.5 2.52 LH L 08[]330K RoHS 33 ±10％ 40 8.8 0.10 1.4 2.52 LH L 08[]390K RoHS 39 ±10％ 40 8.4 0.12 1.3 2.52 LH L 08[]470K RoHS 47 ±10％ 40 8.2 0.15 1.2 2.52 LH L 08[]560K RoHS 56 ±10％ 40 7.9 0.17 1.1 2.52 LH L 08[]680K RoHS 68 ±10％ 35 7.0 0.20 1.0 2.52 LH L 08[]820K RoHS 82 ±10％ 35 6.5 0.22 0.90 2.52 LH L 08[]101K RoHS 100 ±10％ 25 5.7 0.32 0.79 0.796 LH L 08[]121K RoHS 120 ±10％ 25 5.2 0.36 0.70 0.796 LH L 08[]151K RoHS 150 ±10％ 20 4.7 0.41 0.64 0.796 LH L 08[]181K RoHS 180 ±10％ 35 4.2 0.66 0.60 0.796 LH L 08[]221K RoHS 220 ±10％ 35 3.7 0.73 0.53 0.796 LH L 08[]271K RoHS 270 ±10％ 25 3.5 0.85 0.51 0.796 LH L 08[]331K RoHS 330 ±10％ 25 3.2 0.97 0.44 0.796 LH L 08[]391K RoHS 390 ±10％ 20 2.9 1.1 0.41 0.796 LH L 08[]471K RoHS 470 ±10％ 25 2.4 1.3 0.38 0.796 LH L 08[]561K RoHS 560 ±10％ 25 2.2 1.5 0.35 0.796 LH L 08[]681K RoHS 680 ±10％ 25 2.0 1.8 0.32 0.796 LH L 08[]821K RoHS 820 ±10％ 30 1.6 2.3 0.30 0.796 LH L 08[]102J RoHS 1000 ±5％ 55 1.5 2.7 0.25 0.252 LH L 08[]122J RoHS 1200 ±5％ 45 1.4 3.2 0.22 0.252 LH L 08[]152J RoHS 1500 ±5％ 55 1.3 4.1 0.20 0.252 LH L 08[]182J RoHS 1800 ±5％ 55 1.2 4.8 0.19 0.252 LH L 08[]222J RoHS 2200 ±5％ 55 1.1 5.6 0.16 0.252 LH L 08[]272J RoHS 2700 ±5％ 55 1.0 7.5 0.15 0.252 LH L 08[]332J RoHS 3300 ±5％ 55 0.85 8.5 0.14 0.252 LH L 08[]392J RoHS 3900 ±5％ 55 0.78 9.7 0.11 0.252 LH L 08[]472J RoHS 4700 ±5％ 65 0.68 14 0.10 0.252 LH L 08[]562J RoHS 5600 ±5％ 65 0.62 16 0.093 0.252 LH L 08[]682J RoHS 6800 ±5％ 65 0.61 18 0.092 0.252 LH L 08[]822J RoHS 8200 ±5％ 65 0.60 20 0.084 0.252 LH L 08[]103J RoHS 10000 ±5％ 60 0.48 32 0.070 L：1kHz ， Q：0.0796MHz LH L 08[]123J RoHS 12000 ±5％ 60 0.44 36 0.064 L：1kHz ， Q：0.0796MHz LH L 08[]153J RoHS 15000 ±5％ 60 0.35 62 0.051 L：1kHz ， Q：0.0796MHz LH L 08[]183J RoHS 18000 ±5％ 60 0.30 72 0.048 L：1kHz ， Q：0.0796MHz LH L 08[]223J RoHS 22000 ±5％ 60 0.28 82 0.044 L：1kHz ， Q：0.0796MHz LH L 08[]273J RoHS 27000 ±5％ 60 0.25 90 0.042 L：1kHz ， Q：0.0796MHz LH L 08[]333J RoHS 33000 ±5％ 60 0.23 100 0.040 L：1kHz ， Q：0.0796MHz ・ [] Please specify the packaging code. (TB: Taping, NB: Bulk) Measuring frequency ［MHz］ DC Resistance ［Ω］（max.） Rated current ［A］（max.）Parts number EHS Nominal inductance ［μH］ Inductance tolerance Q （min.） Self-resonant frequency ［MHｚ］（min..） i_leaded_LH_e-E02R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) INDUCTORS ／LEADED INDUCTORS

■PARTS NUMBER

LHL10 LH L 10[]3R3M RoHS 3.3 ±20％ 50 46 0.019 4.2 7.96 LH L 10[]3R9M RoHS 3.9 ±20％ 50 40 0.022 4.1 7.96 LH L 10[]4R7M RoHS 4.7 ±20％ 50 38 0.024 4.0 7.96 LH L 10[]5R6M RoHS 5.6 ±20％ 50 34 0.025 3.8 7.96 LH L 10[]6R8M RoHS 6.8 ±20％ 50 30 0.028 3.4 7.96 LH L 10[]8R2M RoHS 8.2 ±20％ 50 24 0.031 3.3 7.96 LH L 10[]100K RoHS 10 ±10％ 90 19 0.034 3.2 2.52 LH L 10[]120K RoHS 12 ±10％ 90 16 0.038 2.8 2.52 LH L 10[]150K RoHS 15 ±10％ 90 12 0.042 2.6 2.52 LH L 10[]180K RoHS 18 ±10％ 90 9.2 0.046 2.4 2.52 LH L 10[]220K RoHS 22 ±10％ 60 8.6 0.061 2.1 2.52 LH L 10[]270K RoHS 27 ±10％ 60 7.1 0.069 2.0 2.52 LH L 10[]330K RoHS 33 ±10％ 60 6.8 0.078 1.9 2.52 LH L 10[]390K RoHS 39 ±10％ 60 6.7 0.085 1.8 2.52 LH L 10[]470K RoHS 47 ±10％ 50 6.2 0.093 1.7 2.52 LH L 10[]560K RoHS 56 ±10％ 50 5.2 0.10 1.6 2.52 LH L 10[]680K RoHS 68 ±10％ 40 4.9 0.12 1.5 2.52 LH L 10[]820K RoHS 82 ±10％ 40 4.7 0.13 1.4 2.52 LH L 10[]101K RoHS 100 ±10％ 40 3.8 0.18 1.2 0.796 LH L 10[]121K RoHS 120 ±10％ 40 3.2 0.25 1.0 0.796 LH L 10[]151K RoHS 150 ±10％ 40 2.9 0.29 0.95 0.796 LH L 10[]181K RoHS 180 ±10％ 40 2.6 0.40 0.80 0.796 LH L 10[]221K RoHS 220 ±10％ 40 2.3 0.44 0.75 0.796 LH L 10[]271K RoHS 270 ±10％ 30 2.1 0.50 0.70 0.796 LH L 10[]331K RoHS 330 ±10％ 30 2.0 0.56 0.68 0.796 LH L 10[]391K RoHS 390 ±10％ 30 1.8 0.62 0.63 0.796 LH L 10[]471K RoHS 470 ±10％ 30 1.7 0.84 0.57 0.796 LH L 10[]561K RoHS 560 ±10％ 30 1.5 0.93 0.52 0.796 LH L 10[]681K RoHS 680 ±10％ 30 1.4 1.0 0.48 0.796 LH L 10[]821K RoHS 820 ±10％ 30 1.3 1.4 0.42 0.796 LH L 10[]102J RoHS 1000 ±5％ 50 1.2 1.8 0.41 0.252 LH L 10[]122J RoHS 1200 ±5％ 50 0.87 2.3 0.33 0.252 LH L 10[]152J RoHS 1500 ±5％ 50 0.83 2.7 0.30 0.252 LH L 10[]182J RoHS 1800 ±5％ 50 0.75 3.0 0.29 0.252 LH L 10[]222J RoHS 2200 ±5％ 50 0.70 3.9 0.25 0.252 LH L 10[]272J RoHS 2700 ±5％ 50 0.67 4.3 0.24 0.252 LH L 10[]332J RoHS 3300 ±5％ 50 0.56 5.8 0.21 0.252 LH L 10[]392J RoHS 3900 ±5％ 50 0.54 6.4 0.20 0.252 LH L 10[]472J RoHS 4700 ±5％ 50 0.49 7.1 0.19 0.252 LH L 10[]562J RoHS 5600 ±5％ 50 0.41 9.0 0.17 0.252 LH L 10[]682J RoHS 6800 ±5％ 50 0.38 10 0.16 0.252 LH L 10[]822J RoHS 8200 ±5％ 50 0.36 12 0.15 0.252 LH L 10[]103J RoHS 10000 ±5％ 60 0.29 19 0.12 L：1kHz ， Q：0.0796MHz LH L 10[]123J RoHS 12000 ±5％ 60 0.27 21 0.11 L：1kHz ， Q：0.0796MHz LH L 10[]153J RoHS 15000 ±5％ 60 0.24 34 0.090 L：1kHz ， Q：0.0796MHz LH L 10[]183J RoHS 18000 ±5％ 60 0.21 38 0.081 L：1kHz ， Q：0.0796MHz LH L 10[]223J RoHS 22000 ±5％ 60 0.20 43 0.075 L：1kHz ， Q：0.0796MHz LH L 10[]273J RoHS 27000 ±5％ 40 0.15 67 0.060 L：1kHz ， Q：0.0796MHz LH L 10[]333J RoHS 33000 ±5％ 40 0.14 76 0.056 L：1kHz ， Q：0.0796MHz LH L 10[]393J RoHS 39000 ±5％ 40 0.13 84 0.053 L：1kHz ， Q：0.0796MHz LH L 10[]473J RoHS 47000 ±5％ 40 0.12 96 0.050 L：1kHz ， Q：0.0796MHz LH L 10[]563J RoHS 56000 ±5％ 30 0.10 170 0.036 L：1kHz ， Q：0.0796MHz LH L 10[]683J RoHS 68000 ±5％ 30 0.095 200 0.035 L：1kHz ， Q：0.0796MHz LH L 10[]823J RoHS 82000 ±5％ 30 0.088 210 0.033 L：1kHz ， Q：0.0796MHz LH L 10[]104J RoHS 100000 ±5％ 30 0.085 240 0.031 L：1kHz ， Q：0.0252MHz LH L 10[]124J RoHS 120000 ±5％ 30 0.070 260 0.030 L：1kHz ， Q：0.0252MHz LH L 10[]154J RoHS 150000 ±5％ 30 0.069 300 0.028 L：1kHz ， Q：0.0252MHz
LHL13 LH L 13[]100K RoHS 10 ±10％ 140 19 0.023 4.5 2.52 LH L 13[]150K RoHS 15 ±10％ 140 12 0.028 4.0 2.52 LH L 13[]220K RoHS 22 ±10％ 100 7.6 0.035 3.4 2.52 LH L 13[]330K RoHS 33 ±10％ 100 6.9 0.043 3.2 2.52 LH L 13[]470K RoHS 47 ±10％ 70 5.6 0.052 2.8 2.52 LH L 13[]680K RoHS 68 ±10％ 50 4.4 0.070 2.4 2.52 LH L 13[]101K RoHS 100 ±10％ 50 3.3 0.12 2.0 0.796 LH L 13[]151K RoHS 150 ±10％ 50 2.6 0.19 1.5 0.796 LH L 13[]221K RoHS 220 ±10％ 40 2.2 0.23 1.3 0.796 LH L 13[]331K RoHS 330 ±10％ 30 1.8 0.35 1.1 0.796 LH L 13[]471K RoHS 470 ±10％ 30 1.5 0.43 0.90 0.796 LH L 13[]681K RoHS 680 ±10％ 30 1.2 0.61 0.80 0.796 LH L 13[]102J RoHS 1000 ±5％ 30 1.0 1.2 0.60 0.252 LH L 13[]152J RoHS 1500 ±5％ 40 0.83 1.8 0.45 0.252 LH L 13[]222J RoHS 2200 ±5％ 40 0.70 2.2 0.40 0.252 LH L 13[]332J RoHS 3300 ±5％ 40 0.60 3.4 0.33 0.252 LH L 13[]472J RoHS 4700 ±5％ 40 0.43 4.7 0.28 0.252 LH L 13[]682J RoHS 6800 ±5％ 30 0.38 5.6 0.25 0.252 LH L 13[]103J RoHS 10000 ±5％ 70 0.30 10 0.19 L：1kHz ， Q：0.0796MHz ・ [] Please specify the packaging code. (TB: Taping, NB: Bulk) Parts number EHS Nominal inductance ［μH］ Inductance tolerance Q （min.） Self-resonant frequency ［MHｚ］（min..） DC Resistance ［Ω］（max.） Rated current ［A］（max.） Measuring frequency ［MHz］ Parts number EHS Nominal inductance ［μH］ Inductance tolerance Q （min.） Self-resonant frequency ［MHｚ］（min..） DC Resistance ［Ω］（max.） Rated current ［A］（max.） Measuring frequency ［MHz］ i_leaded_LH_e-E02R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) INDUCTORS ／LEADED INDUCTORS

■PARTS NUMBER

LHLP10 LH LP10[]100M RoHS 10 ±20％ 0.038 2.5 2.52 LH LP10[]150M RoHS 15 ±20％ 0.049 2.2 2.52 LH LP10[]220M RoHS 22 ±20％ 0.075 1.9 2.52 LH LP10[]330M RoHS 33 ±20％ 0.094 1.7 2.52 LH LP10[]470M RoHS 47 ±20％ 0.15 1.3 2.52 LH LP10[]680M RoHS 68 ±20％ 0.23 1.0 2.52 LH LP10[]101K RoHS 100 ±10％ 0.30 0.90 0.796 LH LP10[]151K RoHS 150 ±10％ 0.47 0.78 0.796 LH LP10[]221K RoHS 220 ±10％ 0.70 0.63 0.796 LH LP10[]331K RoHS 330 ±10％ 0.88 0.58 0.796 LH LP10[]471K RoHS 470 ±10％ 1.3 0.46 0.796 LH LP10[]681K RoHS 680 ±10％ 1.9 0.38 0.796 LH LP10[]102K RoHS 1000 ±10％ 3.2 0.30 0.252
LHLP12NB LH LP12NB150M RoHS 15 ±20％ 0.035 3.3 2.52 LH LP12NB220M RoHS 22 ±20％ 0.050 2.7 2.52 LH LP12NB330M RoHS 33 ±20％ 0.070 2.4 2.52 LH LP12NB470M RoHS 47 ±20％ 0.081 2.1 2.52 LH LP12NB680M RoHS 68 ±20％ 0.12 1.7 2.52 LH LP12NB101K RoHS 100 ±10％ 0.16 1.6 0.796 LH LP12NB151K RoHS 150 ±10％ 0.24 1.3 0.796 LH LP12NB221K RoHS 220 ±10％ 0.38 0.95 0.796 LH LP12NB331K RoHS 330 ±10％ 0.46 0.89 0.796 LH LP12NB471K RoHS 470 ±10％ 0.69 0.74 0.796 LH LP12NB681K RoHS 680 ±10％ 1.1 0.58 0.796 LH LP12NB102K RoHS 1000 ±10％ 1.8 0.46 0.252
LHLP16NB LH LP16NB100M RoHS 10 ±20％ 0.019 5.2 1 LH LP16NB150M RoHS 15 ±20％ 0.025 5.1 1 LH LP16NB220M RoHS 22 ±20％ 0.027 4.6 1 LH LP16NB330M RoHS 33 ±20％ 0.035 4.0 1 LH LP16NB470K RoHS 47 ±10％ 0.045 3.4 1 LH LP16NB680K RoHS 68 ±10％ 0.062 3.1 1 LH LP16NB101K RoHS 100 ±10％ 0.091 2.3 1 LH LP16NB151K RoHS 150 ±10％ 0.14 1.9 1 LH LP16NB221K RoHS 220 ±10％ 0.20 1.5 1 LH LP16NB331K RoHS 330 ±10％ 0.31 1.3 1 LH LP16NB471K RoHS 470 ±10％ 0.47 1.0 1 LH LP16NB681K RoHS 680 ±10％ 0.58 0.98 1 LH LP16NB102K RoHS 1000 ±10％ 0.94 0.74 1 ・ [] Please specify the packaging code. (TB: Taping, NB: Bulk) DC Resistance ［Ω］（max.） DC Resistance ［Ω］（max.） Nominal inductance ［μH］ Parts number EHS Nominal inductance ［μH］ Inductance tolerance Rated current ［A］（max.） Inductance Measuring frequency ［MHz］ Inductance tolerance DC Resistance ［Ω］（max.） Rated current ［A］（max.） Inductance Measuring frequency ［MHz］ Parts number EHS Nominal inductance ［μH］ Inductance tolerance Rated current ［A］（max.） Inductance Measuring frequency ［MHz］ Parts number EHS i_leaded_LH_e-E03R02 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) INDUCTORS ／LEADED INDUCTORS

■PARTS NUMBER

LHLC08 LH LC08[]1R0N RoHS 1.0 ±30％ 40 76 0.013 5.4 7.96 LH LC08[]1R5M RoHS 1.5 ±20％ 40 65 0.014 5.2 7.96 LH LC08[]2R2M RoHS 2.2 ±20％ 40 56 0.017 4.8 7.96 LH LC08[]2R7M RoHS 2.7 ±20％ 40 48 0.019 4.2 7.96 LH LC08[]3R3M RoHS 3.3 ±20％ 40 41 0.021 3.8 7.96 LH LC08[]3R9M RoHS 3.9 ±20％ 40 33 0.024 3.7 7.96 LH LC08[]4R7M RoHS 4.7 ±20％ 40 30 0.025 3.6 7.96 LH LC08[]5R6M RoHS 5.6 ±20％ 40 23 0.028 3.5 7.96 LH LC08[]6R8M RoHS 6.8 ±20％ 40 21 0.030 3.4 7.96 LH LC08[]8R2M RoHS 8.2 ±20％ 40 19 0.034 3.0 7.96 LH LC08[]100K RoHS 10 ±10％ 65 17 0.041 2.9 2.52 LH LC08[]120K RoHS 12 ±10％ 65 16 0.044 2.8 2.52 LH LC08[]150K RoHS 15 ±10％ 50 13 0.053 2.6 2.52 LH LC08[]180K RoHS 18 ±10％ 50 12 0.060 2.4 2.52 LH LC08[]220K RoHS 22 ±10％ 50 11 0.068 2.3 2.52 LH LC08[]270K RoHS 27 ±10％ 50 10 0.091 2.0 2.52 LH LC08[]330K RoHS 33 ±10％ 40 8.8 0.10 1.9 2.52 LH LC08[]390K RoHS 39 ±10％ 40 8.4 0.12 1.7 2.52 LH LC08[]470K RoHS 47 ±10％ 40 8.2 0.15 1.5 2.52 LH LC08[]560K RoHS 56 ±10％ 40 7.9 0.17 1.4 2.52 LH LC08[]680K RoHS 68 ±10％ 35 7.0 0.20 1.3 2.52 LH LC08[]820K RoHS 82 ±10％ 35 6.5 0.22 1.2 2.52 LH LC08[]101K RoHS 100 ±10％ 25 5.7 0.32 1.0 0.796 LH LC08[]121K RoHS 120 ±10％ 25 5.2 0.36 0.96 0.796 LH LC08[]151K RoHS 150 ±10％ 20 4.7 0.41 0.88 0.796 LH LC08[]181K RoHS 180 ±10％ 35 4.2 0.66 0.71 0.796 LH LC08[]221K RoHS 220 ±10％ 35 3.7 0.73 0.66 0.796 LH LC08[]271K RoHS 270 ±10％ 25 3.5 0.85 0.63 0.796 LH LC08[]331K RoHS 330 ±10％ 25 3.2 0.97 0.59 0.796 LH LC08[]391K RoHS 390 ±10％ 20 2.9 1.1 0.55 0.796 LH LC08[]471K RoHS 470 ±10％ 25 2.4 1.3 0.49 0.796 LH LC08[]561K RoHS 560 ±10％ 25 2.2 1.5 0.47 0.796 LH LC08[]681K RoHS 680 ±10％ 25 2.0 1.8 0.44 0.796 LH LC08[]821K RoHS 820 ±10％ 30 1.6 2.3 0.38 0.796 LH LC08[]102J RoHS 1000 ±5％ 55 1.5 2.7 0.35 0.252 LH LC08[]122J RoHS 1200 ±5％ 45 1.4 3.2 0.31 0.252 LH LC08[]152J RoHS 1500 ±5％ 55 1.3 4.1 0.29 0.252 LH LC08[]182J RoHS 1800 ±5％ 55 1.2 4.8 0.26 0.252 LH LC08[]222J RoHS 2200 ±5％ 55 1.1 5.6 0.23 0.252 LH LC08[]272J RoHS 2700 ±5％ 55 1.0 7.5 0.21 0.252 LH LC08[]332J RoHS 3300 ±5％ 55 0.85 8.5 0.19 0.252 LH LC08[]392J RoHS 3900 ±5％ 55 0.78 9.7 0.18 0.252 LH LC08[]472J RoHS 4700 ±5％ 65 0.68 14 0.16 0.252 LH LC08[]562J RoHS 5600 ±5％ 65 0.62 16 0.15 0.252 LH LC08[]682J RoHS 6800 ±5％ 65 0.61 18 0.14 0.252 LH LC08[]822J RoHS 8200 ±5％ 65 0.60 20 0.13 0.252 LH LC08[]103J RoHS 10000 ±5％ 60 0.48 32 0.11 L：1kHz ， Q：0.0796MHz LH LC08[]123J RoHS 12000 ±5％ 60 0.44 36 0.084 L：1kHz ， Q：0.0796MHz LH LC08[]153J RoHS 15000 ±5％ 60 0.35 62 0.068 L：1kHz ， Q：0.0796MHz LH LC08[]183J RoHS 18000 ±5％ 60 0.30 72 0.066 L：1kHz ， Q：0.0796MHz LH LC08[]223J RoHS 22000 ±5％ 60 0.28 82 0.057 L：1kHz ， Q：0.0796MHz LH LC08[]273J RoHS 27000 ±5％ 60 0.25 90 0.054 L：1kHz ， Q：0.0796MHz LH LC08[]333J RoHS 33000 ±5％ 60 0.23 100 0.053 L：1kHz ， Q：0.0796MHz ・ [] Please specify the packaging code. (TB: Taping, NB: Bulk) Parts number EHS Nominal inductance ［μH］ Inductance tolerance Q （min.） Self-resonant frequency ［MHｚ］（min..） DC Resistance ［Ω］（max.） Rated current ［A］（max.） Measuring frequency ［MHz］ i_leaded_LH_e-E02R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) INDUCTORS ／LEADED INDUCTORS

■PARTS NUMBER

LHLC10 LH LC10[]3R3M RoHS 3.3 ±20％ 50 46 0.019 5.0 7.96 LH LC10[]3R9M RoHS 3.9 ±20％ 50 40 0.022 4.8 7.96 LH LC10[]4R7M RoHS 4.7 ±20％ 50 38 0.024 4.7 7.96 LH LC10[]5R6M RoHS 5.6 ±20％ 50 34 0.025 4.5 7.96 LH LC10[]6R8M RoHS 6.8 ±20％ 50 30 0.028 4.1 7.96 LH LC10[]8R2M RoHS 8.2 ±20％ 50 24 0.031 3.9 7.96 LH LC10[]100K RoHS 10 ±10％ 90 19 0.034 3.6 2.52 LH LC10[]120K RoHS 12 ±10％ 90 16 0.038 3.4 2.52 LH LC10[]150K RoHS 15 ±10％ 90 12 0.042 3.2 2.52 LH LC10[]180K RoHS 18 ±10％ 90 9.2 0.046 3.0 2.52 LH LC10[]220K RoHS 22 ±10％ 60 8.6 0.061 2.8 2.52 LH LC10[]270K RoHS 27 ±10％ 60 7.1 0.069 2.7 2.52 LH LC10[]330K RoHS 33 ±10％ 60 6.8 0.078 2.6 2.52 LH LC10[]390K RoHS 39 ±10％ 60 6.7 0.085 2.4 2.52 LH LC10[]470K RoHS 47 ±10％ 50 6.2 0.093 2.3 2.52 LH LC10[]560K RoHS 56 ±10％ 50 5.2 0.10 2.1 2.52 LH LC10[]680K RoHS 68 ±10％ 40 4.6 0.12 2.0 2.52 LH LC10[]820K RoHS 82 ±10％ 40 4.7 0.13 1.8 2.52 LH LC10[]101K RoHS 100 ±10％ 40 3.8 0.18 1.5 0.796 LH LC10[]121K RoHS 120 ±10％ 40 3.2 0.25 1.3 0.796 LH LC10[]151K RoHS 150 ±10％ 40 2.9 0.29 1.2 0.796 LH LC10[]181K RoHS 180 ±10％ 40 2.6 0.40 1.0 0.796 LH LC10[]221K RoHS 220 ±10％ 40 2.3 0.44 0.97 0.796 LH LC10[]271K RoHS 270 ±10％ 30 2.1 0.50 0.90 0.796 LH LC10[]331K RoHS 330 ±10％ 30 2.0 0.56 0.86 0.796 LH LC10[]391K RoHS 390 ±10％ 30 1.8 0.62 0.75 0.796 LH LC10[]471K RoHS 470 ±10％ 30 1.7 0.84 0.65 0.796 LH LC10[]561K RoHS 560 ±10％ 30 1.5 0.93 0.61 0.796 LH LC10[]681K RoHS 680 ±10％ 30 1.4 1.0 0.57 0.796 LH LC10[]821K RoHS 820 ±10％ 30 1.3 1.4 0.50 0.796 LH LC10[]102J RoHS 1000 ±5％ 50 1.2 1.8 0.48 0.252 LH LC10[]122J RoHS 1200 ±5％ 50 0.87 2.3 0.40 0.252 LH LC10[]152J RoHS 1500 ±5％ 50 0.83 2.7 0.37 0.252 LH LC10[]182J RoHS 1800 ±5％ 50 0.75 3.0 0.36 0.252 LH LC10[]222J RoHS 2200 ±5％ 50 0.70 3.9 0.32 0.252 LH LC10[]272J RoHS 2700 ±5％ 50 0.67 4.3 0.30 0.252 LH LC10[]332J RoHS 3300 ±5％ 50 0.56 5.8 0.26 0.252 LH LC10[]392J RoHS 3900 ±5％ 50 0.54 6.4 0.25 0.252 LH LC10[]472J RoHS 4700 ±5％ 50 0.49 7.1 0.24 0.252 LH LC10[]562J RoHS 5600 ±5％ 50 0.41 9.0 0.21 0.252 LH LC10[]682J RoHS 6800 ±5％ 50 0.38 10 0.20 0.252 LH LC10[]822J RoHS 8200 ±5％ 50 0.36 12 0.18 0.252 LH LC10[]103J RoHS 10000 ±5％ 60 0.29 19 0.14 L：1kHz ， Q：0.0796MHz LH LC10[]123J RoHS 12000 ±5％ 60 0.27 21 0.13 L：1kHz ， Q：0.0796MHz LH LC10[]153J RoHS 15000 ±5％ 60 0.24 34 0.11 L：1kHz ， Q：0.0796MHz LH LC10[]183J RoHS 18000 ±5％ 60 0.21 38 0.10 L：1kHz ， Q：0.0796MHz LH LC10[]223J RoHS 22000 ±5％ 60 0.20 43 0.095 L：1kHz ， Q：0.0796MHz LH LC10[]273J RoHS 27000 ±5％ 40 0.15 67 0.076 L：1kHz ， Q：0.0796MHz LH LC10[]333J RoHS 33000 ±5％ 40 0.14 76 0.068 L：1kHz ， Q：0.0796MHz LH LC10[]393J RoHS 39000 ±5％ 40 0.13 84 0.065 L：1kHz ， Q：0.0796MHz LH LC10[]473J RoHS 47000 ±5％ 40 0.12 96 0.061 L：1kHz ， Q：0.0796MHz LH LC10[]563J RoHS 56000 ±5％ 30 0.10 170 0.045 L：1kHz ， Q：0.0796MHz LH LC10[]683J RoHS 68000 ±5％ 30 0.095 200 0.043 L：1kHz ， Q：0.0796MHz LH LC10[]823J RoHS 82000 ±5％ 30 0.088 210 0.041 L：1kHz ， Q：0.0796MHz LH LC10[]104J RoHS 100000 ±5％ 30 0.085 240 0.038 L：1kHz ， Q：0.0252MHz LH LC10[]124J RoHS 120000 ±5％ 30 0.070 260 0.037 L：1kHz ， Q：0.0252MHz LH LC10[]154J RoHS 150000 ±5％ 30 0.069 300 0.035 L：1kHz ， Q：0.0252MHz ・ [] Please specify the packaging code. (TB: Taping, NB: Bulk) Parts number EHS Nominal inductance ［μH］ Inductance tolerance Q （min.） Self-resonant frequency ［MHｚ］（min..） DC Resistance ［Ω］（max.） Rated current ［A］（max.） Measuring frequency ［MHz］ i_leaded_LH_e-E02R01 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) INDUCTORS ／LEADED INDUCTORS

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_leaded_LH_pack_e-E03R02 RADIAL LEADED INDUCTORS ■PACKAGING ①Minimum Quantity Type (EIA) Standard quantity [pcs] Box Bulk Taped LHL 08 － 100 1000 LHL 10 － 50 500 LHL 13 － 25 500 LHLP10 500 － 200 LHLP12NB 300 －－ LHLP16NB 200 －－ LHLC08 － 100 1000 LHLC10 － 50 500 ②Bulk dimensions

LHL08～13 Type Dimensions LHL08 9.0 （0.354） 9.5 （0.374） 5.0±1.0 （0.197±0.039） 5.0±1.0 （0.197±0.039） 0.6±0.05 （0.024±0.002） LHL10 11.0 （0.433） 14.0 （0.551） 5.0±1.0 （0.197±0.039） 5.0±1.0 （0.197±0.039） 0.6±0.05 （0.024±0.002） LHL13 14.0 （0.551） 17.0 （0.669） 7.5±1.0 （0.295±0.039） 5.0±1.0 （0.197±0.039） 0.8±0.05 （0.031±0.002） Unit：mm（inch） *Measured at the base of the leads.
LHLP10～16 Type Dimensions LHLP10 11.0 （0.433） 11.0 （0.433） 5.0±1.0 （0.197±0.039） 5.0±1.0 （0.197±0.039） 0.6±0.05 （0.024±0.004） LHLP12 13.0 （0.512） 16.0 （0.624） 5.0±1.0 （0.197±0.039） 5.0±1.0 （0.197±0.039） 0.6±0.05 （0.024±0.004） LHLP16 17.0 （0.669） 19.0 （0.741） 7.5±1.0 （0.295±0.039） 5.0±1.0 （0.197±0.039） 0.8±0.05 （0.031±0.004） Unit：mm（inch） *Measured at the base of the leads.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_leaded_LH_pack_e-E03R02

LHL08～13 LHL08 LHL10 LHL13 D φ9.0 max （φ0.354 max） φ11.0 max （φ0.433 max） φ14.0 max （φ0.551 max） H1 30.5 max （1.20 max） 34.0 max （1.34 max） 37.0 max （1.46 max） H 18.0＋2.0/－0.0 18.0＋2.0/－0.0 18.0＋2.0/－0.0 H2 9.5 max （0.374 max） 14.0 max （0.551 max） 17.0 max （0.669 max） P 12.7±1.0 （0.500±0.039） 12.7±1.0 （0.500±0.039） 15.0±1.0 （0.591±0.039） P0 12.7±0.3※1 （0.500±0.012） 12.7±0.3※1 （0.500±0.012） 15.0±0.3※1 （0.591±0.012） P1 3.85±0.7 （0.152±0.028） 3.85±0.7 （0.152±0.028） 3.75±0.7 （0.148±0.028） P2 6.35±1.3 （0.250±0.051） 6.35±1.3 （0.250±0.051） 7.50±1.3 （0.295±0.051） F 5.0＋0.8/－0.2 5.0＋0.8/－0.2 7.50＋0.8/－0.2 h 0.0±2.0 （0.0±0.079） 0.0±2.0 （0.0±0.079） 0.0±2.0 （0.0±0.079） W 18.0＋1.0/－0.5 18.0＋1.0/－0.5 18.0＋1.0/－0.5 W0 12.5 min （0.492 min） 12.5 min （0.492 min） 12.5 min （0.492 min） W1 9.0±0.5 （0.354±0.020） 9.0±0.5 （0.354±0.020） 9.0±0.5 （0.354±0.020） W2 3.0 max※2 （0.118 max） 3.0 max※2 （0.118 max） 3.0 max※2 （0.118 max） D0 φ4.0±0.2 （φ0.158±0.008） φ4.0±0.2 （φ0.158±0.008） φ4.0±0.2 （φ0.158±0.008） φd φ0.6±0.05 （φ0.024±0.002） φ0.6±0.05 （φ0.024±0.002） φ0.8±0.05 （φ0.031±0.002） t 0.6±0.3 （0.024±0.012） 0.6±0.3 （0.024±0.012） 0.6±0.3 （0.024±0.012） ※1 Accumulated error for 20 pitches is 1mm. ※2 Bonding tape must not protrude from the base tape.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_leaded_LH_pack_e-E02R01

LHLP10TB Type Symbol Dimensions Symbol Dimensions LHLP10 D φ11.0 max （0.0±0.079） H1 32.0 max H 18.0＋2.0/－0.0 （0.492 min） H2 11.0 max （0.354±0.020） P 12.7±1.0 （0.118 max） P0 12.7±0.3※1 （φ0.158±0.008） P1 3.85±0.7 （φ0.024±0.002） P2 6.35±1.3 （0.024±0.012） F 5.0＋0.8/－0.2 （0.197＋0.031/－0.008） Unit： mm（inch） ※1 Accumulated error for 20 pitches is 1mm. ※2 Bonding tape must not protrude from the base tape.
LHLC08, LHLC10 Type Dimensions LHLC08 9.0 （0.354） 9.5 （0.374） 5.0±1.0 （0.197±0.039） 5.0±1.0 （0.197±0.039） 0.6±0.05 （0.024±0.002） LHLC10 11.0 （0.433） 14.0 （0.551） 5.0±1.0 （0.197±0.039） 5.0±1.0 （0.197±0.039） 0.6±0.05 （0.024±0.002） Unit：mm（inch） *Measured at the base of the leads.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_leaded_LH_pack_e-E02R01 LHLC08 LHLC10 D φ9.0max (φ0.354max） φ11.0max （φ0433max） H1 30.5max （1.20max） 34.0max （1.34max） H 18.0＋2.0/－0.0 18.0＋2.0/－0.0 H2 9.5max （0.374max） 14.0max （0.551max） P 12.7±1.0 （0.500±0.039） 12.7±1.0 （0.500±0.039） P0 12.7±0.3※1 （0.500±0.012） 12.7±0.3※1 （0.500±0.012） P1 3.85±0.7 （0.152±0.028） 3.85±0.7 （0.152±0.028） P2 6.35±1.3 （0.250±0.051） 6.35±1.3 （0.250±0.051） F 5.0＋0.8/－0.2 5.0＋0.8/－0.2 H 0.0±2.0 （0.0±0.079） 0.0±2.0 （0.0±0.079） W 18.0＋1.0/－0.5 18.0＋1.0/－0.5 W0 12.5min （0.492min） 12.5min （0.492min） W1 9.0±0.5 （0.354±0.020） 9.0±0.5 （0.354±0.020） W2 3.0max※2 （0.118max） 3.0max※2 （0.118max） D0 φ4.0±0.2 （φ0.158±0.008） φ4.0±0.2 （φ0.158±0.008） φd φ0.6±0.05 （φ0.024±0.002） φ0.6±0.05 （φ0.024±0.002） t 0.6±0.3 （0.024±0.012） 0.6±0.3 （0.024±0.012） Unit：mm（inch） ※1 Accumulated error for 20 pitches is 1mm. ※2 Bonding tape must not protrude from the base tape.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_leaded_reli_e-E03R02 AXIAL LEADED INDUCTORS（CAL Type）、 RADIAL LEADED INDUCTORS（LH Type）、 LEADED FERRITE BEAD INDUCTORS（ FB Series A Type／R Type） ■RELIABILITY DATA 1. Operating temperature Range Specified Value CAL45 Type －25～＋ 105℃ LHL□□□ FBA/FBR －25～＋ 85℃ Test Methods and Remarks CAL45 Type : Including self-generated heat LHL□□□ : Including se lf-generated heat 2. Storage temperature Range Specified Value CAL45 Type FBA/FBR 3. Rated current Specified Value CAL45 Type Within the specified tolerance LHL□□□ FBA/FBR Test Methods and Remarks CAL45 Type : The maximum DC value having inductance within 10% and temperature increase within 40℃ by the application of DC bias. LHL□□□ : The maximum DC value having inductance decrease within 10% (LHLC08, LHLC10：within 30%) and temperature increase within the following specified temperature by the application of DC bias. Reference temperature : 25℃（LHL08, LHL10, LHL13） : 40℃（LHLC08, LHLC10） FBA/FBR : No disconnection or appearance abnormality by continuous curren t application for 30 min. Change after the application shall be within ±20% of the initial value. This is not guaranteed for electrical characteristics during current application. 4. Impedance Specified Value CAL45 Type LHL□□□ FBA/FBR Within the specified tolerance Test Methods and Remarks FBA/FBR : Measuring equipment : Impedance analyzer (HP4191A) or its equi valent Measuring frequency : Specified frequency 5. Inductance Specified Value CAL45 Type Within the specified tolerance LHL□□□ FBA/FBR Test Methods and Remarks CAL45 Type : Measuring equipment : LCR meter (HP4285A + HP42851A or its equivalent) Measuring frequency : Specified frequency LHL□□□ : Measuring equipment : LCR meter (HP4285A＋HP42851A or its equiva lent) : LCR meter (HP4263A) or its equivalent (at 1kHz) Measuring frequency : Specified frequency

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_leaded_reli_e-E02R01 6. Q Specified Value CAL45 Type LHL□□□ Within the sp ecified tolerance FBA/FBR Test Methods and Remarks LHL□□□ (except LHLP) : Measuring equipment : LCR meter (HP4285A＋HP42851A or its equiv alent) : LCR meter (HP4263A) or its equivalent (at 1kHz) Measuring frequency : Specified frequency 7. DC Resistance Specified Value CAL45 Type Within the specified tolerance LHL□□□ FBA/FBR Test Methods and Remarks Measuring equipment : DC ohmmeter 8. Self resonance frequency Specified Value CAL45 Type LHL□□□ Within the sp ecified tolerance FBA/FBR Test Methods and Remarks LHL□□□(except LHLP) : Measuring equipment : (HP4191A, 4192A) its equivalent 9. Temperature characteristic Specified Value CAL45 Type LHL□□□ △L/L : Within ±7% (ex cept LHLP16 : Within ±20%) FBA/FBR Test Methods and Remarks Change of maximum inductance deviation in step 1 to 5 Step Temperature (℃) LHL□□□ 1 20

2 Minimum operating temperature

3 20 (Standard temperature)

4 Maximum operating temperature

Tensile strength test Specified Value CAL45 Type No abnormality such as cut lead, or looseness. LHL□□□ FBA/FBR Test Methods and Remarks CAL45 Type : Apply the stated tensile force progressively in the direction to draw terminal. force (N) duration (s) 10 10 LHL□□□ : Apply the stated tens ile force progressively in the direction to draw terminal. Nominal wire diameter tensile φd (mm) force (N) duration (s) 0.3＜φd≦0.5 5 30±5 0.5＜φd≦0.8 10 0.8＜φd≦1.2 25 FBA/FBR : The body of a component shall be fixed and a tensile force of 20±1N shall be applied to the lead wire in the axi al direction of the component during 10±1 seconds.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_leaded_reli_e-E02R01 11. Over current Specified Value CAL45 Type No emission of smoke no firing. LHL□□□ There shall be no scorch or short of wire. LHLC08, LHLC10 : There shall be no firing. FBA/FBR Test Methods and Remarks Measuring current : Rated current×2 Duration : 5 min. Number of measuring : one time 12. Terminal strength : bending Specified Value CAL45 Type No abnormality such as cut lead, or looseness. LHL□□□ FBA/FBR Test Methods and Remarks CAL45 Type : Suspend a weight of specified mass at the end of the terminals and incline the body through the angle of 90 degrees and return it to the initial position. This operation is done over a period of 2-3 sec. Then second bend in the opposite direction shall be made. Number of bends : Two times. Nominal wire diameter tensile Bending force Mass reference weight LHL□□□・FBA/FBR : Suspend a weight of specified mass at the end of the terminals and incline the body through the angle of 90 degrees and return it to the initial position. This operation is done over a period of 2-3 sec. Then second bend in the opposite direction shall be made. Number of bends : Two times. Nominal wire diameter tensile Bending force Mass reference weight 0.5＜φd≦0.8 5 0.5 0.8＜φd≦1.2 10 1.0 13. Insulation resistance : between the terminals and body Specified Value CAL45 Type LHL□□□ 100MΩ min. FBA/FBR Test Methods and Remarks LHL□□□ : Applied voltage : 500 VDC Duration : 60 sec. 14. Insulation resistance : between terminals and core Specified Value CAL45 Type LHL□□□ FBA/FBR 1MΩ min. Test Methods and Remarks FBA/FBR : Applied voltage : 100 VDC Duration : 60±5 sec. 15. Withstanding : between the terminals and body Specified Value CAL45 Type LHL□□□ No abnormality such as insulation damage FBA/FBR Test Methods and Remarks LHL□□□ : According to JIS C5102. 7. 1. 3 (C) Metal global method Applied voltage : 500 VDC Duration : 60 sec.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_leaded_reli_e-E02R01 16. DC bias characteristic Specified Value CAL45 Type △L/L : Within －10% LHL□□□ FBA/FBR Test Methods and Remarks CAL45 Type : Measure inductance with application of rated current using LCR meter to compare it with the initial value. 17. Body strength Specified Value CAL45 Type No abnormality as damage. LHL□□□ FBA/FBR No abnormality such as cracks on body. Test Methods and Remarks CAL45 Type : Applied force :50N Duration : 10 sec. Speed : Shall attain to specified force in 2 sec. FBA : Applied force : 50±3N Duration : 30±1 sec. 18. Resistance to vibration Specified Value CAL45 Type △L/L : Within ±5% LHL□□□ Appearance : No abnormality △L/L : Within ±5% Q change : Within ±30% (LHLP : only △L/L) FBA/FBR Appearance : No abnormality Impedance change : Within ±20% Test Methods and Remarks CAL45 Type : Directions : 2 hrs each in X, Y and Z directions total : 6hrs. Frequency range : 10 to 55 to 10Hz (1min.) Amplitude : 1.5mm Mounting method : Soldering onto printed board. Recovery : At least 1hr of recovery under the standard conditio n after the test, followed by the measurement within 2hrs. LHL□□□・FBA/FBR : Directions : 2 hrs each in X, Y and Z directions total : 6hrs. Frequency range : 10 to 55 to 10Hz (1min.) Amplitude : 1.5mm Mounting method : Soldering onto printed board. 19. Resistance to shock Specified Value CAL45 Type No significant abnormality in appearance LHL□□□ FBA/FBR Test Methods and Remarks CAL45 Type : Drop test Impact material : concrete or vinyl tile Height : 1m Total number of drops : 10 times

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_leaded_reli_e-E02R01 20. Solderability Specified Value CAL45 Type At least 75％ of terminal electrode is covered by ne w solder. LHL□□□ At least 75％ of terminal e lectrode is covered by new solder. FBA/FBR At least 90％ of terminal electrode is covered by new s older. Test Methods and Remarks CAL45 Type : Solder temperature : 230±5℃ Duration : 2±0.5 sec. LHL□□□ : Solder temperature : 235±5℃ Duration : 2±0.5 sec. Immersion depth : Up to 1.5mm from bottom of case. FBA/FBR : Solder temperature : 230±5℃ Duration : 3±1 sec. Immersion depth : Up to 1.5mm from terminal root. 21. Resistance to soldering heat Specified Value CAL45 Type △L/L : Within ±5% LHL□□□ No significant abnormality in appearance Inductance change : Within ±5% Q change : Within ±30%(LHLP : only △L/L) FBA/FBR No significant abnormality in appearance Impedance change : Within ±20% Test Methods and Remarks CAL45 Type : Solder temperature : 270±5℃ Duration : 5±0.5 sec. One time Immersed conditions : Inserted into substrate with t=1.6mm Recovery : At least 1hr of recovery under the standard conditi on after the test, followed by the measurement within 2hrs. LHL□□□ : Solder bath method : Solde r temperature : 260±5℃ Duration : 10±1 sec. : Up to 1.5mm from the bottom of case. Manual soldering : Solder temperature : 350±10℃ (At the tip of soldering iron) Duration : 5±1 sec. : Up to 1.5mm from the bottom of case. Caution : No excessive pressing shall be applied to terminals . Recovery : 4 to 24hrs of recovery under the standard conditio n after the test. FBA/FBR : Solder bath method: Condition 1: Solder temperature : 260±5℃ Duration : 10±1 sec. Immersion depth : Up to 1.5mm from the terminal root. Condition 2 : Solder temperature : 350±5℃ Duration : 3±1 sec. Immersion depth : Up to 1.5mm from the terminal root. Recovery : 3hrs of recovery under the standard condition afte r the test. 22. Resistance to solvent Specified Value CAL45 Type Please avoid the ultrasonic cleaning of this produc t. LHL□□□ FBA/FBR No significant abnormality in appearance Impedance change : Within ±20% Test Methods and Remarks FBA/FBR : Solvent temperature : 20～25℃ Duration : 30±5 sec. Solvent type : Acetone Recovery : 3hrs of recovery under the standard condition after the test.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_leaded_reli_e-E02R01 23. Thermal shock Specified Value CAL45 Type △L/L : Within ±10% LHL□□□ Appearance : No abnormality Inductance change : Within ±10% Q change : Within ±30% (LHLP：only △L/L) FBA/FBR Appearance : No abnormality Impedance change : Within ±20% Test Methods and Remarks CAL45 Type：Conditions for 1cycle Step Temperature (℃) Duration (min.) 1 －25＋0/－3 30±3

2 Room temperature Within 3

3 ＋85＋2/－0 30±3

4 Room temperature Within 3

Number of cycles : 5 cycles Recovery : At least 1hr of recovery under the standard conditi o n a f t e r t h e r e m o v a l f r o m t e s t c h a m b e r , f o l l o w e d b y t h e measurement within 2hrs. LHL□□□・FBA/FBR： According to JIS C0025 Conditions for 1 cycle Step Temperature (℃) Duration (min.)

1 Minimum operating temperature＋0/－3 30±3

3 Minimum operating temperature＋2/－0 30±3

Number of cycles : 10 cycles 〔LHL□□□〕 Recovery : 5 cycles (FBA/ FBR) : 4 to 24hrs of recovery under the standard condition after th e removal from the test chamber. 〔LHL□□□〕 : 3hrs of recovery under the standard condition after the remo val from the test chamber. (FBA/ FBR) 24. Damp heat Specified Value CAL45 Type △L/L : Within ±10% LHL□□□ FBA/FBR Appearance：No abnormality Impedance change：Within ±20% Test Methods and Remarks CAL45 Type : Temperature : 40±2℃ Humidity : 90～95%RH Duration : 1000 hrs Recovery : At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs. FBA/FBR : Temperature : 60±2℃ Humidity : 90～95%RH Duration : 1000 hrs Recovery : 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_leaded_reli_e-E02R01 25. Loading under damp heat Specified Value CAL45 Type △L/L : Within ±10% LHL□□□ Appearance : No abnormality Inductance change : Within ±10% Q change : Within ±30% (LHLP : only △L/L) FBA/FBR Test Methods and Remarks CAL45 Type : Temperature : 40±2℃ Humidity : 90～95%RH Duration : 1000 hrs Applied current : Rated current Recovery : At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs. LHL□□□ : Temperature : 40±2℃ Humidity : 90～95%RH Duration : 1000＋48/-0 hrs Applied current : Rated current Recovery : 1 to 2hrs of recovery under the standard condition after the removal from the test chamber. 26. Loading at high temperature Specified Value CAL45 Type △L/L : Within ±10% LHL□□□ FBA/FBR Test Methods and Remarks CAL45 Type : Temperature : 85±2℃ Duration : 1000 hrs Applied current : Rated current Recovery : At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs. 27. Low temperature life test Specified Value CAL45 Type △L/L : Within ±10% LHL□□□ Appearance : No abnormality Inductance change : Within ±10% Q change : Within ±30% (LHLP : only △L/L) FBA/FBR Test Methods and Remarks CAL45 Type : Temperature : －25±2℃ Duration : 1000 hrs Recovery : At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs. LHL□□□ : Temperature :－40±3℃ Duration : 1000＋48/-0 hrs Recovery : 1 to 2hrs of recovery under the standard condition a fter the removal from the test chamber. 28. High temperature life test Specified Value CAL45 Type LHL□□□ Appearance : No abnormality Inductance change : Within ±10% Q change : Within ±30% (LHLP : only △L/L) FBA/FBR Test Methods and Remarks LHL□□□ : Temperature : 105±2℃ Duration : 1000＋48/-0 hrs Recovery : 1 to 2hrs of recovery under the standard condition a fter the removal from the test chamber.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_leaded_prec_e-E02R01 AXIAL LEADED INDUCTORS（CAL Type）、 RADIAL LEADED INDUCTORS（LH Type）、 LEADED FERRITE BEAD INDUCTORS（FB Series A Type／R Type） ■PRECAUTIONS 1. Circuit Design Precautions ◆Operating environment 1. The products described in this specification are intended fo r use in general electronic equi pment,(office supply equipment, telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high reliabi lity (traffic systems, safety equipment, aerospace systems, nuc lear control systems and medical equipment including life-support sy stems,) where product failure might result in loss of life, inj ury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance. 2. PCB Design Precautions ◆Design 1. Please design insertion pitches as matching to that of leads of the component on PCBs. Technical considerations ◆Design 1. When Inductors are mounted onto a PC board, hole dimensions on the board should match the lead pitch of the component, if not, it will cause breakage of the terminals or cracking of terminal roots covered with resin as excess stress travels through the terminal legs. 3. Considerations for automatic placement Precautions ◆Adjustment of mounting machine 1. Excessive impact load should not be imposed on the products when mounting onto the PC boards. 2. Mounting and soldering conditions should be checked beforehand. Technical considerations ◆Adjustment of mounting machine 1. When installing products, care should be taken not to apply distortion stress as it may deform the products. 4. Soldering Precautions ◆Wave soldering 1. Please refer to the specifications in the catalog for a wave soldering. 2. Do not immerse the entire inductor in the flux during the soldering operation. ◆Lead free soldering 1. When using products with lead free soldering, we request to use them after confirming adhesion, temperature of resistance to soldering heat, soldering etc sufficiently. ◆Recommended conditions for using a soldering iron: ・Put the soldering iron on the land-pattern. ・Soldering iron's temperature - Below 350℃ ・Duration - 3 seconds or less ・The soldering iron should not directly touch the inductor. ◆Reflow soldering 1. As for reflow soldering, please contact our sales staff. Technical considerations ◆Lead free soldering 1. If products are used beyond the range of the recommended con ditions, heat stresses may deform the products, and consequentl y degrade the reliability of the products. ◆Recommended conditions for using a soldering iron If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade the reliability of the products. 5. Cleaning Precautions ◆Cleaning conditions 1. CAL type, LH type Please do not do cleaning by a supersonic wave. Technical considerations ◆Cleaning conditions 1. CAL type, LH type, If washing by supersonic waves, supersonic waves may deform products.

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_leaded_prec_e-E02R01 6. Handling Precautions ◆Handling 1. Keep the inductors away from all magnets and magnetic objects. ◆Mechanical considerations 1. Please do not give the inductors any excessive mechanical shocks. 2. LH type If inductors are dropped onto the floor or a hard surface they should not be used. ◆Packing 1. Please do not give the inductors any excessive mechanical shocks. In loading, please pay attention to handling indication mention ed in a packing box (a loading direction / number of maximum lo ading / fragile item). Technical considerations ◆Handling 1. There is a case that a characteristic varies with magnetic influence. ◆Mechanical considerations 1. There is a case to be damaged by a mechanical shock. 2. LH type There is a case to be broken by a fall. ◆Packing 1. There is a case that a lead wire could be deformed by a fall or an excessive shock. 7. Storage conditions Precautions ◆Storage 1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled. Recommended conditions ・Ambient temperature 0～40℃ ・Humidity Below 70% RH The ambient temperature must be kept below 30℃. Even under idea l storage conditions, solderab ility of products electrodes may decrease as time passes. For this reason, inductors should be used within one year from the time of delivery. In case of storage over 6 months, solderability shall be checked before actual usage. Technical considerations ◆Storage 1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of taping/packaging materials may take place.

Product Information

LHL10124J specifications and overview.

Summary

RADIAL LEADED INDUCTORS

Description

RADIAL LEADED INDUCTORS

Source title LHL10124J Datasheet(PDF) - Taiyo Yuden (U.S.A.), Inc

Related Parts

More parts from the same family.

Browse manufacturer