LHC1-2290-1211

DS115 LUMILEDS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 23

Technical content

DS115 LUXEON CoB Core Range Product Datasheet ©2016 Lumileds Holding B.V. All rights reserved. No. E352519 LUXEON CoB Core Range consists of high uniformity LEDs that represent a new breakthrough in efficacy for chip-on-board. Due to its industry- leading small Light Emitting Surfaces (LES), LUXEON CoB arrays are easy to work with, enabling less expensive designs. All emitters within the LUXEON CoB Core Range are available in 3-step MacAdam ellipse, ensuring uniform optical performance in general lighting applications. In addition, LUXEON CoB Core Range LEDs are hot-tested at 85°C—real world operating conditions—which means luminaire design is simplified and testing can be minimized. LUXEON CoB Core Range High-efficacy LED with a small light emitting surface and greater uniformity of light FEATURES AND BENEFITS PRIMARY APPLICATIONS Highest flux densities with industry’s smallest LES Architectural R9 between 80 and 90 for vibrant reds Downlights 3-step MacAdam ellipse color definition: Freedom from Binning for color consistency from luminaire to luminaire High Bay & Low Bay Up to 4x lower thermal resistance than competition, enabling smaller heat sinks and higher lumens Lamps Supported by a comprehensive optical, mechanical and electrical ecosystem Outdoor Specialty Lighting Spotlights NOT RECOMMENDED FOR NEW DESIGNS

• LUXEON CoB Core Range (Gen 3) For NEW designs consider these replacement products:

DS115 LUXEON CoB Core Range Product Datasheet 20161007 ©2016 Lumileds Holding B.V. All rights reserved. i Table of Contents NOT RECOMMENDED FOR NEW DESIGNS

DS115 LUXEON CoB Core Range Product Datasheet 20161007 ©2016 Lumileds Holding B.V. All rights reserved. 2 General Product Information Product Test Conditions LUXEON CoB Core Range LEDs are tested and binned with a drive current of 200mA for LUXEON CoB 1202s and LUXEON CoB 1202, 300mA for LUXEON CoB 1203, 450mA for LUXEON CoB 1204, 600mA for LUXEON CoB 1205, 900mA for LUXEON CoB 1208 and 1200mA for LUXEON 1211 at a junction temperature, Tj, of 85ºC. Part Number Nomenclature Part numbers for LUXEON CoB Core Range follow the convention below: L H C 1 – A A B B – C C C C (Traditional Part Number Scheme) L 2 C 1 – A A B B 1 2 0 2 0 6 A 0 0 (New Part Number Scheme) Where: A A – designates nominal CCT (22=2200K, 27=2700K, 30=3000K, 35=3500K, 40=4000K, 50=5000K, 57=5700K) B B – designates minimum CRI (70=70CRI, 80=80CRI, 90=90CRI) C C C C – designates product configuration (1202=1202, 1203=1203, 1204=1204, 1205=1205, 1208=1208, 1211=1211) Therefore, the following part numbers are used for LUXEON CoB Core Range 1203 3000K CCT 80CRI: L H C 1 – 3 0 8 0 – 1 2 0 3 Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long- term performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON CoB Core Range is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). NOT RECOMMENDED FOR NEW DESIGNS

DS115 LUXEON CoB Core Range Product Datasheet 20161007 ©2016 Lumileds Holding B.V. All rights reserved. 3 Performance Characteristics Product Selection Guide Table 1 . Product performance of LUXEON CoB Core Range at test current, T j=85ºC . PRODUCT NOMINAL CCT MINIMUM CRI [1, 2] LUMINOUS FLUX [1] (lm) TYPICAL LUMINOUS EFFICACY (lm/W) TEST CURRENT (mA) PART NUMBER MINIMUM TYPICAL LUXEON CoB 1202s 2200K 80 550 625 88 200 L2C1-2280120206A00 2700K 80 645 725 101 200 L2C1-2780120206A00 3000K 80 700 775 109 200 L2C1-3080120206A00 3500K 80 700 775 109 200 L2C1-3580120206A00 4000K 80 700 800 113 200 L2C1-4080120206A00 5000K 80 725 825 116 200 L2C1-5080120206A00 2200K 90 450 525 75 200 L2C1-2290120206A00 2700K 90 525 600 85 200 L2C1-2790120206A00 3000K 90 550 625 88 200 L2C1-3090120206A00 3500K 90 575 650 92 200 L2C1-3590120206A00 4000K 90 600 700 100 200 L2C1-4090120206A00 LUXEON CoB 1202 2200K 80 575 650 92 200 LHC1-2280-1202 2700K 80 675 750 106 200 LHC1-2780-1202 3000K 80 725 800 115 200 LHC1-3080-1202 3500K 80 750 825 119 200 LHC1-3580-1202 4000K 80 750 850 122 200 LHC1-4080-1202 5000K 80 775 875 124 200 LHC1-5080-1202 2200K 90 475 550 44 200 LHC1-2290-1202 2700K 90 550 625 90 200 LHC1-2790-1202 3000K 90 575 650 93 200 LHC1-3090-1202 3500K 90 600 675 96 200 LHC1-3590-1202 4000K 90 650 725 100 200 LHC1-4090-1202 LUXEON CoB 1203 3000K 70 1172 1300 122 300 LHC1-3070-1203 3500K 70 1172 1300 122 300 LHC1-3570-1203 4000K 70 1225 1375 130 300 LHC1-4070-1203 5000K 70 1225 1375 130 300 LHC1-5070-1203 5700K 70 1225 1375 130 300 LHC1-5770-1203 2200K 80 825 950 92 300 LHC1-2280-1203 2700K 80 1025 1125 106 300 LHC1-2780-1203 3000K 80 1100 1225 115 300 LHC1-3080-1203 3500K 80 1150 1275 119 300 LHC1-3580-1203 4000K 80 1175 1300 122 300 LHC1-4080-1203 5000K 80 1175 1325 124 300 LHC1-5080-1203 2200K 90 700 825 80 300 LHC1-2290-1203 2700K 90 850 950 90 300 LHC1-2790-1203 3000K 90 900 1000 93 300 LHC1-3090-1203 3500K 90 925 1025 96 300 LHC1-3590-1203 4000K 90 1000 1100 100 300 LHC1-4090-1203 Notes for Table 1 (continued on next page): 1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements. 2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed. NOT RECOMMENDED FOR NEW DESIGNS

DS115 LUXEON CoB Core Range Product Datasheet 20161007 ©2016 Lumileds Holding B.V. All rights reserved. 4 Table 1 Continued . Product performance of LUXEON CoB Core Range at test current, T j=85ºC . PRODUCT NOMINAL CCT MINIMUM CRI [1, 2] LUMINOUS FLUX [1] (lm) TYPICAL LUMINOUS EFFICACY (lm/W) TEST CURRENT (mA) PART NUMBER MINIMUM TYPICAL LUXEON CoB 1204 3000K 70 1725 1950 122 450 LHC1-3070-1204 3500K 70 1725 1950 122 450 LHC1-3570-1204 4000K 70 1825 2050 130 450 LHC1-4070-1204 5000K 70 1825 2050 130 450 LHC1-5070-1204 5700K 70 1825 2050 130 450 LHC1-5770-1204 2200K 80 1325 1475 92 450 LHC1-2280-1204 2700K 80 1550 1700 106 450 LHC1-2780-1204 3000K 80 1625 1825 115 450 LHC1-3080-1204 3500K 80 1725 1900 119 450 LHC1-3580-1204 4000K 80 1725 1950 122 450 LHC1-4080-1204 5000K 80 1750 1975 124 450 LHC1-5080-1204 2200K 90 1075 1250 78 450 LHC1-2290-1204 2700K 90 1275 1425 90 450 LHC1-2790-1204 3000K 90 1325 1475 93 450 LHC1-3090-1204 3500K 90 1400 1525 96 450 LHC1-3590-1204 4000K 90 1450 1600 100 450 LHC1-4090-1204 LUXEON CoB 1205 3000K 70 2325 2600 122 600 LHC1-3070-1205 3500K 70 2325 2600 122 600 LHC1-3570-1205 4000K 70 2450 2750 130 600 LHC1-4070-1205 5000K 70 2450 2750 130 600 LHC1-5070-1205 5700K 70 2450 2750 130 600 LHC1-5770-1205 2200K 80 1700 1950 92 600 LHC1-2280-1205 2700K 80 2000 2250 106 600 LHC1-2780-1205 3000K 80 2200 2450 115 600 LHC1-3080-1205 3500K 80 2250 2550 119 600 LHC1-3580-1205 4000K 80 2325 2600 122 600 LHC1-4080-1205 5000K 80 2350 2650 124 600 LHC1-5080-1205 2200K 90 1400 1600 79 600 LHC1-2290-1205 2700K 90 1700 1900 90 600 LHC1-2790-1205 3000K 90 1800 2000 93 600 LHC1-3090-1205 3500K 90 1850 2075 96 600 LHC1-3590-1205 4000K 90 1925 2150 100 600 LHC1-4090-1205 Notes for Table 1 (continued on next page): 1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements. 2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed. NOT RECOMMENDED FOR NEW DESIGNS

DS115 LUXEON CoB Core Range Product Datasheet 20161007 ©2016 Lumileds Holding B.V. All rights reserved. 5 Table 1 Continued . Product performance of LUXEON CoB Core Range at test current, T j=85ºC . PRODUCT NOMINAL CCT MINIMUM CRI [1, 2] LUMINOUS FLUX [1] (lm) TYPICAL LUMINOUS EFFICACY (lm/W) TEST CURRENT (mA) PART NUMBER MINIMUM TYPICAL LUXEON CoB 1208 3000K 70 3500 3900 122 900 LHC1-3070-1208 3500K 70 3500 3900 122 900 LHC1-3570-1208 4000K 70 3650 4100 130 900 LHC1-4070-1208 5000K 70 3700 4100 130 900 LHC1-5070-1208 5700K 70 3700 4100 130 900 LHC1-5770-1208 2200K 80 2600 2925 92 900 LHC1-2280-1208 2700K 80 3050 3400 106 900 LHC1-2780-1208 3000K 80 3275 3650 115 900 LHC1-3080-1208 3500K 80 3400 3800 119 900 LHC1-3580-1208 4000K 80 3500 3900 122 900 LHC1-4080-1208 5000K 80 3500 3950 124 900 LHC1-5080-1208 2200K 90 2125 2450 79 900 LHC1-2290-1208 2700K 90 2550 2850 90 900 LHC1-2790-1208 3000K 90 2650 2950 93 900 LHC1-3090-1208 3500K 90 2775 3075 96 900 LHC1-3590-1208 4000K 90 2900 3200 100 900 LHC1-4090-1208 LUXEON CoB 1211 3000K 70 4775 5200 122 1200 LHC1-3070-1211 3500K 70 4775 5200 122 1200 LHC1-3570-1211 4000K 70 5050 5600 130 1200 LHC1-4070-1211 5000K 70 5050 5600 130 1200 LHC1-5070-1211 5700K 70 5050 5600 130 1200 LHC1-5770-1211 2200K 80 3550 3975 92 1200 LHC1-2280-1211 2700K 80 4150 4600 106 1200 LHC1-2780-1211 3000K 80 4500 5000 115 1200 LHC1-3080-1211 3500K 80 4675 5200 119 1200 LHC1-3580-1211 4000K 80 4775 5200 122 1200 LHC1-4080-1211 5000K 80 4850 5300 124 1200 LHC1-5080-1211 2200K 90 2925 3425 80 1200 LHC1-2290-1211 2700K 90 3500 3875 90 1200 LHC1-2790-1211 3000K 90 3650 4000 93 1200 LHC1-3090-1211 3500K 90 3775 4200 96 1200 LHC1-3590-1211 4000K 90 4050 4400 100 1200 LHC1-4090-1211 Notes for Table 1: 1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements. 2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed. NOT RECOMMENDED FOR NEW DESIGNS

DS115 LUXEON CoB Core Range Product Datasheet 20161007 ©2016 Lumileds Holding B.V. All rights reserved. 6 Optical Characteristics Table 2 . Optical characteristics for LUXEON CoB Core Range at test current, T j=85°C . PART NUMBER TYPICAL TOTAL INCLUDED ANGLE [1] TYPICAL VIEWING ANGLE [2] L2C1–xxxx120206xxx 135° 115° LHC1-xxxx-xxxx 135° 115° Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. Electrical and Thermal Characteristics Table 3 . Electrical and thermal characteristics for LUXEON CoB Core Range at test current, T j=85ºC . PART NUMBER FORWARD VOLTAGE (V f) [1] TYPICAL TEMPERATURE COEFFICIENT OF FORWARD VOLTAGE [2] (mV/°C) TYPICAL THERMAL RESISTANCE—JUNCTION TO SOLDER PAD (°C/W)MINIMUM TYPICAL MAXIMUM L2CI-xxxx120206xxx 33 35.5 38 -16 0.98 LHC1-xxxx-1202 33 35.5 38 -16 0.98 LHC1-xxxx-1203 33 35.5 38 -16 0.70 LHC1-xxxx-1204 33 35.5 38 -16 0.55 LHC1-xxxx-1205 33 35.5 38 -16 0.51 LHC1-xxxx-1208 33 35.5 38 -16 0.29 LHC1-xxxx-1211 33 35.5 38 -16 0.23 Notes for Table 3: 1. Lumileds maintains a tolerance of ±2% on forward voltage measurements. 2. Measured between 25°C and 85°C. Absolute Maximum Ratings Table 4 . Absolute maximum ratings for LUXEON CoB Core Range . PARAMETER MAXIMUM PERFORMANCE DC Forward Current [1,2] 2x test current [2] LED Junction Temperature [1] (DC & Pulse) 125°C [3] ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 3B Operating Case Temperature [1] -40°C to 105°C LED Storage Temperature -40°C to 120°C Allowable Reflow Cycles 3 Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias Notes for Table 4: 1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met: – The frequency of the ripple current is 100Hz or higher – The average current for each cycle does not exceed the maximum allowable DC forward current – The maximum amplitude of the ripple does not exceed 15% of the maximum allowable DC forward current NOT RECOMMENDED FOR NEW DESIGNS

Table 5. 3-step MacAdam ellipse color bin definitions for LUXEON CoB Core Range.

1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.

Figure 7 . 3-step MacAdam ellipse illustration for Table 5 .

DS115 LUXEON CoB Core Range Product Datasheet 20161007 ©2016 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. About Lumileds Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge. With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by maintaining an unwavering focus on quality, innovation and reliability. To learn more about our portfolio of light engines, visit lumileds.com. NOT RECOMMENDED FOR NEW DESIGNS